Linux SOC development
 help / color / mirror / Atom feed
From: Albert Yang <yangzh0906@thundersoft.com>
To: robh@kernel.org, krzk+dt@kernel.org, krzk@kernel.org,
	conor+dt@kernel.org, gordon.ge@bst.ai, catalin.marinas@arm.com,
	geert.uytterhoeven@gmail.com, will@kernel.org,
	ulf.hansson@linaro.org, adrian.hunter@intel.com, arnd@arndb.de
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-mmc@vger.kernel.org, soc@lists.linux.dev,
	bst-upstream@bstai.top, neil.armstrong@linaro.org,
	jonathan.cameron@huawei.com, bigfoot@classfun.cn,
	kever.yang@rock-chips.com, mani@kernel.org,
	geert+renesas@glider.be, andersson@kernel.org, nm@ti.com,
	nfraprado@collabora.com, quic_tdas@quicinc.com,
	ebiggers@google.com, victor.shih@genesyslogic.com.tw,
	shanchun1218@gmail.com, ben.chuang@genesyslogic.com.tw,
	Albert Yang <yangzh0906@thundersoft.com>
Subject: [PATCH v2 6/8] arm64: dts: bst: add support for Black Sesame Technologies C1200 CDCU1.0 board and defconfig
Date: Wed,  2 Jul 2025 17:44:42 +0800	[thread overview]
Message-ID: <20250702094444.3523973-7-yangzh0906@thundersoft.com> (raw)
In-Reply-To: <20250702094444.3523973-1-yangzh0906@thundersoft.com>

Add device tree support for the Black Sesame Technologies (BST) C1200
CDCU1.0 ADAS 4C2G platform. This platform is based on the BST C1200 SoC
family.

The changes include:
- Adding a new BST device tree directory
- Adding Makefile entries to build the BST platform device trees
- Adding the device tree for the BST C1200 CDCU1.0 ADAS 4C2G board

This board features a quad-core Cortex-A78 CPU, and various peripherals
including UART, MMC, watchdog timer, and interrupt controller.

---
Changes for v2:
1. Reorganized memory map into discrete regions
2. Updated MMC controller definition:
   - Split into core/CRM register regions
   - Removed deprecated properties
   - Updated compatible string
3. Standardized interrupt definitions and numeric formats
4. Removed reserved-memory node (superseded by bounce buffers)
5. Added root compatible string for platform identification
6. Add soc defconfig

Signed-off-by: Ge Gordon <gordon.ge@bst.ai>
Signed-off-by: Albert Yang <yangzh0906@thundersoft.com>
---
 arch/arm64/boot/dts/Makefile                  |   1 +
 arch/arm64/boot/dts/bst/Makefile              |   2 +
 .../dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts    |  60 +++++++++
 arch/arm64/boot/dts/bst/bstc1200.dtsi         | 117 ++++++++++++++++++
 arch/arm64/configs/defconfig                  |   1 +
 5 files changed, 181 insertions(+)
 create mode 100644 arch/arm64/boot/dts/bst/Makefile
 create mode 100644 arch/arm64/boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts
 create mode 100644 arch/arm64/boot/dts/bst/bstc1200.dtsi

diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 79b73a21ddc2..a39b6cafb644 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -12,6 +12,7 @@ subdir-y += arm
 subdir-y += bitmain
 subdir-y += blaize
 subdir-y += broadcom
+subdir-y += bst
 subdir-y += cavium
 subdir-y += exynos
 subdir-y += freescale
diff --git a/arch/arm64/boot/dts/bst/Makefile b/arch/arm64/boot/dts/bst/Makefile
new file mode 100644
index 000000000000..4c1b8b4cdad8
--- /dev/null
+++ b/arch/arm64/boot/dts/bst/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_BST) += bstc1200-cdcu1.0-adas_4c2g.dtb
diff --git a/arch/arm64/boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts b/arch/arm64/boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts
new file mode 100644
index 000000000000..4036e0ac2e1d
--- /dev/null
+++ b/arch/arm64/boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "bstc1200.dtsi"
+
+/ {
+	model = "BST C1200-96 CDCU1.0 4C2G";
+	compatible = "bst,c1200-cdcu1.0-adas-4c2g", "bst,c1200";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@810000000 {
+		device_type = "memory";
+		reg = <0x8 0x10000000 0x0 0x30000000>;
+	};
+
+	memory@8c0000000 {
+		device_type = "memory";
+		reg = <0x8 0xc0000000 0x1 0x0>;
+	};
+
+	memory@c00000000 {
+		device_type = "memory";
+		reg = <0xc 0x0 0x0 0x40000000>;
+	};
+
+	memory@800254000 {
+		device_type = "memory";
+		reg = <0x8 0x254000 0x0 0x1000>;
+	};
+
+	memory@800151000 {
+		device_type = "memory";
+		reg = <0x8 0x151000 0x0 0x1000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		mmc0_reserved: mmc0@5160000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x5160000 0x0 0x10000>;
+			no-map;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+	memory-region = <&mmc0_reserved>;
+};
+
diff --git a/arch/arm64/boot/dts/bst/bstc1200.dtsi b/arch/arm64/boot/dts/bst/bstc1200.dtsi
new file mode 100644
index 000000000000..ddff2cb82cb0
--- /dev/null
+++ b/arch/arm64/boot/dts/bst/bstc1200.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "bst,c1200";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&l2_cache>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&l2_cache>;
+			reg = <0x100>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&l2_cache>;
+			reg = <0x200>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&l2_cache>;
+			reg = <0x300>;
+		};
+
+		l2_cache: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	clk_mmc: clock-4000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <4000000>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		always-on;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x0 0xffffffff 0xffffffff>;
+		interrupt-parent = <&gic>;
+
+		mmc0: mmc@22200000 {
+			compatible = "bst,c1200-dwcmshc-sdhci";
+			reg = <0x0 0x22200000 0x0 0x1000>,
+			      <0x0 0x23006000 0x0 0x1000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_mmc>;
+			clock-names = "core";
+			max-frequency = <200000000>;
+			bus-width = <8>;
+			non-removable;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		uart0: serial@20008000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20008000 0x0 0x1000>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <25000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@32800000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-controller;
+			ranges;
+			reg = <0x0 0x32800000 0x0 0x10000>,
+			      <0x0 0x32880000 0x0 0x100000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+};
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 897fc686e6a9..0a1cfaa19688 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -45,6 +45,7 @@ CONFIG_ARCH_BCMBCA=y
 CONFIG_ARCH_BRCMSTB=y
 CONFIG_ARCH_BERLIN=y
 CONFIG_ARCH_BLAIZE=y
+CONFIG_ARCH_BST=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_ARCH_SPARX5=y
 CONFIG_ARCH_K3=y
-- 
2.25.1


  parent reply	other threads:[~2025-07-02  9:51 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-28  8:54 [PATCH v1 0/9] arm64: Introduce Black Sesame Technologies C1200 SoC and CDCU1.0 board Albert Yang
2025-07-02  9:44 ` [PATCH v2 0/8] " Albert Yang
2025-07-02  9:44   ` [PATCH v2 1/8] dt-bindings: vendor-prefixes: Add Black Sesame Technologies Co., Ltd Albert Yang
2025-07-02 10:24     ` Krzysztof Kozlowski
2025-07-02  9:44   ` [PATCH v2 3/8] arm64: Kconfig: add ARCH_BST for bst silicons Albert Yang
2025-07-02 12:21     ` Krzysztof Kozlowski
2025-07-02  9:44   ` [PATCH v2 4/8] dt-bindings: mmc: add binding for BST DWCMSHC SDHCI controller Albert Yang
2025-07-02 13:28     ` Rob Herring (Arm)
2025-07-02 14:23     ` Rob Herring
2025-07-02  9:44   ` [PATCH v2 5/8] mmc: sdhci: add Black Sesame Technologies BST C1200 controller driver Albert Yang
2025-07-02 10:40     ` Arnd Bergmann
2025-07-02 10:47     ` Krzysztof Kozlowski
2025-07-02  9:44   ` Albert Yang [this message]
2025-07-02 10:30     ` [PATCH v2 6/8] arm64: dts: bst: add support for Black Sesame Technologies C1200 CDCU1.0 board and defconfig Krzysztof Kozlowski
2025-07-02 12:15     ` Robin Murphy
2025-07-02  9:44   ` [PATCH v2 7/8] arm64: defconfig: enable BST C1200 DWCMSHC SDHCI controller Albert Yang
2025-07-02 10:25     ` Krzysztof Kozlowski
2025-07-02  9:44   ` [PATCH v2 8/8] MAINTAINERS: add and consolidate Black Sesame Technologies (BST) ARM SoC support Albert Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250702094444.3523973-7-yangzh0906@thundersoft.com \
    --to=yangzh0906@thundersoft.com \
    --cc=adrian.hunter@intel.com \
    --cc=andersson@kernel.org \
    --cc=arnd@arndb.de \
    --cc=ben.chuang@genesyslogic.com.tw \
    --cc=bigfoot@classfun.cn \
    --cc=bst-upstream@bstai.top \
    --cc=catalin.marinas@arm.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=ebiggers@google.com \
    --cc=geert+renesas@glider.be \
    --cc=geert.uytterhoeven@gmail.com \
    --cc=gordon.ge@bst.ai \
    --cc=jonathan.cameron@huawei.com \
    --cc=kever.yang@rock-chips.com \
    --cc=krzk+dt@kernel.org \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=mani@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=nfraprado@collabora.com \
    --cc=nm@ti.com \
    --cc=quic_tdas@quicinc.com \
    --cc=robh@kernel.org \
    --cc=shanchun1218@gmail.com \
    --cc=soc@lists.linux.dev \
    --cc=ulf.hansson@linaro.org \
    --cc=victor.shih@genesyslogic.com.tw \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox