From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-io1-f54.google.com (mail-io1-f54.google.com [209.85.166.54]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 06A691BC5C for ; Sun, 23 Mar 2025 13:23:45 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.166.54 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1742736228; cv=none; b=GpJbYLhjL5A+5wh5Br36RGzFY5fjQzWWxhiE2Esft5kuYDTJ9U9Gc1eFHxHiutMU5dcqw0oOOCpIWo9WGSNNpCK9E5D+TioFpswoBM+pJTIcwPgMkfMnYZSuyuiMMDzYwNICIltx2X0gBi32iJlt584lahmKR0XTl8O8T5W/KTY= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1742736228; c=relaxed/simple; bh=iIeLJ+9CJr5/8YiOgnNM4Q7aRK/g1TCtMV0NioQugdE=; h=Message-ID:Date:MIME-Version:Subject:To:Cc:References:From: In-Reply-To:Content-Type; b=rYO4B9Uqq+QoedhEThAPdolu2hRM6adFBYFtM/WV0vPlOVQ0FjZH1mGVCWZxGrpj91wzces25S0fBdn1iFMJt39TOtRXyYHUKQ1+PBOrHQ3+Gxuhc8UruzNgtIxzZeD9KBrR4Ogytf23D+p7MJbt955toXP0jh9f6uxMb998Al0= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=riscstar.com; spf=pass smtp.mailfrom=riscstar.com; dkim=pass (2048-bit key) header.d=riscstar-com.20230601.gappssmtp.com header.i=@riscstar-com.20230601.gappssmtp.com header.b=fFAttDSl; arc=none smtp.client-ip=209.85.166.54 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=riscstar.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=riscstar.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=riscstar-com.20230601.gappssmtp.com header.i=@riscstar-com.20230601.gappssmtp.com header.b="fFAttDSl" Received: by mail-io1-f54.google.com with SMTP id ca18e2360f4ac-85db3475637so144446839f.1 for ; Sun, 23 Mar 2025 06:23:45 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=riscstar-com.20230601.gappssmtp.com; s=20230601; t=1742736225; x=1743341025; darn=lists.linux.dev; h=content-transfer-encoding:in-reply-to:from:content-language :references:cc:to:subject:user-agent:mime-version:date:message-id :from:to:cc:subject:date:message-id:reply-to; bh=FTnereCUToCBjbpym0YZFtNwg1Scl5evNKMBH+DpSTo=; b=fFAttDSl+fffy8sDsPqOnXgZ5gvSgOt4qM41ygi0L2faQwb4wQnyIZJwFOJ3NnZ0J/ e0AOKc6xDzvD0P90CIL6qLjt5F7Sm7oP/7VSO8oALvUMOIXQm86YB5LyKV/EW73SbkWZ VLqRwjz70VLAYWEEfNH8pY2Ud+N4Bh/+FhIYOTs/nEqjqST6ZZVsKi7Ma0iuMpOAtFXQ 5HC8GR9M7AORhmUd0syRK3RAwn5cXZTByH4oDBFl5wtmY6ndAf7kqt8bP4N03V6m2EV9 CzYEKDaA1uL1l43ijX4ENcFXt5w4pQoNgP8aTFfd7vEQZT5KVHtkSJJAwiLUUPbPwgxX DSGQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1742736225; x=1743341025; h=content-transfer-encoding:in-reply-to:from:content-language :references:cc:to:subject:user-agent:mime-version:date:message-id :x-gm-message-state:from:to:cc:subject:date:message-id:reply-to; bh=FTnereCUToCBjbpym0YZFtNwg1Scl5evNKMBH+DpSTo=; b=xHIEfCFAqhuShSoqqpggbH87asr3qU/M0ONwoouvU7Ul1qQtDJzJ7nnyl/+2kbXW0Z HowZsa3UH8iOySTk8ASwo/Y7gR5an3enMhKtM4WQ5CePYTe8J67zuItot3nW7PHhjV11 iFsnqt320E8892RwjdaXKeP1ccyapN5vlNetI0x3TC/oi6/PxJfJZhVxrfFLrz9qawrH 6uvWmBICh9bHAtabRw9byQFdlcgPQ00R8X6+HyrVcCnrSHJNBWFNodIw34rHzv41K5YH FPV7ZfLAyyUaRc79LxeQPfjt77oSw2zMlCFE4Fm6vQpJvW8zlJY2Qx1IHGC2Ig5hqPrv ufYw== X-Forwarded-Encrypted: i=1; AJvYcCVAYh6WAU7o3QsUd4WQ5JHErYJbzlOePFRWvSi46pBRxMDb4uSPb+ffzyFhylZjCq3Gen5FiQqQ0g==@lists.linux.dev X-Gm-Message-State: AOJu0YxxJiIbKLaeACluOUNmi3pxaxh/SSyhZO+fj+e53bgFs+gFudE1 cuu52CxnbhRGS96L64kaE4jfb3sL5zXv2zK3MsADZZshkDMY9OuwuRrqGtuTYG8= X-Gm-Gg: ASbGncu55wq9jCkiAOu7NP7uFpsnozdJhHeX+DrHDNKk5X0qq5W3ycuT4xhokGIGe4z WDk7iRSQ1L4DtgT3WNVzXxxQxZG0pmTn6fZ7pka6j8heoXVUyz3fdd/3skBVoFT/PS0FQvX432a njT/eG4MW45+Ox8fV7YZ8NZeKPn3lRQFzrTHIkFbXX47nJgj+OV0cZQWpsPdPgAKzelckr/xd/A E3Lx9Hcl1Z2rRYiswwZOQXXNTK0L7xuJAlarLBKZH5CcMmr/91eb6p7kJxTtSLP+/iVLeuKeY0L RFqwWHeUqC1pf6y3NqYJljh8/Pzrbv/rEzsSFv7bVO/yU8ywYqx097bsFX1w2JLBjqfJIVf4XIp OFzDd0oKaP7kznaNh/Q== X-Google-Smtp-Source: AGHT+IEyiEr0s0I0JWc39bQgGyyEOgsa8Hq3iEeguBlRcgoHvfxYc8cWRzvc6IC340C/Y3c8KTlAwQ== X-Received: by 2002:a05:6602:4a03:b0:85b:41cc:264e with SMTP id ca18e2360f4ac-85e2bf076c2mr785677539f.6.1742736225099; Sun, 23 Mar 2025 06:23:45 -0700 (PDT) Received: from [10.211.55.5] (c-73-228-159-35.hsd1.mn.comcast.net. [73.228.159.35]) by smtp.gmail.com with ESMTPSA id ca18e2360f4ac-85e2bc13d74sm125798039f.11.2025.03.23.06.23.43 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Sun, 23 Mar 2025 06:23:44 -0700 (PDT) Message-ID: Date: Sun, 23 Mar 2025 08:23:43 -0500 Precedence: bulk X-Mailing-List: spacemit@lists.linux.dev List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 User-Agent: Mozilla Thunderbird Subject: Re: [PATCH RESEND 6/7] clk: spacemit: define new syscons with only resets To: Yixun Lan Cc: p.zabel@pengutronix.de, mturquette@baylibre.com, sboyd@kernel.org, robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, heylenay@4d2.org, paul.walmsley@sifive.com, palmer@dabbelt.com, aou@eecs.berkeley.edu, spacemit@lists.linux.dev, devicetree@vger.kernel.org, linux-clk@vger.kernel.org, linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org References: <20250321151831.623575-1-elder@riscstar.com> <20250321151831.623575-7-elder@riscstar.com> <20250322164247-GYD11633@gentoo> Content-Language: en-US From: Alex Elder In-Reply-To: <20250322164247-GYD11633@gentoo> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit On 3/22/25 11:42 AM, Yixun Lan wrote: > Hi Alex: > > It occur to me it's a little odd to implemnt reset driver > for RCPU block, but after check with vendor the RCPU region can > be accessed both by ACPU and RCPU, then I'm fine with this. I implemented just the resets that were found in the downstream code. I first implemented a separate reset driver, very simple, which only implemented the resets. I had a separate DTS binding (like was done for the PLLs). I was ready to post it for review, then noticed that the registers used were shared with clocks. So I merged all of that separate code into the clock driver, as you see here. > ACPU - RISC-V Main CPU, with mmu, running Linux > RCPU - real time CPU, without mmu, running RT-OS I didn't realize there was a separate CPU running its own OS. Is this managed as a remoteproc by the RISC-V AP? The reset signals, I hope, are only touched by the AP and not the real-time CPU. Can you provide any further information about this? > On 10:18 Fri 21 Mar , Alex Elder wrote: >> Enable support for three additional syscon CCUs which support reset >> controls but no clocks: ARCPU, RCPU2, and APBC2. >> >> Signed-off-by: Alex Elder >> --- >> drivers/clk/spacemit/ccu-k1.c | 106 ++++++++++++++++++++++++++++++++++ >> 1 file changed, 106 insertions(+) >> >> diff --git a/drivers/clk/spacemit/ccu-k1.c b/drivers/clk/spacemit/ccu-k1.c >> index 17e321c25959a..bf5a3e2048619 100644 >> --- a/drivers/clk/spacemit/ccu-k1.c >> +++ b/drivers/clk/spacemit/ccu-k1.c >> @@ -130,6 +130,37 @@ >> #define APMU_EMAC0_CLK_RES_CTRL 0x3e4 >> #define APMU_EMAC1_CLK_RES_CTRL 0x3ec >> >> +/* RCPU register offsets */ >> +#define RCPU_SSP0_CLK_RST 0x0028 >> +#define RCPU_I2C0_CLK_RST 0x0030 >> +#define RCPU_UART1_CLK_RST 0x003c >> +#define RCPU_CAN_CLK_RST 0x0048 >> +#define RCPU_IR_CLK_RST 0x004c >> +#define RCPU_UART0_CLK_RST 0x00d8 >> +/* XXX Next one is part of the AUD_AUDCLOCK region @ 0xc0882000 */ > this comment looks odd, XXX? Yeah, I meant to remove that before sending but I forgot. The downstream code treats this one register as being part of the RCPU memory region, and extends that region to be 0x2048 bytes to "fit" it. The hardware documentation actually defines a different "RCPU Audio Clock" memory region, and it might be more correct (though less convenient) to define that as a distinct region of memory. What do you think? -Alex >> +#define AUDIO_HDMI_CLK_CTRL 0x2044 >> + >> +/* RCPU2 register offsets */ >> +#define RCPU2_PWM0_CLK_RST 0x0000 >> +#define RCPU2_PWM1_CLK_RST 0x0004 >> +#define RCPU2_PWM2_CLK_RST 0x0008 >> +#define RCPU2_PWM3_CLK_RST 0x000c >> +#define RCPU2_PWM4_CLK_RST 0x0010 >> +#define RCPU2_PWM5_CLK_RST 0x0014 >> +#define RCPU2_PWM6_CLK_RST 0x0018 >> +#define RCPU2_PWM7_CLK_RST 0x001c >> +#define RCPU2_PWM8_CLK_RST 0x0020 >> +#define RCPU2_PWM9_CLK_RST 0x0024 >> + >> +/* APBC2 register offsets */ >> +#define APBC2_UART1_CLK_RST 0x0000 >> +#define APBC2_SSP2_CLK_RST 0x0004 >> +#define APBC2_TWSI3_CLK_RST 0x0008 >> +#define APBC2_RTC_CLK_RST 0x000c >> +#define APBC2_TIMERS0_CLK_RST 0x0010 >> +#define APBC2_KPC_CLK_RST 0x0014 >> +#define APBC2_GPIO_CLK_RST 0x001c >> + >> struct spacemit_ccu_clk { >> int id; >> struct clk_hw *hw; >> @@ -1781,6 +1812,69 @@ static const struct k1_ccu_data k1_ccu_apmu_data = { >> .rst_data = &apmu_reset_controller_data, >> }; >> >> +static const struct ccu_reset_data rcpu_reset_data[] = { >> + [RST_RCPU_SSP0] = RST_DATA(RCPU_SSP0_CLK_RST, 0, BIT(0)), >> + [RST_RCPU_I2C0] = RST_DATA(RCPU_I2C0_CLK_RST, 0, BIT(0)), >> + [RST_RCPU_UART1] = RST_DATA(RCPU_UART1_CLK_RST, 0, BIT(0)), >> + [RST_RCPU_IR] = RST_DATA(RCPU_CAN_CLK_RST, 0, BIT(0)), >> + [RST_RCPU_CAN] = RST_DATA(RCPU_IR_CLK_RST, 0, BIT(0)), >> + [RST_RCPU_UART0] = RST_DATA(RCPU_UART0_CLK_RST, 0, BIT(0)), >> + [RST_RCPU_HDMI_AUDIO] = RST_DATA(AUDIO_HDMI_CLK_CTRL, 0, BIT(0)), >> +}; >> + >> +static const struct ccu_reset_controller_data rcpu_reset_controller_data = { >> + .count = ARRAY_SIZE(rcpu_reset_data), >> + .data = rcpu_reset_data, >> +}; >> + >> +static struct k1_ccu_data k1_ccu_rcpu_data = { >> + /* No clocks in the RCPU CCU */ >> + .rst_data = &rcpu_reset_controller_data, >> +}; >> + >> +static const struct ccu_reset_data rcpu2_reset_data[] = { >> + [RST_RCPU2_PWM0] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)), >> + [RST_RCPU2_PWM1] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)), >> + [RST_RCPU2_PWM2] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)), >> + [RST_RCPU2_PWM3] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)), >> + [RST_RCPU2_PWM4] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)), >> + [RST_RCPU2_PWM5] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)), >> + [RST_RCPU2_PWM6] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)), >> + [RST_RCPU2_PWM7] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)), >> + [RST_RCPU2_PWM8] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)), >> + [RST_RCPU2_PWM9] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)), >> +}; >> + >> +static const struct ccu_reset_controller_data rcpu2_reset_controller_data = { >> + .count = ARRAY_SIZE(rcpu2_reset_data), >> + .data = rcpu2_reset_data, >> +}; >> + >> +static struct k1_ccu_data k1_ccu_rcpu2_data = { >> + /* No clocks in the RCPU2 CCU */ >> + .rst_data = &rcpu2_reset_controller_data, >> +}; >> + >> +static const struct ccu_reset_data apbc2_reset_data[] = { >> + [RST_APBC2_UART1] = RST_DATA(APBC2_UART1_CLK_RST, BIT(2), (0)), >> + [RST_APBC2_SSP2] = RST_DATA(APBC2_SSP2_CLK_RST, BIT(2), (0)), >> + [RST_APBC2_TWSI3] = RST_DATA(APBC2_TWSI3_CLK_RST, BIT(2), (0)), >> + [RST_APBC2_RTC] = RST_DATA(APBC2_RTC_CLK_RST, BIT(2), (0)), >> + [RST_APBC2_TIMERS0] = RST_DATA(APBC2_TIMERS0_CLK_RST, BIT(2), (0)), >> + [RST_APBC2_KPC] = RST_DATA(APBC2_KPC_CLK_RST, BIT(2), (0)), >> + [RST_APBC2_GPIO] = RST_DATA(APBC2_GPIO_CLK_RST, BIT(2), (0)), >> +}; >> + >> +static const struct ccu_reset_controller_data apbc2_reset_controller_data = { >> + .count = ARRAY_SIZE(apbc2_reset_data), >> + .data = apbc2_reset_data, >> +}; >> + >> +static struct k1_ccu_data k1_ccu_apbc2_data = { >> + /* No clocks in the RCPU2 CCU */ >> + .rst_data = &apbc2_reset_controller_data, >> +}; >> + >> static struct ccu_reset_controller * >> rcdev_to_controller(struct reset_controller_dev *rcdev) >> { >> @@ -1959,6 +2053,18 @@ static const struct of_device_id of_k1_ccu_match[] = { >> .compatible = "spacemit,k1-syscon-apmu", >> .data = &k1_ccu_apmu_data, >> }, >> + { >> + .compatible = "spacemit,k1-syscon-rcpu", >> + .data = &k1_ccu_rcpu_data, >> + }, >> + { >> + .compatible = "spacemit,k1-syscon-rcpu2", >> + .data = &k1_ccu_rcpu2_data, >> + }, >> + { >> + .compatible = "spacemit,k1-syscon-apbc2", >> + .data = &k1_ccu_apbc2_data, >> + }, >> { } >> }; >> MODULE_DEVICE_TABLE(of, of_k1_ccu_match); >> -- >> 2.43.0 >> >