From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: "Andreas Larsson" <andreas@gaisler.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"David S. Miller" <davem@davemloft.net>,
"Geert Uytterhoeven" <geert@linux-m68k.org>,
linux-m68k@lists.linux-m68k.org, linux-mips@vger.kernel.org,
linux-pci@vger.kernel.org, sparclinux@vger.kernel.org,
"Thomas Bogendoerfer" <tsbogend@alpha.franken.de>,
"Christian König" <christian.koenig@amd.com>,
"Yinghai Lu" <yinghai@kernel.org>,
"Igor Mammedov" <imammedo@redhat.com>,
"Rafael J . Wysocki" <rafael@kernel.org>,
"Jonathan Cameron" <Jonathan.Cameron@huawei.com>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
"Krzysztof Wilczyński" <kw@linux.com>,
linux-kernel@vger.kernel.org
Cc: "Michał Winiarski" <michal.winiarski@intel.com>,
linuxppc-dev@lists.ozlabs.org,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 19/24] PCI: Use pbus_select_window_for_type() during mem window sizing
Date: Fri, 22 Aug 2025 17:56:00 +0300 [thread overview]
Message-ID: <20250822145605.18172-20-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20250822145605.18172-1-ilpo.jarvinen@linux.intel.com>
__pci_bus_size_bridges() goes to great lengths of helping
pbus_size_mem() in which types it should put into a particular bridge
window, requiring passing up to three resource type into
pbus_size_mem().
Instead of having complex logic __pci_bus_size_bridges() and a
non-straightforward interface between those functions, use
pbus_select_window_for_type() and pbus_select_window() to find the
correct bridge window and compare if the resources belong to that
window.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/pci/setup-bus.c | 111 +++++++++-------------------------------
1 file changed, 24 insertions(+), 87 deletions(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 281ca5c73c97..28133a9c5f51 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1284,24 +1284,22 @@ static bool pbus_upstream_space_available(struct pci_bus *bus,
* pbus_size_mem() - Size the memory window of a given bus
*
* @bus: The bus
- * @mask: Mask the resource flag, then compare it with type
- * @type: The type of free resource from bridge
- * @type2: Second match type
- * @type3: Third match type
+ * @type: The type of bridge resource
* @min_size: The minimum memory window that must be allocated
* @add_size: Additional optional memory window
* @realloc_head: Track the additional memory window on this list
*
- * Calculate the size of the bus and minimal alignment which guarantees
- * that all child resources fit in this size.
+ * Calculate the size of the bus resource for @type and minimal alignment
+ * which guarantees that all child resources fit in this size.
*
- * Return -ENOSPC if there's no available bus resource of the desired
- * type. Otherwise, set the bus resource start/end to indicate the
- * required size, add things to realloc_head (if supplied), and return 0.
+ * Sets the bus resource start/end to indicate the required size if there an
+ * available unassigned bus resource of the desired @type.
+ *
+ * Adds optional resource requests to the @realloc_head list if it is
+ * supplied.
*/
-static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
- unsigned long type, unsigned long type2,
- unsigned long type3, resource_size_t min_size,
+static void pbus_size_mem(struct pci_bus *bus, unsigned long type,
+ resource_size_t min_size,
resource_size_t add_size,
struct list_head *realloc_head)
{
@@ -1309,19 +1307,18 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
resource_size_t min_align, win_align, align, size, size0, size1 = 0;
resource_size_t aligns[28]; /* Alignments from 1MB to 128TB */
int order, max_order;
- struct resource *b_res = find_bus_resource_of_type(bus,
- mask | IORESOURCE_PREFETCH, type);
+ struct resource *b_res = pbus_select_window_for_type(bus, type);
resource_size_t children_add_size = 0;
resource_size_t children_add_align = 0;
resource_size_t add_align = 0;
resource_size_t relaxed_align;
if (!b_res)
- return -ENOSPC;
+ return;
/* If resource is already assigned, nothing more to do */
if (b_res->parent)
- return 0;
+ return;
memset(aligns, 0, sizeof(aligns));
max_order = 0;
@@ -1338,11 +1335,9 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
if (!pdev_resources_assignable(dev) ||
!pdev_resource_should_fit(dev, r))
continue;
-
- if ((r->flags & mask) != type &&
- (r->flags & mask) != type2 &&
- (r->flags & mask) != type3)
+ if (b_res != pbus_select_window(bus, r))
continue;
+
r_size = resource_size(r);
/* Put SRIOV requested res to the optional list */
@@ -1428,7 +1423,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
pci_info(bus->self, "disabling bridge window %pR to %pR (unused)\n",
b_res, &bus->busn_res);
b_res->flags |= IORESOURCE_DISABLED;
- return 0;
+ return;
}
resource_set_range(b_res, min_align, size0);
@@ -1441,7 +1436,6 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
(unsigned long long) (size1 - size0),
(unsigned long long) add_align);
}
- return 0;
}
unsigned long pci_cardbus_resource_alignment(struct resource *res)
@@ -1546,12 +1540,11 @@ static void pci_bus_size_cardbus(struct pci_bus *bus,
void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head)
{
struct pci_dev *dev;
- unsigned long mask, prefmask, type2 = 0, type3 = 0;
resource_size_t additional_io_size = 0, additional_mmio_size = 0,
additional_mmio_pref_size = 0;
struct resource *pref;
struct pci_host_bridge *host;
- int hdr_type, ret;
+ int hdr_type;
list_for_each_entry(dev, &bus->devices, bus_list) {
struct pci_bus *b = dev->subordinate;
@@ -1601,71 +1594,15 @@ void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head)
pbus_size_io(bus, realloc_head ? 0 : additional_io_size,
additional_io_size, realloc_head);
- /*
- * If there's a 64-bit prefetchable MMIO window, compute
- * the size required to put all 64-bit prefetchable
- * resources in it.
- */
- mask = IORESOURCE_MEM;
- prefmask = IORESOURCE_MEM | IORESOURCE_PREFETCH;
- if (pref && (pref->flags & IORESOURCE_MEM_64)) {
- prefmask |= IORESOURCE_MEM_64;
- ret = pbus_size_mem(bus, prefmask, prefmask,
- prefmask, prefmask,
- realloc_head ? 0 : additional_mmio_pref_size,
- additional_mmio_pref_size, realloc_head);
-
- /*
- * If successful, all non-prefetchable resources
- * and any 32-bit prefetchable resources will go in
- * the non-prefetchable window.
- */
- if (ret == 0) {
- mask = prefmask;
- type2 = prefmask & ~IORESOURCE_MEM_64;
- type3 = prefmask & ~IORESOURCE_PREFETCH;
- }
- }
-
- /*
- * If there is no 64-bit prefetchable window, compute the
- * size required to put all prefetchable resources in the
- * 32-bit prefetchable window (if there is one).
- */
- if (!type2) {
- prefmask &= ~IORESOURCE_MEM_64;
- ret = pbus_size_mem(bus, prefmask, prefmask,
- prefmask, prefmask,
- realloc_head ? 0 : additional_mmio_pref_size,
- additional_mmio_pref_size, realloc_head);
-
- /*
- * If successful, only non-prefetchable resources
- * will go in the non-prefetchable window.
- */
- if (ret == 0)
- mask = prefmask;
- else
- additional_mmio_size += additional_mmio_pref_size;
-
- type2 = type3 = IORESOURCE_MEM;
+ if (pref) {
+ pbus_size_mem(bus,
+ IORESOURCE_MEM | IORESOURCE_PREFETCH |
+ (pref->flags & IORESOURCE_MEM_64),
+ realloc_head ? 0 : additional_mmio_pref_size,
+ additional_mmio_pref_size, realloc_head);
}
- /*
- * Compute the size required to put everything else in the
- * non-prefetchable window. This includes:
- *
- * - all non-prefetchable resources
- * - 32-bit prefetchable resources if there's a 64-bit
- * prefetchable window or no prefetchable window at all
- * - 64-bit prefetchable resources if there's no prefetchable
- * window at all
- *
- * Note that the strategy in __pci_assign_resource() must match
- * that used here. Specifically, we cannot put a 32-bit
- * prefetchable resource in a 64-bit prefetchable window.
- */
- pbus_size_mem(bus, mask, IORESOURCE_MEM, type2, type3,
+ pbus_size_mem(bus, IORESOURCE_MEM,
realloc_head ? 0 : additional_mmio_size,
additional_mmio_size, realloc_head);
break;
--
2.39.5
next prev parent reply other threads:[~2025-08-22 14:59 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-22 14:55 [PATCH 00/24] PCI: Bridge window selection improvements Ilpo Järvinen
2025-08-22 14:55 ` [PATCH 01/24] m68k/PCI: Use pci_enable_resources() in pcibios_enable_device() Ilpo Järvinen
2025-08-22 14:55 ` [PATCH 02/24] sparc/PCI: Remove pcibios_enable_device() as they do nothing extra Ilpo Järvinen
2025-08-22 14:55 ` [PATCH 03/24] MIPS: PCI: Use pci_enable_resources() Ilpo Järvinen
2025-08-28 6:57 ` Thomas Bogendoerfer
2025-08-22 14:55 ` [PATCH 04/24] PCI: Move find_bus_resource_of_type() earlier Ilpo Järvinen
2025-08-22 14:55 ` [PATCH 05/24] PCI: Refactor find_bus_resource_of_type() logic checks Ilpo Järvinen
2025-08-22 14:55 ` [PATCH 06/24] PCI: Always claim bridge window before its setup Ilpo Järvinen
2025-08-22 14:55 ` [PATCH 07/24] PCI: Disable non-claimed bridge window Ilpo Järvinen
2025-08-22 14:55 ` [PATCH 08/24] PCI: Use pci_release_resource() instead of release_resource() Ilpo Järvinen
2025-08-22 14:55 ` [PATCH 09/24] PCI: Enable bridge even if bridge window fails to assign Ilpo Järvinen
2025-08-22 14:55 ` [PATCH 10/24] PCI: Preserve bridge window resource type flags Ilpo Järvinen
2025-08-22 14:55 ` [PATCH 11/24] PCI: Add defines for bridge window indexing Ilpo Järvinen
2025-08-22 14:55 ` [PATCH 12/24] PCI: Add bridge window selection functions Ilpo Järvinen
2025-08-22 14:55 ` [PATCH 13/24] PCI: Fix finding bridge window in pci_reassign_bridge_resources() Ilpo Järvinen
2025-08-22 14:55 ` [PATCH 14/24] PCI: Warn if bridge window cannot be released when resizing BAR Ilpo Järvinen
2025-08-22 14:55 ` [PATCH 15/24] PCI: Use pbus_select_window() during BAR resize Ilpo Järvinen
2025-08-22 14:55 ` [PATCH 16/24] PCI: Use pbus_select_window_for_type() during IO window sizing Ilpo Järvinen
2025-08-22 14:55 ` [PATCH 17/24] PCI: Rename resource variable from r to res Ilpo Järvinen
2025-08-22 14:55 ` [PATCH 18/24] PCI: Use pbus_select_window() in space available checker Ilpo Järvinen
2025-08-22 14:56 ` Ilpo Järvinen [this message]
2025-08-22 14:56 ` [PATCH 20/24] PCI: Refactor distributing available memory to use loops Ilpo Järvinen
2025-08-22 14:56 ` [PATCH 21/24] PCI: Refactor remove_dev_resources() to use pbus_select_window() Ilpo Järvinen
2025-08-22 14:56 ` [PATCH 22/24] PCI: Add pci_setup_one_bridge_window() Ilpo Järvinen
2025-08-22 14:56 ` [PATCH 23/24] PCI: Pass bridge window to pci_bus_release_bridge_resources() Ilpo Järvinen
2025-08-22 14:56 ` [PATCH 24/24] PCI: Alter misleading recursion " Ilpo Järvinen
2025-08-22 15:04 ` [PATCH 00/24] PCI: Bridge window selection improvements Ilpo Järvinen
2025-08-27 22:36 ` Bjorn Helgaas
2025-08-28 16:47 ` Ilpo Järvinen
2025-08-28 17:31 ` Bjorn Helgaas
2025-09-01 8:38 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250822145605.18172-20-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=andreas@gaisler.com \
--cc=bhelgaas@google.com \
--cc=christian.koenig@amd.com \
--cc=davem@davemloft.net \
--cc=geert@linux-m68k.org \
--cc=imammedo@redhat.com \
--cc=kw@linux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=michal.winiarski@intel.com \
--cc=rafael@kernel.org \
--cc=sparclinux@vger.kernel.org \
--cc=tsbogend@alpha.franken.de \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).