public inbox for stable@vger.kernel.org
 help / color / mirror / Atom feed
From: "Heiko Stübner" <heiko@sntech.de>
To: brgl@kernel.org, linusw@kernel.org, Robin Murphy <robin.murphy@arm.com>
Cc: sebastian.reichel@collabora.com, m.szyprowski@samsung.com,
	linux-rockchip@lists.infradead.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: Re: [PATCH] gpio/rockchip: Stop calling pinctrl for set_direction
Date: Mon, 26 Jan 2026 17:38:25 +0100	[thread overview]
Message-ID: <10827351.CDJkKcVGEf@diego> (raw)
In-Reply-To: <bddc0469f25843ca5ae0cf578ab3671435ae98a7.1769429546.git.robin.murphy@arm.com>

Am Montag, 26. Januar 2026, 13:12:26 Mitteleuropäische Normalzeit schrieb Robin Murphy:
> Marking the whole controller as sleeping due to the pinctrl calls in the
> .direction_{input,output} callbacks has the unfortunate side effect that
> legitimate invocations of .get and .set, which cannot themselves sleep,
> in atomic context now spew WARN()s from gpiolib.
> 
> However, as Heiko points out, the driver doing this is a bit silly to
> begin with, as the pinctrl .gpio_set_direction hook doesn't even care
> about the direction, the hook is only used to claim the mux. And sure
> enough, the .gpio_request_enable hook exists to serve this very purpose,
> so switch to that and remove the problematic business entirely.
> 
> Cc: stable@vger.kernel.org
> Fixes: 20cf2aed89ac ("gpio: rockchip: mark the GPIO controller as sleeping")
> Suggested-by: Heiko Stuebner <heiko@sntech.de>
> Signed-off-by: Robin Murphy <robin.murphy@arm.com>

This really looks great and solves the problem of the sleeping gpio-driver
in a nice way. Especially as we really only need the pinmux on request
at all.

Reviewed-by: Heiko Stuebner <heiko@sntech.de>

> ---
> If I don't have to redesign bits of the GPIO subsystem itself, this much
> I can do :)
> 
> Tested on RK3399 NanoPC-T4 with GPIOs with and without explicit pinctrl,
> and PROVE_LOCKING and DEBUG_ATOMIC_SLEEP stayed quiet (although I don't
> think this board has any shared pins)
> ---
>  drivers/gpio/gpio-rockchip.c       | 8 --------
>  drivers/pinctrl/pinctrl-rockchip.c | 9 ++++-----
>  2 files changed, 4 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c
> index bae2061f15fc..0fff4a699f12 100644
> --- a/drivers/gpio/gpio-rockchip.c
> +++ b/drivers/gpio/gpio-rockchip.c
> @@ -18,7 +18,6 @@
>  #include <linux/of.h>
>  #include <linux/of_address.h>
>  #include <linux/of_irq.h>
> -#include <linux/pinctrl/consumer.h>
>  #include <linux/pinctrl/pinconf-generic.h>
>  #include <linux/platform_device.h>
>  #include <linux/regmap.h>
> @@ -164,12 +163,6 @@ static int rockchip_gpio_set_direction(struct gpio_chip *chip,
>  	unsigned long flags;
>  	u32 data = input ? 0 : 1;
>  
> -
> -	if (input)
> -		pinctrl_gpio_direction_input(chip, offset);
> -	else
> -		pinctrl_gpio_direction_output(chip, offset);
> -
>  	raw_spin_lock_irqsave(&bank->slock, flags);
>  	rockchip_gpio_writel_bit(bank, offset, data, bank->gpio_regs->port_ddr);
>  	raw_spin_unlock_irqrestore(&bank->slock, flags);
> @@ -593,7 +586,6 @@ static int rockchip_gpiolib_register(struct rockchip_pin_bank *bank)
>  	gc->ngpio = bank->nr_pins;
>  	gc->label = bank->name;
>  	gc->parent = bank->dev;
> -	gc->can_sleep = true;
>  
>  	ret = gpiochip_add_data(gc, bank);
>  	if (ret) {
> diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
> index e44ef262beec..2fc67aeafdb3 100644
> --- a/drivers/pinctrl/pinctrl-rockchip.c
> +++ b/drivers/pinctrl/pinctrl-rockchip.c
> @@ -3545,10 +3545,9 @@ static int rockchip_pmx_set(struct pinctrl_dev *pctldev, unsigned selector,
>  	return 0;
>  }
>  
> -static int rockchip_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
> -					   struct pinctrl_gpio_range *range,
> -					   unsigned offset,
> -					   bool input)
> +static int rockchip_pmx_gpio_request_enable(struct pinctrl_dev *pctldev,
> +					    struct pinctrl_gpio_range *range,
> +					    unsigned int offset)
>  {
>  	struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
>  	struct rockchip_pin_bank *bank;
> @@ -3562,7 +3561,7 @@ static const struct pinmux_ops rockchip_pmx_ops = {
>  	.get_function_name	= rockchip_pmx_get_func_name,
>  	.get_function_groups	= rockchip_pmx_get_groups,
>  	.set_mux		= rockchip_pmx_set,
> -	.gpio_set_direction	= rockchip_pmx_gpio_set_direction,
> +	.gpio_request_enable	= rockchip_pmx_gpio_request_enable,
>  };
>  
>  /*
> 





  parent reply	other threads:[~2026-01-26 16:38 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-26 12:12 [PATCH] gpio/rockchip: Stop calling pinctrl for set_direction Robin Murphy
2026-01-26 13:48 ` Bartosz Golaszewski
2026-01-27 10:00   ` Linus Walleij
2026-01-26 16:38 ` Heiko Stübner [this message]
2026-01-27  9:09 ` Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=10827351.CDJkKcVGEf@diego \
    --to=heiko@sntech.de \
    --cc=brgl@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=m.szyprowski@samsung.com \
    --cc=robin.murphy@arm.com \
    --cc=sebastian.reichel@collabora.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox