From: <gregkh@linuxfoundation.org>
To: ulrik.debie-os@e2big.org, dmitry.torokhov@gmail.com,
gmoutso@yahoo.co.uk, gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "Input: elantech - fix absolute mode setting on some ASUS laptops" has been added to the 4.0-stable tree
Date: Sat, 02 May 2015 16:33:25 +0200 [thread overview]
Message-ID: <14305772059370@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
Input: elantech - fix absolute mode setting on some ASUS laptops
to the 4.0-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
input-elantech-fix-absolute-mode-setting-on-some-asus-laptops.patch
and it can be found in the queue-4.0 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From bd884149aca61de269fd9bad83fe2a4232ffab21 Mon Sep 17 00:00:00 2001
From: Ulrik De Bie <ulrik.debie-os@e2big.org>
Date: Mon, 6 Apr 2015 15:35:38 -0700
Subject: Input: elantech - fix absolute mode setting on some ASUS laptops
From: Ulrik De Bie <ulrik.debie-os@e2big.org>
commit bd884149aca61de269fd9bad83fe2a4232ffab21 upstream.
On ASUS TP500LN and X750JN, the touchpad absolute mode is reset each
time set_rate is done.
In order to fix this, we will verify the firmware version, and if it
matches the one in those laptops, the set_rate function is overloaded
with a function elantech_set_rate_restore_reg_07 that performs the
set_rate with the original function, followed by a restore of reg_07
(the register that sets the absolute mode on elantech v4 hardware).
Also the ASUS TP500LN and X750JN firmware version, capabilities, and
button constellation is added to elantech.c
Reported-and-tested-by: George Moutsopoulos <gmoutso@yahoo.co.uk>
Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/input/mouse/elantech.c | 22 ++++++++++++++++++++++
drivers/input/mouse/elantech.h | 1 +
2 files changed, 23 insertions(+)
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -893,6 +893,21 @@ static psmouse_ret_t elantech_process_by
}
/*
+ * This writes the reg_07 value again to the hardware at the end of every
+ * set_rate call because the register loses its value. reg_07 allows setting
+ * absolute mode on v4 hardware
+ */
+static void elantech_set_rate_restore_reg_07(struct psmouse *psmouse,
+ unsigned int rate)
+{
+ struct elantech_data *etd = psmouse->private;
+
+ etd->original_set_rate(psmouse, rate);
+ if (elantech_write_reg(psmouse, 0x07, etd->reg_07))
+ psmouse_err(psmouse, "restoring reg_07 failed\n");
+}
+
+/*
* Put the touchpad into absolute mode
*/
static int elantech_set_absolute_mode(struct psmouse *psmouse)
@@ -1094,6 +1109,8 @@ static int elantech_get_resolution_v4(st
* Asus K53SV 0x450f01 78, 15, 0c 2 hw buttons
* Asus G46VW 0x460f02 00, 18, 0c 2 hw buttons
* Asus G750JX 0x360f00 00, 16, 0c 2 hw buttons
+ * Asus TP500LN 0x381f17 10, 14, 0e clickpad
+ * Asus X750JN 0x381f17 10, 14, 0e clickpad
* Asus UX31 0x361f00 20, 15, 0e clickpad
* Asus UX32VD 0x361f02 00, 15, 0e clickpad
* Avatar AVIU-145A2 0x361f00 ? clickpad
@@ -1635,6 +1652,11 @@ int elantech_init(struct psmouse *psmous
goto init_fail;
}
+ if (etd->fw_version == 0x381f17) {
+ etd->original_set_rate = psmouse->set_rate;
+ psmouse->set_rate = elantech_set_rate_restore_reg_07;
+ }
+
if (elantech_set_input_params(psmouse)) {
psmouse_err(psmouse, "failed to query touchpad range.\n");
goto init_fail;
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -142,6 +142,7 @@ struct elantech_data {
struct finger_pos mt[ETP_MAX_FINGERS];
unsigned char parity[256];
int (*send_cmd)(struct psmouse *psmouse, unsigned char c, unsigned char *param);
+ void (*original_set_rate)(struct psmouse *psmouse, unsigned int rate);
};
#ifdef CONFIG_MOUSE_PS2_ELANTECH
Patches currently in stable-queue which might be from ulrik.debie-os@e2big.org are
queue-4.0/input-elantech-fix-absolute-mode-setting-on-some-asus-laptops.patch
reply other threads:[~2015-05-02 14:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=14305772059370@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=dmitry.torokhov@gmail.com \
--cc=gmoutso@yahoo.co.uk \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=ulrik.debie-os@e2big.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).