Patch "MIPS: ralink: Fix bad config symbol in PCI makefile." has been added to the 4.0-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    MIPS: ralink: Fix bad config symbol in PCI makefile.

to the 4.0-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     mips-ralink-fix-bad-config-symbol-in-pci-makefile.patch
and it can be found in the queue-4.0 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From ralf@linux-mips.org  Fri May  8 16:40:47 2015
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 23 Feb 2015 06:17:32 +0100
Subject: MIPS: ralink: Fix bad config symbol in PCI makefile.
To: stable@vger.kernel.org
Message-ID: <3e94c2b670b9f299527533bfa51660c392bba05a.1431087908.git.ralf@linux-mips.org>


From: John Crispin <blogic@openwrt.org>

Commit 93a7de8819a661d06eb11f4de3d6888b9a842b30 upstream.

A wrong symbol is referenced by commit 187c26ddf0b2 ("MIPS: ralink: add rt2880
pci driver"). Fix this by changing it to the correct symbol.

Signed-off-by: John Crispin <blogic@openwrt.org>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9298/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/pci/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -43,7 +43,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1
 obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
 obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
 obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
-obj-$(CONFIG_SOC_RT2880)	+= pci-rt2880.o
+obj-$(CONFIG_SOC_RT288X)	+= pci-rt2880.o
 obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
 obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
 obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o


Patches currently in stable-queue which might be from ralf@linux-mips.org are

queue-4.0/mips-octeon-remove-udelay-causing-huge-irq-latency.patch
queue-4.0/mips-makefile-fix-mips-ase-detection-code.patch
queue-4.0/mips-r4kcache-use-correct-base-register-for-mips-r6-cache-flushes.patch
queue-4.0/mips-fix-cpu_has_mips_r2_exec_hazard.patch
queue-4.0/mips-ralink-fix-bad-config-symbol-in-pci-makefile.patch
queue-4.0/revert-mips-remove-race-window-in-page-fault-handling.patch
queue-4.0/mips-fix-race-condition-in-lazy-cache-flushing.patch
queue-4.0/mips-bcm63xx-move-bcm63xx_gpio_init-to-bcm63xx_register_devices.patch
queue-4.0/mips-octeon-delete-override-of-cpu_has_mips_r2_exec_hazard.patch
queue-4.0/mips-asm-spinlock-fix-addiu-instruction-for-r10000_llsc_war-case.patch
queue-4.0/mips-kconfig-disable-smp-cps-for-64-bit.patch
queue-4.0/mips-bcm47xx-fix-detecting-microsoft-mn-700-asus-wl500g.patch
queue-4.0/mips-octeon-use-correct-csr-to-soft-reset.patch
queue-4.0/revert-mips-avoid-pipeline-stalls-on-some-mips32r2-cores.patch
queue-4.0/mips-octeon-dma-octeon-fix-ohci-usb-config-check.patch
queue-4.0/mips-octeon-fix-pci-interrupt-mapping-for-d-link-dsr-1000n.patch
queue-4.0/mips-kconfig-fix-typo-for-the-r2-to-r6-emulator-kernel-parameter.patch
queue-4.0/ssb-fix-kconfig-dependencies.patch
queue-4.0/mips-kernel-entry.s-set-correct-isa-level-for-mips_ihb.patch
queue-4.0/mips-netlogic-fix-for-sata-phy-init.patch
queue-4.0/mips-ralink-add-missing-symbol-for-ralink_ill_acc.patch
queue-4.0/mips-asm-elf-set-o32-default-fpu-flags.patch
queue-4.0/mips-smp-cps-cpu_set-fpu-mask-if-fpu-present.patch