From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from aserp1040.oracle.com ([141.146.126.69]:30086 "EHLO aserp1040.oracle.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754025AbbEKL0x (ORCPT ); Mon, 11 May 2015 07:26:53 -0400 From: Sasha Levin To: stable@vger.kernel.org, stable-commits@vger.kernel.org Cc: Felipe Balbi , Sasha Levin Subject: [added to the 3.18 stable tree] usb: musb: core: fix TX/RX endpoint order Date: Mon, 11 May 2015 07:17:37 -0400 Message-Id: <1431343152-19437-76-git-send-email-sasha.levin@oracle.com> In-Reply-To: <1431343152-19437-1-git-send-email-sasha.levin@oracle.com> References: <1431343152-19437-1-git-send-email-sasha.levin@oracle.com> Sender: stable-owner@vger.kernel.org List-ID: From: Felipe Balbi This patch has been added to the 3.18 stable tree. If you have any objections, please let us know. =============== [ Upstream commit e3c93e1a3f35be4cf1493d3ccfb0c6d9209e4922 ] As per Mentor Graphics' documentation, we should always handle TX endpoints before RX endpoints. This patch fixes that error while also updating some hard-to-read comments which were scattered around musb_interrupt(). This patch should be backported as far back as possible since this error has been in the driver since it's conception. Cc: Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin --- drivers/usb/musb/musb_core.c | 44 ++++++++++++++++++++++++++------------------ 1 file changed, 26 insertions(+), 18 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index b841ee0..b04b805 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1521,16 +1521,30 @@ irqreturn_t musb_interrupt(struct musb *musb) is_host_active(musb) ? "host" : "peripheral", musb->int_usb, musb->int_tx, musb->int_rx); - /* the core can interrupt us for multiple reasons; docs have - * a generic interrupt flowchart to follow + /** + * According to Mentor Graphics' documentation, flowchart on page 98, + * IRQ should be handled as follows: + * + * . Resume IRQ + * . Session Request IRQ + * . VBUS Error IRQ + * . Suspend IRQ + * . Connect IRQ + * . Disconnect IRQ + * . Reset/Babble IRQ + * . SOF IRQ (we're not using this one) + * . Endpoint 0 IRQ + * . TX Endpoints + * . RX Endpoints + * + * We will be following that flowchart in order to avoid any problems + * that might arise with internal Finite State Machine. */ + if (musb->int_usb) retval |= musb_stage0_irq(musb, musb->int_usb, devctl); - /* "stage 1" is handling endpoint irqs */ - - /* handle endpoint 0 first */ if (musb->int_tx & 1) { if (is_host_active(musb)) retval |= musb_h_ep0_irq(musb); @@ -1538,37 +1552,31 @@ irqreturn_t musb_interrupt(struct musb *musb) retval |= musb_g_ep0_irq(musb); } - /* RX on endpoints 1-15 */ - reg = musb->int_rx >> 1; + reg = musb->int_tx >> 1; ep_num = 1; while (reg) { if (reg & 1) { - /* musb_ep_select(musb->mregs, ep_num); */ - /* REVISIT just retval = ep->rx_irq(...) */ retval = IRQ_HANDLED; if (is_host_active(musb)) - musb_host_rx(musb, ep_num); + musb_host_tx(musb, ep_num); else - musb_g_rx(musb, ep_num); + musb_g_tx(musb, ep_num); } - reg >>= 1; ep_num++; } - /* TX on endpoints 1-15 */ - reg = musb->int_tx >> 1; + reg = musb->int_rx >> 1; ep_num = 1; while (reg) { if (reg & 1) { - /* musb_ep_select(musb->mregs, ep_num); */ - /* REVISIT just retval |= ep->tx_irq(...) */ retval = IRQ_HANDLED; if (is_host_active(musb)) - musb_host_tx(musb, ep_num); + musb_host_rx(musb, ep_num); else - musb_g_tx(musb, ep_num); + musb_g_rx(musb, ep_num); } + reg >>= 1; ep_num++; } -- 2.1.0