Patch "net: phy: Allow EEE for all RGMII variants" has been added to the 3.10-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    net: phy: Allow EEE for all RGMII variants

to the 3.10-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     net-phy-allow-eee-for-all-rgmii-variants.patch
and it can be found in the queue-3.10 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Sat Jun 13 09:49:42 PDT 2015
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Fri, 15 May 2015 16:30:41 -0700
Subject: net: phy: Allow EEE for all RGMII variants

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 7e14069651591c81046ffaec13c3dac8cb70f5fb ]

RGMII interfaces come in multiple flavors: RGMII with transmit or
receive internal delay, no delays at all, or delays in both direction.

This change extends the initial check for PHY_INTERFACE_MODE_RGMII to
cover all of these variants since EEE should be allowed for any of these
modes, since it is a property of the RGMII, hence Gigabit PHY capability
more than the RGMII electrical interface and its delays.

Fixes: a59a4d192166 ("phy: add the EEE support and the way to access to the MMD registers")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/phy.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1022,12 +1022,14 @@ int phy_init_eee(struct phy_device *phyd
 
 	/* According to 802.3az,the EEE is supported only in full duplex-mode.
 	 * Also EEE feature is active when core is operating with MII, GMII
-	 * or RGMII.
+	 * or RGMII (all kinds). Internal PHYs are also allowed to proceed and
+	 * should return an error if they do not support EEE.
 	 */
 	if ((phydev->duplex == DUPLEX_FULL) &&
 	    ((phydev->interface == PHY_INTERFACE_MODE_MII) ||
 	    (phydev->interface == PHY_INTERFACE_MODE_GMII) ||
-	    (phydev->interface == PHY_INTERFACE_MODE_RGMII))) {
+	     (phydev->interface >= PHY_INTERFACE_MODE_RGMII &&
+	      phydev->interface <= PHY_INTERFACE_MODE_RGMII_TXID))) {
 		int eee_lp, eee_cap, eee_adv;
 		u32 lp, cap, adv;
 		int status;


Patches currently in stable-queue which might be from f.fainelli@gmail.com are

queue-3.10/net-phy-allow-eee-for-all-rgmii-variants.patch