Patch "powerpc/powernv: Restore non-volatile CRs after nap" has been added to the 4.0-stable tree

Patch "powerpc/powernv: Restore non-volatile CRs after nap" has been added to the 4.0-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    powerpc/powernv: Restore non-volatile CRs after nap

to the 4.0-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     powerpc-powernv-restore-non-volatile-crs-after-nap.patch
and it can be found in the queue-4.0 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 0aab3747091db309b8a484cfd382a41644552aa3 Mon Sep 17 00:00:00 2001
From: Sam Bobroff <sam.bobroff@au1.ibm.com>
Date: Fri, 1 May 2015 16:50:34 +1000
Subject: powerpc/powernv: Restore non-volatile CRs after nap

From: Sam Bobroff <sam.bobroff@au1.ibm.com>

commit 0aab3747091db309b8a484cfd382a41644552aa3 upstream.

Patches 7cba160ad "powernv/cpuidle: Redesign idle states management"
and 77b54e9f2 "powernv/powerpc: Add winkle support for offline cpus"
use non-volatile condition registers (cr2, cr3 and cr4) early in the system
reset interrupt handler (system_reset_pSeries()) before it has been determined
if state loss has occurred. If state loss has not occurred, control returns via
the power7_wakeup_noloss() path which does not restore those condition
registers, leaving them corrupted.

Fix this by restoring the condition registers in the power7_wakeup_noloss()
case.

This is apparent when running a KVM guest on hardware that does not
support winkle or sleep and the guest makes use of secondary threads. In
practice this means Power7 machines, though some early unreleased Power8
machines may also be susceptible.

The secondary CPUs are taken off line before the guest is started and
they call pnv_smp_cpu_kill_self(). This checks support for sleep
states (in this case there is no support) and power7_nap() is called.

When the CPU is woken, power7_nap() returns and because the CPU is
still off line, the main while loop executes again. The sleep states
support test is executed again, but because the tested values cannot
have changed, the compiler has optimized the test away and instead we
rely on the result of the first test, which has been left in cr3
and/or cr4. With the result overwritten, the wrong branch is taken and
power7_winkle() is called on a CPU that does not support it, leading
to it stalling.

Fixes: 7cba160ad789 ("powernv/cpuidle: Redesign idle states management")
Fixes: 77b54e9f213f ("powernv/powerpc: Add winkle support for offline cpus")
[mpe: Massage change log a bit more]
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/idle_power7.S |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -500,9 +500,11 @@ BEGIN_FTR_SECTION
 	CHECK_HMI_INTERRUPT
 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
 	ld	r1,PACAR1(r13)
+	ld	r6,_CCR(r1)
 	ld	r4,_MSR(r1)
 	ld	r5,_NIP(r1)
 	addi	r1,r1,INT_FRAME_SIZE
+	mtcr	r6
 	mtspr	SPRN_SRR1,r4
 	mtspr	SPRN_SRR0,r5
 	rfid


Patches currently in stable-queue which might be from sam.bobroff@au1.ibm.com are

queue-4.0/powerpc-powernv-restore-non-volatile-crs-after-nap.patch