stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: Ying.Liu@freescale.com, gregkh@linuxfoundation.org,
	peter.chen@freescale.com, tomi.valkeinen@ti.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "video: mxsfb: Make sure axi clock is enabled when accessing registers" has been added to the 4.1-stable tree
Date: Thu, 16 Jul 2015 19:42:40 -0700	[thread overview]
Message-ID: <143710096017279@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    video: mxsfb: Make sure axi clock is enabled when accessing registers

to the 4.1-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     video-mxsfb-make-sure-axi-clock-is-enabled-when-accessing-registers.patch
and it can be found in the queue-4.1 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 2fa3b4c4a78a5db3502ab9e32630ea660ff923d0 Mon Sep 17 00:00:00 2001
From: Liu Ying <Ying.Liu@freescale.com>
Date: Fri, 3 Apr 2015 12:51:05 +0800
Subject: video: mxsfb: Make sure axi clock is enabled when accessing registers

From: Liu Ying <Ying.Liu@freescale.com>

commit 2fa3b4c4a78a5db3502ab9e32630ea660ff923d0 upstream.

The LCDIF engines embedded in i.MX6sl and i.MX6sx SoCs need the axi clock
as the engine's system clock.  The clock should be enabled when accessing
LCDIF registers, otherwise the kernel would hang up.  We should also keep
the clock enabled when the engine is being active to scan out frames from
memory.  This patch makes sure the axi clock is enabled when accessing
registers so that the kernel hang up issue can be fixed.

Reported-by: Peter Chen <peter.chen@freescale.com>
Tested-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/video/fbdev/mxsfb.c |   68 ++++++++++++++++++++++++++++++++++----------
 1 file changed, 54 insertions(+), 14 deletions(-)

--- a/drivers/video/fbdev/mxsfb.c
+++ b/drivers/video/fbdev/mxsfb.c
@@ -316,6 +316,18 @@ static int mxsfb_check_var(struct fb_var
 	return 0;
 }
 
+static inline void mxsfb_enable_axi_clk(struct mxsfb_info *host)
+{
+	if (host->clk_axi)
+		clk_prepare_enable(host->clk_axi);
+}
+
+static inline void mxsfb_disable_axi_clk(struct mxsfb_info *host)
+{
+	if (host->clk_axi)
+		clk_disable_unprepare(host->clk_axi);
+}
+
 static void mxsfb_enable_controller(struct fb_info *fb_info)
 {
 	struct mxsfb_info *host = to_imxfb_host(fb_info);
@@ -333,14 +345,13 @@ static void mxsfb_enable_controller(stru
 		}
 	}
 
-	if (host->clk_axi)
-		clk_prepare_enable(host->clk_axi);
-
 	if (host->clk_disp_axi)
 		clk_prepare_enable(host->clk_disp_axi);
 	clk_prepare_enable(host->clk);
 	clk_set_rate(host->clk, PICOS2KHZ(fb_info->var.pixclock) * 1000U);
 
+	mxsfb_enable_axi_clk(host);
+
 	/* if it was disabled, re-enable the mode again */
 	writel(CTRL_DOTCLK_MODE, host->base + LCDC_CTRL + REG_SET);
 
@@ -380,11 +391,11 @@ static void mxsfb_disable_controller(str
 	reg = readl(host->base + LCDC_VDCTRL4);
 	writel(reg & ~VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4);
 
+	mxsfb_disable_axi_clk(host);
+
 	clk_disable_unprepare(host->clk);
 	if (host->clk_disp_axi)
 		clk_disable_unprepare(host->clk_disp_axi);
-	if (host->clk_axi)
-		clk_disable_unprepare(host->clk_axi);
 
 	host->enabled = 0;
 
@@ -421,6 +432,8 @@ static int mxsfb_set_par(struct fb_info
 		mxsfb_disable_controller(fb_info);
 	}
 
+	mxsfb_enable_axi_clk(host);
+
 	/* clear the FIFOs */
 	writel(CTRL1_FIFO_CLEAR, host->base + LCDC_CTRL1 + REG_SET);
 
@@ -438,6 +451,7 @@ static int mxsfb_set_par(struct fb_info
 		ctrl |= CTRL_SET_WORD_LENGTH(3);
 		switch (host->ld_intf_width) {
 		case STMLCDIF_8BIT:
+			mxsfb_disable_axi_clk(host);
 			dev_err(&host->pdev->dev,
 					"Unsupported LCD bus width mapping\n");
 			return -EINVAL;
@@ -451,6 +465,7 @@ static int mxsfb_set_par(struct fb_info
 		writel(CTRL1_SET_BYTE_PACKAGING(0x7), host->base + LCDC_CTRL1);
 		break;
 	default:
+		mxsfb_disable_axi_clk(host);
 		dev_err(&host->pdev->dev, "Unhandled color depth of %u\n",
 				fb_info->var.bits_per_pixel);
 		return -EINVAL;
@@ -504,6 +519,8 @@ static int mxsfb_set_par(struct fb_info
 			fb_info->fix.line_length * fb_info->var.yoffset,
 			host->base + host->devdata->next_buf);
 
+	mxsfb_disable_axi_clk(host);
+
 	if (reenable)
 		mxsfb_enable_controller(fb_info);
 
@@ -582,10 +599,14 @@ static int mxsfb_pan_display(struct fb_v
 
 	offset = fb_info->fix.line_length * var->yoffset;
 
+	mxsfb_enable_axi_clk(host);
+
 	/* update on next VSYNC */
 	writel(fb_info->fix.smem_start + offset,
 			host->base + host->devdata->next_buf);
 
+	mxsfb_disable_axi_clk(host);
+
 	return 0;
 }
 
@@ -608,13 +629,17 @@ static int mxsfb_restore_mode(struct mxs
 	unsigned line_count;
 	unsigned period;
 	unsigned long pa, fbsize;
-	int bits_per_pixel, ofs;
+	int bits_per_pixel, ofs, ret = 0;
 	u32 transfer_count, vdctrl0, vdctrl2, vdctrl3, vdctrl4, ctrl;
 
+	mxsfb_enable_axi_clk(host);
+
 	/* Only restore the mode when the controller is running */
 	ctrl = readl(host->base + LCDC_CTRL);
-	if (!(ctrl & CTRL_RUN))
-		return -EINVAL;
+	if (!(ctrl & CTRL_RUN)) {
+		ret = -EINVAL;
+		goto err;
+	}
 
 	vdctrl0 = readl(host->base + LCDC_VDCTRL0);
 	vdctrl2 = readl(host->base + LCDC_VDCTRL2);
@@ -635,7 +660,8 @@ static int mxsfb_restore_mode(struct mxs
 		break;
 	case 1:
 	default:
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err;
 	}
 
 	fb_info->var.bits_per_pixel = bits_per_pixel;
@@ -673,10 +699,14 @@ static int mxsfb_restore_mode(struct mxs
 
 	pa = readl(host->base + host->devdata->cur_buf);
 	fbsize = fb_info->fix.line_length * vmode->yres;
-	if (pa < fb_info->fix.smem_start)
-		return -EINVAL;
-	if (pa + fbsize > fb_info->fix.smem_start + fb_info->fix.smem_len)
-		return -EINVAL;
+	if (pa < fb_info->fix.smem_start) {
+		ret = -EINVAL;
+		goto err;
+	}
+	if (pa + fbsize > fb_info->fix.smem_start + fb_info->fix.smem_len) {
+		ret = -EINVAL;
+		goto err;
+	}
 	ofs = pa - fb_info->fix.smem_start;
 	if (ofs) {
 		memmove(fb_info->screen_base, fb_info->screen_base + ofs, fbsize);
@@ -689,7 +719,11 @@ static int mxsfb_restore_mode(struct mxs
 	clk_prepare_enable(host->clk);
 	host->enabled = 1;
 
-	return 0;
+err:
+	if (ret)
+		mxsfb_disable_axi_clk(host);
+
+	return ret;
 }
 
 static int mxsfb_init_fbinfo_dt(struct mxsfb_info *host,
@@ -915,7 +949,9 @@ static int mxsfb_probe(struct platform_d
 	}
 
 	if (!host->enabled) {
+		mxsfb_enable_axi_clk(host);
 		writel(0, host->base + LCDC_CTRL);
+		mxsfb_disable_axi_clk(host);
 		mxsfb_set_par(fb_info);
 		mxsfb_enable_controller(fb_info);
 	}
@@ -954,11 +990,15 @@ static void mxsfb_shutdown(struct platfo
 	struct fb_info *fb_info = platform_get_drvdata(pdev);
 	struct mxsfb_info *host = to_imxfb_host(fb_info);
 
+	mxsfb_enable_axi_clk(host);
+
 	/*
 	 * Force stop the LCD controller as keeping it running during reboot
 	 * might interfere with the BootROM's boot mode pads sampling.
 	 */
 	writel(CTRL_RUN, host->base + LCDC_CTRL + REG_CLR);
+
+	mxsfb_disable_axi_clk(host);
 }
 
 static struct platform_driver mxsfb_driver = {


Patches currently in stable-queue which might be from Ying.Liu@freescale.com are

queue-4.1/video-mxsfb-make-sure-axi-clock-is-enabled-when-accessing-registers.patch

                 reply	other threads:[~2015-07-17  2:42 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=143710096017279@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=Ying.Liu@freescale.com \
    --cc=peter.chen@freescale.com \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).