Patch "PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI" has been added to the 4.2-stable tree

Patch "PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI" has been added to the 4.2-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI

to the 4.2-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     pci-disable-async-suspend-resume-for-jmicron-multi-function-sata-ahci.patch
and it can be found in the queue-4.2 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 91f15fb30c77d4a0d0d9b97e5cec647650853145 Mon Sep 17 00:00:00 2001
From: Zhang Rui <rui.zhang@intel.com>
Date: Mon, 24 Aug 2015 15:27:11 -0500
Subject: PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI

From: Zhang Rui <rui.zhang@intel.com>

commit 91f15fb30c77d4a0d0d9b97e5cec647650853145 upstream.

On multi-function JMicron SATA/PATA/AHCI devices, the PATA controller at
function 1 doesn't work if it is powered on before the SATA controller at
function 0.  The result is that PATA doesn't work after resume, and we
print messages like this:

  pata_jmicron 0000:02:00.1: Refused to change power state, currently in D3
  irq 17: nobody cared (try booting with the "irqpoll" option)

Async resume was introduced in v3.15 by 76569faa62c4 ("PM / sleep:
Asynchronous threads for resume_noirq").  Prior to that, we powered on
the functions in order, so this problem shouldn't happen.

e6b7e41cdd8c ("ata: Disabling the async PM for JMicron chip 363/361")
solved the problem for JMicron 361 and 363 devices.  With async suspend
disabled, we always power on function 0 before function 1.

Barto then reported the same problem with a JMicron 368 (see comment #57 in
the bugzilla).

Rather than extending the blacklist piecemeal, disable async suspend for
all JMicron multi-function SATA/PATA/AHCI devices.

This quirk could stay in the ahci and pata_jmicron drivers, but it's likely
the problem will occur even if pata_jmicron isn't loaded until after the
suspend/resume.  Making it a PCI quirk ensures that we'll preserve the
power-on order even if the drivers aren't loaded.

[bhelgaas: changelog, limit to multi-function, limit to IDE/ATA]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=81551
Reported-and-tested-by: Barto <mister.freeman@laposte.net>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/ahci.c         |   13 +------------
 drivers/ata/pata_jmicron.c |   12 ------------
 drivers/pci/quirks.c       |   12 ++++++++++++
 3 files changed, 13 insertions(+), 24 deletions(-)

--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -351,6 +351,7 @@ static const struct pci_device_id ahci_p
 	/* JMicron 362B and 362C have an AHCI function with IDE class code */
 	{ PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr },
 	{ PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr },
+	/* May need to update quirk_jmicron_async_suspend() for additions */
 
 	/* ATI */
 	{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
@@ -1451,18 +1452,6 @@ static int ahci_init_one(struct pci_dev
 	else if (pdev->vendor == 0x177d && pdev->device == 0xa01c)
 		ahci_pci_bar = AHCI_PCI_BAR_CAVIUM;
 
-	/*
-	 * The JMicron chip 361/363 contains one SATA controller and one
-	 * PATA controller,for powering on these both controllers, we must
-	 * follow the sequence one by one, otherwise one of them can not be
-	 * powered on successfully, so here we disable the async suspend
-	 * method for these chips.
-	 */
-	if (pdev->vendor == PCI_VENDOR_ID_JMICRON &&
-		(pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 ||
-		pdev->device == PCI_DEVICE_ID_JMICRON_JMB361))
-		device_disable_async_suspend(&pdev->dev);
-
 	/* acquire resources */
 	rc = pcim_enable_device(pdev);
 	if (rc)
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -143,18 +143,6 @@ static int jmicron_init_one (struct pci_
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
 
-	/*
-	 * The JMicron chip 361/363 contains one SATA controller and one
-	 * PATA controller,for powering on these both controllers, we must
-	 * follow the sequence one by one, otherwise one of them can not be
-	 * powered on successfully, so here we disable the async suspend
-	 * method for these chips.
-	 */
-	if (pdev->vendor == PCI_VENDOR_ID_JMICRON &&
-		(pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 ||
-		pdev->device == PCI_DEVICE_ID_JMICRON_JMB361))
-		device_disable_async_suspend(&pdev->dev);
-
 	return ata_pci_bmdma_init_one(pdev, ppi, &jmicron_sht, NULL, 0);
 }
 
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1569,6 +1569,18 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDO
 
 #endif
 
+static void quirk_jmicron_async_suspend(struct pci_dev *dev)
+{
+	if (dev->multifunction) {
+		device_disable_async_suspend(&dev->dev);
+		dev_info(&dev->dev, "async suspend disabled to avoid multi-function power-on ordering issue\n");
+	}
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, 8, quirk_jmicron_async_suspend);
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0, quirk_jmicron_async_suspend);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x2362, quirk_jmicron_async_suspend);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x236f, quirk_jmicron_async_suspend);
+
 #ifdef CONFIG_X86_IO_APIC
 static void quirk_alder_ioapic(struct pci_dev *pdev)
 {


Patches currently in stable-queue which might be from rui.zhang@intel.com are

queue-4.2/pci-disable-async-suspend-resume-for-jmicron-multi-function-sata-ahci.patch