patch "serial: 8250: add uart_config entry for PORT_RT2880" added to tty-linus

patch "serial: 8250: add uart_config entry for PORT_RT2880" added to tty-linus

[gregkh]

This is a note to let you know that I've just added the patch titled

    serial: 8250: add uart_config entry for PORT_RT2880

to my tty git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
in the tty-linus branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.

If you have any questions about this process, please let me know.


>From 3c5a0357fdb3a9116a48dbdb0abb91fd23fbff80 Mon Sep 17 00:00:00 2001
From: Mans Rullgard <mans@mansr.com>
Date: Fri, 2 Oct 2015 17:50:31 +0100
Subject: serial: 8250: add uart_config entry for PORT_RT2880

This adds an entry to the uart_config table for PORT_RT2880
enabling rx/tx FIFOs.  The UART is actually a Palmchip BK-3103
which is found in several devices from Alchemy/RMI, Ralink, and
Sigma Designs.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_port.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index b1e0ba3e525b..0bbf34035d6a 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -261,6 +261,14 @@ configured less than Maximum supported fifo bytes */
 				  UART_FCR7_64BYTE,
 		.flags		= UART_CAP_FIFO,
 	},
+	[PORT_RT2880] = {
+		.name		= "Palmchip BK-3103",
+		.fifo_size	= 16,
+		.tx_loadsz	= 16,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.rxtrig_bytes	= {1, 4, 8, 14},
+		.flags		= UART_CAP_FIFO,
+	},
 };
 
 /* Uart divisor latch read */
-- 
2.6.0