Patch "ARM: dts: omap3-beagle: make i2c3, ddc and tfp410 gpio work again" has been added to the 4.2-stable tree

Patch "ARM: dts: omap3-beagle: make i2c3, ddc and tfp410 gpio work again" has been added to the 4.2-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    ARM: dts: omap3-beagle: make i2c3, ddc and tfp410 gpio work again

to the 4.2-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm-dts-omap3-beagle-make-i2c3-ddc-and-tfp410-gpio-work-again.patch
and it can be found in the queue-4.2 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 3a2fa775bd1d0579113666c1a2e37654a34018a0 Mon Sep 17 00:00:00 2001
From: Carl Frederik Werner <frederik@cfbw.eu>
Date: Wed, 2 Sep 2015 10:07:57 +0900
Subject: ARM: dts: omap3-beagle: make i2c3, ddc and tfp410 gpio work again

From: Carl Frederik Werner <frederik@cfbw.eu>

commit 3a2fa775bd1d0579113666c1a2e37654a34018a0 upstream.

Let's fix pinmux address of gpio 170 used by tfp410 powerdown-gpio.

According to the OMAP35x Technical Reference Manual
  CONTROL_PADCONF_I2C3_SDA[15:0]  0x480021C4 mode0: i2c3_sda
  CONTROL_PADCONF_I2C3_SDA[31:16] 0x480021C4 mode4: gpio_170
the pinmux address of gpio 170 must be 0x480021C6.

The former wrong address broke i2c3 (used by hdmi ddc), resulting in
kernel message:
  omap_i2c 48060000.i2c: controller timed out

Fixes: 8cecf52befd7 ("ARM: omap3-beagle.dts: add display information")
Signed-off-by: Carl Frederik Werner <frederik@cfbw.eu>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/omap3-beagle.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -202,7 +202,7 @@
 
 	tfp410_pins: pinmux_tfp410_pins {
 		pinctrl-single,pins = <
-			0x194 (PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
+			0x196 (PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
 		>;
 	};
 


Patches currently in stable-queue which might be from frederik@cfbw.eu are

queue-4.2/arm-dts-omap3-beagle-make-i2c3-ddc-and-tfp410-gpio-work-again.patch