stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: clsoto@linux.vnet.ibm.com, davem@davemloft.net,
	gregkh@linuxfoundation.org, jackm@dev.mellanox.co.il,
	ogerlitz@mellanox.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "net/mlx4: Copy/set only sizeof struct mlx4_eqe bytes" has been added to the 4.1-stable tree
Date: Tue, 17 Nov 2015 14:39:31 -0800	[thread overview]
Message-ID: <144779997114588@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    net/mlx4: Copy/set only sizeof struct mlx4_eqe bytes

to the 4.1-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     net-mlx4-copy-set-only-sizeof-struct-mlx4_eqe-bytes.patch
and it can be found in the queue-4.1 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Tue Nov 17 14:35:45 PST 2015
From: Carol L Soto <clsoto@linux.vnet.ibm.com>
Date: Tue, 27 Oct 2015 17:36:20 +0200
Subject: net/mlx4: Copy/set only sizeof struct mlx4_eqe bytes

From: Carol L Soto <clsoto@linux.vnet.ibm.com>

[ Upstream commit c02b05011fadf8e409e41910217ca689f2fc9d91 ]

When doing memcpy/memset of EQEs, we should use sizeof struct
mlx4_eqe as the base size and not caps.eqe_size which could be bigger.

If caps.eqe_size is bigger than the struct mlx4_eqe then we corrupt
data in the master context.

When using a 64 byte stride, the memcpy copied over 63 bytes to the
slave_eq structure.  This resulted in copying over the entire eqe of
interest, including its ownership bit -- and also 31 bytes of garbage
into the next WQE in the slave EQ -- which did NOT include the ownership
bit (and therefore had no impact).

However, once the stride is increased to 128, we are overwriting the
ownership bits of *three* eqes in the slave_eq struct.  This results
in an incorrect ownership bit for those eqes, which causes the eq to
seem to be full. The issue therefore surfaced only once 128-byte EQEs
started being used in SRIOV and (overarchitectures that have 128/256
byte cache-lines such as PPC) - e.g after commit 77507aa249ae
"net/mlx4_core: Enable CQE/EQE stride support".

Fixes: 08ff32352d6f ('mlx4: 64-byte CQE/EQE support')
Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx4/cmd.c |    2 +-
 drivers/net/ethernet/mellanox/mlx4/eq.c  |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -2382,7 +2382,7 @@ int mlx4_multi_func_init(struct mlx4_dev
 			}
 		}
 
-		memset(&priv->mfunc.master.cmd_eqe, 0, dev->caps.eqe_size);
+		memset(&priv->mfunc.master.cmd_eqe, 0, sizeof(struct mlx4_eqe));
 		priv->mfunc.master.cmd_eqe.type = MLX4_EVENT_TYPE_CMD;
 		INIT_WORK(&priv->mfunc.master.comm_work,
 			  mlx4_master_comm_channel);
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -185,7 +185,7 @@ static void slave_event(struct mlx4_dev
 		return;
 	}
 
-	memcpy(s_eqe, eqe, dev->caps.eqe_size - 1);
+	memcpy(s_eqe, eqe, sizeof(struct mlx4_eqe) - 1);
 	s_eqe->slave_id = slave;
 	/* ensure all information is written before setting the ownersip bit */
 	dma_wmb();


Patches currently in stable-queue which might be from clsoto@linux.vnet.ibm.com are

queue-4.1/net-mlx4-copy-set-only-sizeof-struct-mlx4_eqe-bytes.patch

                 reply	other threads:[~2015-11-17 22:39 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=144779997114588@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=clsoto@linux.vnet.ibm.com \
    --cc=davem@davemloft.net \
    --cc=jackm@dev.mellanox.co.il \
    --cc=ogerlitz@mellanox.com \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).