From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.linuxfoundation.org ([140.211.169.12]:47196 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750867AbbKQWui (ORCPT ); Tue, 17 Nov 2015 17:50:38 -0500 Subject: patch "usb: gadget: atmel_usba_udc: Expose correct device speed" added to usb-linus To: dgilbert@interlog.com, balbi@ti.com, boris.brezillon@free-electrons.com, stable@vger.kernel.org From: Date: Tue, 17 Nov 2015 14:50:34 -0800 Message-ID: <144780063465232@kroah.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ANSI_X3.4-1968 Content-Transfer-Encoding: 8bit Sender: stable-owner@vger.kernel.org List-ID: This is a note to let you know that I've just added the patch titled usb: gadget: atmel_usba_udc: Expose correct device speed to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >>From d134c48d889ddceadf4c990e6f3df16b816ed5d4 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Mon, 16 Nov 2015 19:22:08 +0100 Subject: usb: gadget: atmel_usba_udc: Expose correct device speed Following changes that appeared in lk 4.0.0, the gadget udc driver for some ARM based Atmel SoCs (e.g. at91sam9x5 and sama5d3 families) incorrectly deduced full-speed USB link speed even when the hardware had negotiated a high-speed link. The fix is to make sure that the UDPHS Interrupt Enable Register value does not mask the SPEED bit in the Interrupt Status Register. For a mass storage gadget this problem lead to failures when the host had a USB 3 port with the xhci_hcd driver. If the host was a USB 2 port using the ehci_hcd driver then the mass storage gadget worked (but probably at a lower speed than it should have). Signed-off-by: Douglas Gilbert Reviewed-by: Boris Brezillon Cc: #4.0+ Fixes: 9870d895ad87 ("usb: atmel_usba_udc: Mask status with enabled irqs") Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/atmel_usba_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index f0f2b066ac08..f92f5aff0dd5 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -1633,7 +1633,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) spin_lock(&udc->lock); int_enb = usba_int_enb_get(udc); - status = usba_readl(udc, INT_STA) & int_enb; + status = usba_readl(udc, INT_STA) & (int_enb | USBA_HIGH_SPEED); DBG(DBG_INT, "irq, status=%#08x\n", status); if (status & USBA_DET_SUSPEND) { -- 2.6.2