* FAILED: patch "[PATCH] staging/wilc: fix Kconfig dependencies, second try" failed to apply to 4.2-stable tree
@ 2015-12-07 8:42 gregkh
0 siblings, 0 replies; 2+ messages in thread
From: gregkh @ 2015-12-07 8:42 UTC (permalink / raw)
To: arnd, gregkh; +Cc: stable
The patch below does not apply to the 4.2-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From bcc43a4b5ed75285aeacf2cf8d9b96d6379fb429 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Fri, 16 Oct 2015 22:45:39 +0200
Subject: [PATCH] staging/wilc: fix Kconfig dependencies, second try
My first attempt to fix the Kconfig logic for wilc1000 was incomplete,
as it missed the case where SPI is built-in while SDIO is modular
and wilc1000 is configured as built-in in SPI mode (or vice versa),
which would still lead to a link failure.
This works around the problem by adding an intermediate Kconfig
symbol "WILC1000_DRIVER" that controls visibility of the SDIO and
SPI sub-drivers, so we can control the dependencies better.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 9535ebc5e9cc ("staging/wilc1000: fix Kconfig dependencies")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/wilc1000/Kconfig b/drivers/staging/wilc1000/Kconfig
index 59ccecc316df..ee51b4278088 100644
--- a/drivers/staging/wilc1000/Kconfig
+++ b/drivers/staging/wilc1000/Kconfig
@@ -1,14 +1,16 @@
-config WILC1000
- tristate "WILC1000 support (WiFi only)"
- depends on !S390
+config WILC1000_DRIVER
+ bool "WILC1000 support (WiFi only)"
depends on CFG80211 && WEXT_CORE && INET
- depends on MMC || SPI
---help---
This module only support IEEE 802.11n WiFi.
+if WILC1000_DRIVER
+
+config WILC1000
+ tristate
+
choice
prompt "Memory Allocation"
- depends on WILC1000
default WILC1000_PREALLOCATE_AT_LOADING_DRIVER
config WILC1000_PREALLOCATE_AT_LOADING_DRIVER
@@ -29,12 +31,12 @@ endchoice
choice
prompt "Bus Type"
- depends on WILC1000
default WILC1000_SDIO
- config WILC1000_SDIO
+config WILC1000_SDIO
bool "SDIO support"
depends on MMC
+ select WILC1000
---help---
This module adds support for the SDIO interface of adapters using
WILC1000 chipset. The Atmel WILC1000 SDIO is a full speed interface.
@@ -45,8 +47,9 @@ choice
To use this interface, pin9 (SDIO_SPI_CFG) must be grounded. Select
this if your platform is using the SDIO bus.
- config WILC1000_SPI
+config WILC1000_SPI
depends on SPI
+ select WILC1000
bool "SPI support"
---help---
This module adds support for the SPI interface of adapters using
@@ -60,7 +63,7 @@ endchoice
config WILC1000_HW_OOB_INTR
bool "Use out of band interrupt"
- depends on WILC1000 && WILC1000_SDIO
+ depends on WILC1000_SDIO
default n
---help---
This option enables out-of-band interrupt support for the WILC1000
@@ -68,3 +71,5 @@ config WILC1000_HW_OOB_INTR
mechanism for SDIO host controllers that don't support SDIO interrupt.
Select this option If the SDIO host controller in your platform
doesn't support SDIO time devision interrupt.
+
+endif
^ permalink raw reply related [flat|nested] 2+ messages in thread
* FAILED: patch "[PATCH] staging/wilc: fix Kconfig dependencies, second try" failed to apply to 4.2-stable tree
@ 2015-12-07 8:42 gregkh
0 siblings, 0 replies; 2+ messages in thread
From: gregkh @ 2015-12-07 8:42 UTC (permalink / raw)
To: arnd, gregkh; +Cc: stable
The patch below does not apply to the 4.2-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From bcc43a4b5ed75285aeacf2cf8d9b96d6379fb429 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Fri, 16 Oct 2015 22:45:39 +0200
Subject: [PATCH] staging/wilc: fix Kconfig dependencies, second try
My first attempt to fix the Kconfig logic for wilc1000 was incomplete,
as it missed the case where SPI is built-in while SDIO is modular
and wilc1000 is configured as built-in in SPI mode (or vice versa),
which would still lead to a link failure.
This works around the problem by adding an intermediate Kconfig
symbol "WILC1000_DRIVER" that controls visibility of the SDIO and
SPI sub-drivers, so we can control the dependencies better.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 9535ebc5e9cc ("staging/wilc1000: fix Kconfig dependencies")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/wilc1000/Kconfig b/drivers/staging/wilc1000/Kconfig
index 59ccecc316df..ee51b4278088 100644
--- a/drivers/staging/wilc1000/Kconfig
+++ b/drivers/staging/wilc1000/Kconfig
@@ -1,14 +1,16 @@
-config WILC1000
- tristate "WILC1000 support (WiFi only)"
- depends on !S390
+config WILC1000_DRIVER
+ bool "WILC1000 support (WiFi only)"
depends on CFG80211 && WEXT_CORE && INET
- depends on MMC || SPI
---help---
This module only support IEEE 802.11n WiFi.
+if WILC1000_DRIVER
+
+config WILC1000
+ tristate
+
choice
prompt "Memory Allocation"
- depends on WILC1000
default WILC1000_PREALLOCATE_AT_LOADING_DRIVER
config WILC1000_PREALLOCATE_AT_LOADING_DRIVER
@@ -29,12 +31,12 @@ endchoice
choice
prompt "Bus Type"
- depends on WILC1000
default WILC1000_SDIO
- config WILC1000_SDIO
+config WILC1000_SDIO
bool "SDIO support"
depends on MMC
+ select WILC1000
---help---
This module adds support for the SDIO interface of adapters using
WILC1000 chipset. The Atmel WILC1000 SDIO is a full speed interface.
@@ -45,8 +47,9 @@ choice
To use this interface, pin9 (SDIO_SPI_CFG) must be grounded. Select
this if your platform is using the SDIO bus.
- config WILC1000_SPI
+config WILC1000_SPI
depends on SPI
+ select WILC1000
bool "SPI support"
---help---
This module adds support for the SPI interface of adapters using
@@ -60,7 +63,7 @@ endchoice
config WILC1000_HW_OOB_INTR
bool "Use out of band interrupt"
- depends on WILC1000 && WILC1000_SDIO
+ depends on WILC1000_SDIO
default n
---help---
This option enables out-of-band interrupt support for the WILC1000
@@ -68,3 +71,5 @@ config WILC1000_HW_OOB_INTR
mechanism for SDIO host controllers that don't support SDIO interrupt.
Select this option If the SDIO host controller in your platform
doesn't support SDIO time devision interrupt.
+
+endif
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-12-07 12:23 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-12-07 8:42 FAILED: patch "[PATCH] staging/wilc: fix Kconfig dependencies, second try" failed to apply to 4.2-stable tree gregkh
-- strict thread matches above, loose matches on Subject: below --
2015-12-07 8:42 gregkh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).