From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Kamal Mostafa To: linux-kernel@vger.kernel.org, stable@vger.kernel.org, kernel-team@lists.ubuntu.com Cc: Li Jun , Peter Chen , Kamal Mostafa Subject: [PATCH 4.2.y-ckt 026/305] usb: chipidea: debug: disable usb irq while role switch Date: Fri, 15 Jan 2016 15:57:20 -0800 Message-Id: <1452902519-2754-27-git-send-email-kamal@canonical.com> In-Reply-To: <1452902519-2754-1-git-send-email-kamal@canonical.com> References: <1452902519-2754-1-git-send-email-kamal@canonical.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: 4.2.8-ckt2 -stable review patch. If anyone has any objections, please let me know. ---8<------------------------------------------------------------ From: Li Jun commit 251b3c8b57481bcecd3f753108e36e7389ce12ac upstream. Since the ci->role will be set after the host role start is complete, there will be nobody cared irq during start host if usb irq enabled. This error can be reproduced on i.mx6 sololite EVK board by: 1. disable otg id irq(IDIE) and disable all real otg properties of usbotg1 in dts. 2. boot up the board with ID cable and usb device connected. 3. echo gadget > /sys/kernel/debug/ci_hdrc.0/role 4. echo host > /sys/kernel/debug/ci_hdrc.0/role 5. irq 212: nobody cared. Signed-off-by: Li Jun Signed-off-by: Peter Chen Signed-off-by: Kamal Mostafa --- drivers/usb/chipidea/debug.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c index 5b7061a..6a4151c 100644 --- a/drivers/usb/chipidea/debug.c +++ b/drivers/usb/chipidea/debug.c @@ -316,8 +316,10 @@ static ssize_t ci_role_write(struct file *file, const char __user *ubuf, if (role == CI_ROLE_END || role == ci->role) return -EINVAL; + disable_irq(ci->irq); ci_role_stop(ci); ret = ci_role_start(ci, role); + enable_irq(ci->irq); return ret ? ret : count; } -- 1.9.1