From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.linuxfoundation.org ([140.211.169.12]:46095 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1161294AbcA1QdR (ORCPT ); Thu, 28 Jan 2016 11:33:17 -0500 Subject: patch "USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable" added to usb-linus To: gregkh@linuxfoundation.org, harald.linden@7183.org, johan@kernel.org, stable@vger.kernel.org From: Date: Thu, 28 Jan 2016 08:33:14 -0800 Message-ID: <1453998794220133@kroah.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ANSI_X3.4-1968 Content-Transfer-Encoding: 8bit Sender: stable-owner@vger.kernel.org List-ID: This is a note to let you know that I've just added the patch titled USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >>From e03cdf22a2727c60307be6a729233edab3bfda9c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 19 Jan 2016 23:43:13 -0800 Subject: USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable Harald Linden reports that the ftdi_sio driver works properly for the Yaesu SCU-18 cable if the device ids are added to the driver. So let's add them. Reported-by: Harald Linden Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index a5a0376bbd48..8c660ae401d8 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -824,6 +824,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, + { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_SCU18) }, { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, /* Papouch devices based on FTDI chip */ diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 67c6d4469730..a84df2513994 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -615,6 +615,7 @@ */ #define RATOC_VENDOR_ID 0x0584 #define RATOC_PRODUCT_ID_USB60F 0xb020 +#define RATOC_PRODUCT_ID_SCU18 0xb03a /* * Infineon Technologies -- 2.7.0