patch "iio:adc:ti_am335x_adc Fix buffered mode by identifying as software" added to staging-linus

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    iio:adc:ti_am335x_adc Fix buffered mode by identifying as software

to my staging git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
in the staging-linus branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.

If you have any questions about this process, please let me know.


>From 9d0be85d4e2cfa2519ae16efe7ff4a7150c43c0b Mon Sep 17 00:00:00 2001
From: Jonathan Cameron <jic23@kernel.org>
Date: Fri, 1 Jan 2016 18:05:34 +0000
Subject: iio:adc:ti_am335x_adc Fix buffered mode by identifying as software
 buffer.

Whilst this part has a hardware buffer, the identifcation that IIO cares
about is the userspace facing end.  It this case we push individual elements
from the hardware fifo into the software interface (specifically a kfifo)
rather than providing direct reads through to a hardware buffer
(as we still do in the sca3000 for example).

Technically the original specification as a hardware buffer could be
considered wrong, but it didn't matter until the patch listed below.

Result is that any attempt to enable the buffer will return -EINVAL

Fixes: 225d59adf1c8 ("iio: Specify supported modes for buffers")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
---
 drivers/iio/adc/ti_am335x_adc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 942320e32753..c1e05532d437 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -289,7 +289,7 @@ static int tiadc_iio_buffered_hardware_setup(struct iio_dev *indio_dev,
 		goto error_kfifo_free;
 
 	indio_dev->setup_ops = setup_ops;
-	indio_dev->modes |= INDIO_BUFFER_HARDWARE;
+	indio_dev->modes |= INDIO_BUFFER_SOFTWARE;
 
 	return 0;
 
-- 
2.7.0