From: <gregkh@linuxfoundation.org>
To: <alexander.deucher@amd.com>, <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "drm/radeon: clean up fujitsu quirks" has been added to the 4.4-stable tree
Date: Tue, 01 Mar 2016 20:00:54 +0000 [thread overview]
Message-ID: <1456862452250140@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
drm/radeon: clean up fujitsu quirks
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
drm-radeon-clean-up-fujitsu-quirks.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 0eb1c3d4084eeb6fb3a703f88d6ce1521f8fcdd1 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@amd.com>
Date: Thu, 17 Dec 2015 12:52:17 -0500
Subject: drm/radeon: clean up fujitsu quirks
From: Alex Deucher <alexander.deucher@amd.com>
commit 0eb1c3d4084eeb6fb3a703f88d6ce1521f8fcdd1 upstream.
Combine the two quirks.
bug:
https://bugzilla.kernel.org/show_bug.cgi?id=109481
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/radeon/radeon_atombios.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -437,7 +437,9 @@ static bool radeon_atom_apply_quirks(str
}
/* Fujitsu D3003-S2 board lists DVI-I as DVI-D and VGA */
- if (((dev->pdev->device == 0x9802) || (dev->pdev->device == 0x9806)) &&
+ if (((dev->pdev->device == 0x9802) ||
+ (dev->pdev->device == 0x9805) ||
+ (dev->pdev->device == 0x9806)) &&
(dev->pdev->subsystem_vendor == 0x1734) &&
(dev->pdev->subsystem_device == 0x11bd)) {
if (*connector_type == DRM_MODE_CONNECTOR_VGA) {
@@ -448,14 +450,6 @@ static bool radeon_atom_apply_quirks(str
}
}
- /* Fujitsu D3003-S2 board lists DVI-I as DVI-I and VGA */
- if ((dev->pdev->device == 0x9805) &&
- (dev->pdev->subsystem_vendor == 0x1734) &&
- (dev->pdev->subsystem_device == 0x11bd)) {
- if (*connector_type == DRM_MODE_CONNECTOR_VGA)
- return false;
- }
-
return true;
}
Patches currently in stable-queue which might be from alexander.deucher@amd.com are
queue-4.4/drm-amdgpu-fix-s4-resume.patch
queue-4.4/drm-amdgpu-use-post-decrement-in-error-handling.patch
queue-4.4/drm-radeon-properly-byte-swap-vce-firmware-setup.patch
queue-4.4/drm-amdgpu-drop-topaz-support-from-gmc8-module.patch
queue-4.4/drm-amdgpu-remove-exp-hardware-support-from-iceland.patch
queue-4.4/drm-add-drm_fixp_from_fraction-and-drm_fixp2int_ceil.patch
queue-4.4/drm-amdgpu-fix-issue-with-overlapping-userptrs.patch
queue-4.4/drm-radeon-fix-dp-audio-support-for-apu-with-dce4.1-display-engine.patch
queue-4.4/drm-amdgpu-pull-topaz-gmc-bits-into-gmc_v7.patch
queue-4.4/drm-radeon-clean-up-fujitsu-quirks.patch
queue-4.4/drm-amdgpu-the-vi-specific-exe-bit-should-only-apply-to-gmc-v8.0-above.patch
queue-4.4/drm-radeon-cleaned-up-vco-output-settings-for-dp-audio.patch
queue-4.4/drm-radeon-call-hpd_irq_event-on-resume.patch
queue-4.4/drm-amdgpu-move-gmc7-support-out-of-cik-dependency.patch
queue-4.4/drm-amdgpu-iceland-use-ci-based-mc-ip.patch
queue-4.4/drm-dp-mst-process-broadcast-messages-correctly.patch
queue-4.4/drm-amdgpu-fix-amdgpu_bo_pin_restricted-vram-placing-v2.patch
queue-4.4/drm-radeon-mask-out-wc-from-bo-on-unsupported-arches.patch
queue-4.4/drm-dp-mst-fix-in-rad-element-access.patch
queue-4.4/drm-amdgpu-remove-unnecessary-forward-declaration.patch
queue-4.4/drm-dp-mst-move-guid-storage-from-mgr-port-to-only-mst-branch.patch
queue-4.4/drm-amdgpu-fix-tonga-smu-resume.patch
queue-4.4/drm-amdgpu-don-t-load-mec2-on-topaz.patch
queue-4.4/drm-amdgpu-no-need-to-load-mc-firmware-on-fiji.patch
queue-4.4/drm-amdgpu-pm-adjust-display-configuration-after-powerstate.patch
queue-4.4/drm-add-helper-to-check-for-wc-memory-support.patch
queue-4.4/drm-dp-mst-always-send-reply-for-up-request.patch
queue-4.4/drm-amdgpu-don-t-hang-in-amdgpu_flip_work_func-on-disabled-crtc.patch
queue-4.4/drm-amdgpu-call-hpd_irq_event-on-resume.patch
queue-4.4/drm-dp-mst-calculate-mst-pbn-with-31.32-fixed-point.patch
queue-4.4/drm-amdgpu-hold-reference-to-fences-in-amdgpu_sa_bo_new-v2.patch
queue-4.4/drm-radeon-fix-slow-audio-over-dp-on-dce8.patch
queue-4.4/drm-dp-mst-fix-in-mstb-rad-initialization.patch
queue-4.4/drm-dp-mst-reverse-order-of-mst-enable-and-clearing-vc-payload-table.patch
queue-4.4/drm-radeon-add-a-common-function-for-dfs-handling.patch
reply other threads:[~2016-03-01 20:00 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456862452250140@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=alexander.deucher@amd.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox