[PATCH 1/3] USB: mct_u232: add sanity checking in probe

[PATCH 1/3] USB: mct_u232: add sanity checking in probe

[Johan Hovold]

From: Oliver Neukum <oneukum@suse.com>

An attack using the lack of sanity checking in probe is known. This
patch checks for the existence of a second port.

CVE-2016-3136

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
CC: stable@vger.kernel.org
[johan: add error message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/mct_u232.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 4446b8d70ac2..885655315de1 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -376,14 +376,21 @@ static void mct_u232_msr_to_state(struct usb_serial_port *port,
 
 static int mct_u232_port_probe(struct usb_serial_port *port)
 {
+	struct usb_serial *serial = port->serial;
 	struct mct_u232_private *priv;
 
+	/* check first to simplify error handling */
+	if (!serial->port[1] || !serial->port[1]->interrupt_in_urb) {
+		dev_err(&port->dev, "expected endpoint missing\n");
+		return -ENODEV;
+	}
+
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
 	/* Use second interrupt-in endpoint for reading. */
-	priv->read_urb = port->serial->port[1]->interrupt_in_urb;
+	priv->read_urb = serial->port[1]->interrupt_in_urb;
 	priv->read_urb->context = port;
 
 	spin_lock_init(&priv->lock);
-- 
2.7.3

[PATCH 2/3] USB: cypress_m8: add endpoint sanity check

[Johan Hovold]

From: Oliver Neukum <oneukum@suse.com>

An attack using missing endpoints exists.

CVE-2016-3137

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
CC: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/cypress_m8.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index b283eb8b86d6..bbeeb2bd55a8 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -447,6 +447,11 @@ static int cypress_generic_port_probe(struct usb_serial_port *port)
 	struct usb_serial *serial = port->serial;
 	struct cypress_private *priv;
 
+	if (!port->interrupt_out_urb || !port->interrupt_in_urb) {
+		dev_err(&port->dev, "required endpoint is missing\n");
+		return -ENODEV;
+	}
+
 	priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
@@ -606,12 +611,6 @@ static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
 		cypress_set_termios(tty, port, &priv->tmp_termios);
 
 	/* setup the port and start reading from the device */
-	if (!port->interrupt_in_urb) {
-		dev_err(&port->dev, "%s - interrupt_in_urb is empty!\n",
-			__func__);
-		return -1;
-	}
-
 	usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
 		usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
 		port->interrupt_in_urb->transfer_buffer,
-- 
2.7.3

[PATCH 3/3] USB: digi_acceleport: do sanity checking for the number of ports

[Johan Hovold]

From: Oliver Neukum <oneukum@suse.com>

The driver can be crashed with devices that expose crafted descriptors
with too few endpoints.

See: http://seclists.org/bugtraq/2016/Mar/61

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
[johan: fix OOB endpoint check and add error messages ]
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/digi_acceleport.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 010a42a92688..16e8e37b3b36 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -1251,8 +1251,27 @@ static int digi_port_init(struct usb_serial_port *port, unsigned port_num)
 
 static int digi_startup(struct usb_serial *serial)
 {
+	struct device *dev = &serial->interface->dev;
 	struct digi_serial *serial_priv;
 	int ret;
+	int i;
+
+	/* check whether the device has the expected number of endpoints */
+	if (serial->num_port_pointers < serial->type->num_ports + 1) {
+		dev_err(dev, "OOB endpoints missing\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < serial->type->num_ports + 1 ; i++) {
+		if (!serial->port[i]->read_urb) {
+			dev_err(dev, "bulk-in endpoint missing\n");
+			return -ENODEV;
+		}
+		if (!serial->port[i]->write_urb) {
+			dev_err(dev, "bulk-out endpoint missing\n");
+			return -ENODEV;
+		}
+	}
 
 	serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
 	if (!serial_priv)
-- 
2.7.3