Patch "Revert "PCI: imx6: Add support for active-low reset GPIO"" has been added to the 4.5-stable tree

Patch "Revert "PCI: imx6: Add support for active-low reset GPIO"" has been added to the 4.5-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    Revert "PCI: imx6: Add support for active-low reset GPIO"

to the 4.5-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     revert-pci-imx6-add-support-for-active-low-reset-gpio.patch
and it can be found in the queue-4.5 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From b2d7a9cd3ff8ec561348267c2ef7d47b2b91e801 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@nxp.com>
Date: Mon, 28 Mar 2016 18:45:36 -0300
Subject: Revert "PCI: imx6: Add support for active-low reset GPIO"
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

From: Fabio Estevam <fabio.estevam@nxp.com>

commit b2d7a9cd3ff8ec561348267c2ef7d47b2b91e801 upstream.

Commit 5c5fb40de8f1 ("PCI: imx6: Add support for active-low reset GPIO")
cause regressions on some boards like MX6 Gateworks Ventana, for example.

The reason for the breakage is that this commit sets the GPIO polarity in
the wrong logic level.

Also, the commit log is wrong because active-low reset GPIO is what the
driver used to support since the beginning.

So keep the old behavior that ignores the GPIO polarity specified in the
device tree and treat the PCI reset GPIO as active-low.

Reported-by: Krzysztof Hałasa <khalasa@piap.pl>
Tested-by: Tim Harvey <tharvey@gateworks.com>	# Gateworks Ventana
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/host/pci-imx6.c |   20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -32,7 +32,7 @@
 #define to_imx6_pcie(x)	container_of(x, struct imx6_pcie, pp)
 
 struct imx6_pcie {
-	struct gpio_desc	*reset_gpio;
+	int			reset_gpio;
 	struct clk		*pcie_bus;
 	struct clk		*pcie_phy;
 	struct clk		*pcie;
@@ -287,10 +287,10 @@ static int imx6_pcie_deassert_core_reset
 	usleep_range(200, 500);
 
 	/* Some boards don't have PCIe reset GPIO. */
-	if (imx6_pcie->reset_gpio) {
-		gpiod_set_value_cansleep(imx6_pcie->reset_gpio, 0);
+	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
+		gpio_set_value_cansleep(imx6_pcie->reset_gpio, 0);
 		msleep(100);
-		gpiod_set_value_cansleep(imx6_pcie->reset_gpio, 1);
+		gpio_set_value_cansleep(imx6_pcie->reset_gpio, 1);
 	}
 	return 0;
 
@@ -561,6 +561,7 @@ static int __init imx6_pcie_probe(struct
 {
 	struct imx6_pcie *imx6_pcie;
 	struct pcie_port *pp;
+	struct device_node *np = pdev->dev.of_node;
 	struct resource *dbi_base;
 	int ret;
 
@@ -581,8 +582,15 @@ static int __init imx6_pcie_probe(struct
 		return PTR_ERR(pp->dbi_base);
 
 	/* Fetch GPIOs */
-	imx6_pcie->reset_gpio = devm_gpiod_get_optional(&pdev->dev, "reset",
-							GPIOD_OUT_LOW);
+	imx6_pcie->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0);
+	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
+		ret = devm_gpio_request_one(&pdev->dev, imx6_pcie->reset_gpio,
+					    GPIOF_OUT_INIT_LOW, "PCIe reset");
+		if (ret) {
+			dev_err(&pdev->dev, "unable to get reset gpio\n");
+			return ret;
+		}
+	}
 
 	/* Fetch clocks */
 	imx6_pcie->pcie_phy = devm_clk_get(&pdev->dev, "pcie_phy");


Patches currently in stable-queue which might be from fabio.estevam@nxp.com are

queue-4.5/revert-pci-imx6-add-support-for-active-low-reset-gpio.patch