From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.linuxfoundation.org ([140.211.169.12]:60246 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752548AbcEAW5X (ORCPT ); Sun, 1 May 2016 18:57:23 -0400 Subject: Patch "Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delay" has been added to the 4.5-stable tree To: sboyd@codeaurora.org, bjorn.andersson@linaro.org, dmitry.torokhov@gmail.com, gregkh@linuxfoundation.org, john.stultz@linaro.org Cc: , From: Date: Sun, 01 May 2016 15:57:20 -0700 Message-ID: <146214344023016@kroah.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ANSI_X3.4-1968 Content-Transfer-Encoding: 8bit Sender: stable-owner@vger.kernel.org List-ID: This is a note to let you know that I've just added the patch titled Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delay to the 4.5-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: input-pmic8xxx-pwrkey-fix-algorithm-for-converting-trigger-delay.patch and it can be found in the queue-4.5 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let know about it. >>From eda5ecc0a6b865561997e177c393f0b0136fe3b7 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Sun, 17 Apr 2016 05:21:42 -0700 Subject: Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delay From: Stephen Boyd commit eda5ecc0a6b865561997e177c393f0b0136fe3b7 upstream. The trigger delay algorithm that converts from microseconds to the register value looks incorrect. According to most of the PMIC documentation, the equation is delay (Seconds) = (1 / 1024) * 2 ^ (x + 4) except for one case where the documentation looks to have a formatting issue and the equation looks like delay (Seconds) = (1 / 1024) * 2 x + 4 Most likely this driver was written with the improper documentation to begin with. According to the downstream sources the valid delays are from 2 seconds to 1/64 second, and the latter equation just doesn't make sense for that. Let's fix the algorithm and the range check to match the documentation and the downstream sources. Reported-by: Bjorn Andersson Fixes: 92d57a73e410 ("input: Add support for Qualcomm PMIC8XXX power key") Signed-off-by: Stephen Boyd Tested-by: John Stultz Acked-by: Bjorn Andersson Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/misc/pmic8xxx-pwrkey.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) --- a/drivers/input/misc/pmic8xxx-pwrkey.c +++ b/drivers/input/misc/pmic8xxx-pwrkey.c @@ -353,7 +353,8 @@ static int pmic8xxx_pwrkey_probe(struct if (of_property_read_u32(pdev->dev.of_node, "debounce", &kpd_delay)) kpd_delay = 15625; - if (kpd_delay > 62500 || kpd_delay == 0) { + /* Valid range of pwr key trigger delay is 1/64 sec to 2 seconds. */ + if (kpd_delay > USEC_PER_SEC * 2 || kpd_delay < USEC_PER_SEC / 64) { dev_err(&pdev->dev, "invalid power key trigger delay\n"); return -EINVAL; } @@ -385,8 +386,8 @@ static int pmic8xxx_pwrkey_probe(struct pwr->name = "pmic8xxx_pwrkey"; pwr->phys = "pmic8xxx_pwrkey/input0"; - delay = (kpd_delay << 10) / USEC_PER_SEC; - delay = 1 + ilog2(delay); + delay = (kpd_delay << 6) / USEC_PER_SEC; + delay = ilog2(delay); err = regmap_read(regmap, PON_CNTL_1, &pon_cntl); if (err < 0) { Patches currently in stable-queue which might be from sboyd@codeaurora.org are queue-4.5/input-pmic8xxx-pwrkey-fix-algorithm-for-converting-trigger-delay.patch