stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: richard@nod.at, gregkh@linuxfoundation.org, pfaehler@isse.de
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "ubi: Make recover_peb power cut aware" has been added to the 4.4-stable tree
Date: Sun, 24 Jul 2016 16:53:44 -0700	[thread overview]
Message-ID: <1469404424212249@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    ubi: Make recover_peb power cut aware

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     ubi-make-recover_peb-power-cut-aware.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 972228d87445dc46c0a01f5f3de673ac017626f7 Mon Sep 17 00:00:00 2001
From: Richard Weinberger <richard@nod.at>
Date: Tue, 21 Jun 2016 00:31:50 +0200
Subject: ubi: Make recover_peb power cut aware
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

From: Richard Weinberger <richard@nod.at>

commit 972228d87445dc46c0a01f5f3de673ac017626f7 upstream.

recover_peb() was never power cut aware,
if a power cut happened right after writing the VID header
upon next attach UBI would blindly use the new partial written
PEB and all data from the old PEB is lost.

In order to make recover_peb() power cut aware, write the new
VID with a proper crc and copy_flag set such that the UBI attach
process will detect whether the new PEB is completely written
or not.
We cannot directly use ubi_eba_atomic_leb_change() since we'd
have to unlock the LEB which is facing a write error.

Reported-by: Jörg Pfähler <pfaehler@isse.de>
Reviewed-by: Jörg Pfähler <pfaehler@isse.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/ubi/eba.c |   22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -575,6 +575,7 @@ static int recover_peb(struct ubi_device
 	int err, idx = vol_id2idx(ubi, vol_id), new_pnum, data_size, tries = 0;
 	struct ubi_volume *vol = ubi->volumes[idx];
 	struct ubi_vid_hdr *vid_hdr;
+	uint32_t crc;
 
 	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
 	if (!vid_hdr)
@@ -599,14 +600,8 @@ retry:
 		goto out_put;
 	}
 
-	vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
-	err = ubi_io_write_vid_hdr(ubi, new_pnum, vid_hdr);
-	if (err) {
-		up_read(&ubi->fm_eba_sem);
-		goto write_error;
-	}
+	ubi_assert(vid_hdr->vol_type == UBI_VID_DYNAMIC);
 
-	data_size = offset + len;
 	mutex_lock(&ubi->buf_mutex);
 	memset(ubi->peb_buf + offset, 0xFF, len);
 
@@ -621,6 +616,19 @@ retry:
 
 	memcpy(ubi->peb_buf + offset, buf, len);
 
+	data_size = offset + len;
+	crc = crc32(UBI_CRC32_INIT, ubi->peb_buf, data_size);
+	vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
+	vid_hdr->copy_flag = 1;
+	vid_hdr->data_size = cpu_to_be32(data_size);
+	vid_hdr->data_crc = cpu_to_be32(crc);
+	err = ubi_io_write_vid_hdr(ubi, new_pnum, vid_hdr);
+	if (err) {
+		mutex_unlock(&ubi->buf_mutex);
+		up_read(&ubi->fm_eba_sem);
+		goto write_error;
+	}
+
 	err = ubi_io_write_data(ubi, ubi->peb_buf, new_pnum, 0, data_size);
 	if (err) {
 		mutex_unlock(&ubi->buf_mutex);


Patches currently in stable-queue which might be from richard@nod.at are

queue-4.4/ubifs-implement-migratepage.patch
queue-4.4/ubi-make-recover_peb-power-cut-aware.patch
queue-4.4/mm-export-migrate_page_move_mapping-and-migrate_page_copy.patch

                 reply	other threads:[~2016-07-24 23:57 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1469404424212249@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=pfaehler@isse.de \
    --cc=richard@nod.at \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).