From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.linuxfoundation.org ([140.211.169.12]:60205 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1947146AbcHRK5a (ORCPT ); Thu, 18 Aug 2016 06:57:30 -0400 Subject: Patch "ARM: dts: realview: Fix PBX-A9 cache description" has been added to the 4.7-stable tree To: robin.murphy@arm.com, arnd@arndb.de, gregkh@linuxfoundation.org, linus.walleij@linaro.org, mark.rutland@arm.com Cc: , From: Date: Thu, 18 Aug 2016 12:57:32 +0200 Message-ID: <1471517852192123@kroah.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ANSI_X3.4-1968 Content-Transfer-Encoding: 8bit Sender: stable-owner@vger.kernel.org List-ID: This is a note to let you know that I've just added the patch titled ARM: dts: realview: Fix PBX-A9 cache description to the 4.7-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm-dts-realview-fix-pbx-a9-cache-description.patch and it can be found in the queue-4.7 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let know about it. >>From a20303725ec31ea0fcf498f1885b1d4245a4ee56 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Wed, 10 Aug 2016 14:02:17 +0200 Subject: ARM: dts: realview: Fix PBX-A9 cache description From: Robin Murphy commit a20303725ec31ea0fcf498f1885b1d4245a4ee56 upstream. Clearly QEMU is very permissive in how its PL310 model may be set up, but the real hardware turns out to be far more particular about things actually being correct. Fix up the DT description so that the real thing actually boots: - The arm,data-latency and arm,tag-latency properties need 3 cells to be valid, otherwise we end up retaining the default 8-cycle latencies which leads pretty quickly to lockup. - The arm,dirty-latency property is only relevant to L210/L220, so get rid of it. - The cache geometry override also leads to lockup and/or general misbehaviour. Irritatingly, the manual doesn't state the actual PL310 configuration, but based on the boardfile code and poking registers from the Boot Monitor, it would seem to be 8 sets of 16KB ways. With that, we can successfully boot to enjoy the fun of mismatched FPUs... Signed-off-by: Robin Murphy Tested-by: Mark Rutland Signed-off-by: Linus Walleij Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- arch/arm/boot/dts/arm-realview-pbx-a9.dts | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) --- a/arch/arm/boot/dts/arm-realview-pbx-a9.dts +++ b/arch/arm/boot/dts/arm-realview-pbx-a9.dts @@ -70,13 +70,12 @@ * associativity as these may be erroneously set * up by boot loader(s). */ - cache-size = <1048576>; // 1MB - cache-sets = <4096>; + cache-size = <131072>; // 128KB + cache-sets = <512>; cache-line-size = <32>; arm,parity-disable; - arm,tag-latency = <1>; - arm,data-latency = <1 1>; - arm,dirty-latency = <1>; + arm,tag-latency = <1 1 1>; + arm,data-latency = <1 1 1>; }; scu: scu@1f000000 { Patches currently in stable-queue which might be from robin.murphy@arm.com are queue-4.7/iommu-io-pgtable-arm-fix-iova_to_phys-for-block-entries.patch queue-4.7/arm-dts-realview-fix-pbx-a9-cache-description.patch