From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: patch "iio: adc: at91: unbreak channel adc channel 3" added to staging-linus To: anders@chargestorm.se, Stable@vger.kernel.org, alexandre.belloni@free-electrons.com, jic23@kernel.org From: Date: Tue, 23 Aug 2016 17:40:51 -0400 Message-ID: <1471988451160108@kroah.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ANSI_X3.4-1968 Content-Transfer-Encoding: 8bit Sender: stable-owner@vger.kernel.org List-ID: This is a note to let you know that I've just added the patch titled iio: adc: at91: unbreak channel adc channel 3 to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >>From c2ab447454d498e709d9011c0f2d2945ee321f9b Mon Sep 17 00:00:00 2001 From: Anders Darander Date: Mon, 8 Aug 2016 14:42:16 +0200 Subject: iio: adc: at91: unbreak channel adc channel 3 The driver always assumes that an input device has been created when reading channel 3. This causes a kernel panic when dereferencing st->ts_input. The change was introduced in commit 84882b060301 ("iio: adc: at91_adc: Add support for touchscreens without TSMR"). Earlier versions only entered that part of the if-else statement if only the following flags are set: AT91_ADC_IER_XRDY | AT91_ADC_IER_YRDY | AT91_ADC_IER_PRDY Signed-off-by: Anders Darander Acked-by: Alexandre Belloni Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/at91_adc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 52430ba171f3..0438c68015e8 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -381,8 +381,8 @@ static irqreturn_t at91_adc_rl_interrupt(int irq, void *private) st->ts_bufferedmeasure = false; input_report_key(st->ts_input, BTN_TOUCH, 0); input_sync(st->ts_input); - } else if (status & AT91_ADC_EOC(3)) { - /* Conversion finished */ + } else if (status & AT91_ADC_EOC(3) && st->ts_input) { + /* Conversion finished and we've a touchscreen */ if (st->ts_bufferedmeasure) { /* * Last measurement is always discarded, since it can -- 2.9.3