Patch "mmc: block: don't use CMD23 with very old MMC cards" has been added to the 4.7-stable tree

Patch "mmc: block: don't use CMD23 with very old MMC cards" has been added to the 4.7-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    mmc: block: don't use CMD23 with very old MMC cards

to the 4.7-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     mmc-block-don-t-use-cmd23-with-very-old-mmc-cards.patch
and it can be found in the queue-4.7 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 0ed50abb2d8fc81570b53af25621dad560cd49b3 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Daniel=20Gl=C3=B6ckner?= <dg@emlix.com>
Date: Tue, 30 Aug 2016 14:17:30 +0200
Subject: mmc: block: don't use CMD23 with very old MMC cards
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

From: Daniel Glöckner <dg@emlix.com>

commit 0ed50abb2d8fc81570b53af25621dad560cd49b3 upstream.

CMD23 aka SET_BLOCK_COUNT was introduced with MMC v3.1.
Older versions of the specification allowed to terminate
multi-block transfers only with CMD12.

The patch fixes the following problem:

  mmc0: new MMC card at address 0001
  mmcblk0: mmc0:0001 SDMB-16 15.3 MiB
  mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400900
  ...
  blk_update_request: I/O error, dev mmcblk0, sector 0
  Buffer I/O error on dev mmcblk0, logical block 0, async page read
   mmcblk0: unable to read partition table

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/card/block.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -2301,7 +2301,8 @@ again:
 	set_capacity(md->disk, size);
 
 	if (mmc_host_cmd23(card->host)) {
-		if (mmc_card_mmc(card) ||
+		if ((mmc_card_mmc(card) &&
+		     card->csd.mmca_vsn >= CSD_SPEC_VER_3) ||
 		    (mmc_card_sd(card) &&
 		     card->scr.cmds & SD_SCR_CMD23_SUPPORT))
 			md->flags |= MMC_BLK_CMD23;


Patches currently in stable-queue which might be from dg@emlix.com are

queue-4.7/mmc-block-don-t-use-cmd23-with-very-old-mmc-cards.patch