Patch "zfcp: fix fc_host port_type with NPIV" has been added to the 4.4-stable tree

Patch "zfcp: fix fc_host port_type with NPIV" has been added to the 4.4-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    zfcp: fix fc_host port_type with NPIV

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     zfcp-fix-fc_host-port_type-with-npiv.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From bd77befa5bcff8c51613de271913639edf85fbc2 Mon Sep 17 00:00:00 2001
From: Steffen Maier <maier@linux.vnet.ibm.com>
Date: Wed, 10 Aug 2016 18:30:44 +0200
Subject: zfcp: fix fc_host port_type with NPIV

From: Steffen Maier <maier@linux.vnet.ibm.com>

commit bd77befa5bcff8c51613de271913639edf85fbc2 upstream.

For an NPIV-enabled FCP device, zfcp can erroneously show
"NPort (fabric via point-to-point)" instead of "NPIV VPORT"
for the port_type sysfs attribute of the corresponding
fc_host.
s390-tools that can be affected are dbginfo.sh and ziomon.

zfcp_fsf_exchange_config_evaluate() ignores
fsf_qtcb_bottom_config.connection_features indicating NPIV
and only sets fc_host_port_type to FC_PORTTYPE_NPORT if
fsf_qtcb_bottom_config.fc_topology is FSF_TOPO_FABRIC.

Only the independent zfcp_fsf_exchange_port_evaluate()
evaluates connection_features to overwrite fc_host_port_type
to FC_PORTTYPE_NPIV in case of NPIV.
Code was introduced with upstream kernel 2.6.30
commit 0282985da5923fa6365adcc1a1586ae0c13c1617
("[SCSI] zfcp: Report fc_host_port_type as NPIV").

This works during FCP device recovery (such as set online)
because it performs FSF_QTCB_EXCHANGE_CONFIG_DATA followed by
FSF_QTCB_EXCHANGE_PORT_DATA in sequence.

However, the zfcp-specific scsi host sysfs attributes
"requests", "megabytes", or "seconds_active" trigger only
zfcp_fsf_exchange_config_evaluate() resetting fc_host
port_type to FC_PORTTYPE_NPORT despite NPIV.

The zfcp-specific scsi host sysfs attribute "utilization"
triggers only zfcp_fsf_exchange_port_evaluate() correcting
the fc_host port_type again in case of NPIV.

Evaluate fsf_qtcb_bottom_config.connection_features
in zfcp_fsf_exchange_config_evaluate() where it belongs to.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: 0282985da592 ("[SCSI] zfcp: Report fc_host_port_type as NPIV")
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/scsi/zfcp_fsf.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -3,7 +3,7 @@
  *
  * Implementation of FSF commands.
  *
- * Copyright IBM Corp. 2002, 2013
+ * Copyright IBM Corp. 2002, 2015
  */
 
 #define KMSG_COMPONENT "zfcp"
@@ -508,7 +508,10 @@ static int zfcp_fsf_exchange_config_eval
 		fc_host_port_type(shost) = FC_PORTTYPE_PTP;
 		break;
 	case FSF_TOPO_FABRIC:
-		fc_host_port_type(shost) = FC_PORTTYPE_NPORT;
+		if (bottom->connection_features & FSF_FEATURE_NPIV_MODE)
+			fc_host_port_type(shost) = FC_PORTTYPE_NPIV;
+		else
+			fc_host_port_type(shost) = FC_PORTTYPE_NPORT;
 		break;
 	case FSF_TOPO_AL:
 		fc_host_port_type(shost) = FC_PORTTYPE_NLPORT;
@@ -613,7 +616,6 @@ static void zfcp_fsf_exchange_port_evalu
 
 	if (adapter->connection_features & FSF_FEATURE_NPIV_MODE) {
 		fc_host_permanent_port_name(shost) = bottom->wwpn;
-		fc_host_port_type(shost) = FC_PORTTYPE_NPIV;
 	} else
 		fc_host_permanent_port_name(shost) = fc_host_port_name(shost);
 	fc_host_maxframe_size(shost) = bottom->maximum_frame_size;


Patches currently in stable-queue which might be from maier@linux.vnet.ibm.com are

queue-4.4/zfcp-fix-els-gs-request-response-length-for-hardware-data-router.patch
queue-4.4/zfcp-trace-on-request-for-open-and-close-of-wka-port.patch
queue-4.4/zfcp-close-window-with-unblocked-rport-during-rport-gone.patch
queue-4.4/zfcp-retain-trace-level-for-scsi-and-hba-fsf-response-records.patch
queue-4.4/zfcp-restore-dont-use-0-to-indicate-invalid-lun-in-rec-trace.patch
queue-4.4/zfcp-fix-fc_host-port_type-with-npiv.patch
queue-4.4/zfcp-fix-d_id-field-with-actual-value-on-tracing-san-responses.patch
queue-4.4/zfcp-fix-payload-trace-length-for-san-request-response.patch
queue-4.4/scsi-zfcp-spin_lock_irqsave-is-not-nestable.patch
queue-4.4/zfcp-restore-tracing-of-handle-for-port-and-lun-with-hba-records.patch
queue-4.4/zfcp-trace-full-payload-of-all-san-records-req-resp-iels.patch