From: <gregkh@linuxfoundation.org>
To: cpaul@redhat.com, daniel.vetter@ffwll.ch,
maarten.lankhorst@linux.intel.com, matthew.d.roper@intel.com,
ville.syrjala@linux.intel.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] drm/i915/gen6+: Interpret mailbox error flags" failed to apply to 4.8-stable tree
Date: Fri, 28 Oct 2016 10:43:55 -0400 [thread overview]
Message-ID: <1477665835191107@kroah.com> (raw)
The patch below does not apply to the 4.8-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 87660502f1a4d51fb043e89a45d30c9917787c22 Mon Sep 17 00:00:00 2001
From: Lyude <cpaul@redhat.com>
Date: Wed, 17 Aug 2016 15:55:53 -0400
Subject: [PATCH] drm/i915/gen6+: Interpret mailbox error flags
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
In order to add proper support for the SAGV, we need to be able to know
what the cause of a failure to change the SAGV through the pcode mailbox
was. The reasoning for this is that some very early pre-release Skylake
machines don't actually allow you to control the SAGV on them, and
indicate an invalid mailbox command was sent.
This also might come in handy in the future for debugging.
Changes since v1:
- Add functions for interpreting gen6 mailbox error codes along with
gen7+ error codes, and actually interpret those codes properly
- Renamed patch to reflect new behavior
Signed-off-by: Lyude <cpaul@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-2-git-send-email-cpaul@redhat.com
[mlankhorst: -ENOSYS -> -ENXIO for checkpatch]
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index d4adf2806c50..7419fbfb145e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7123,6 +7123,15 @@ enum {
#define GEN6_PCODE_MAILBOX _MMIO(0x138124)
#define GEN6_PCODE_READY (1<<31)
+#define GEN6_PCODE_ERROR_MASK 0xFF
+#define GEN6_PCODE_SUCCESS 0x0
+#define GEN6_PCODE_ILLEGAL_CMD 0x1
+#define GEN6_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE 0x2
+#define GEN6_PCODE_TIMEOUT 0x3
+#define GEN6_PCODE_UNIMPLEMENTED_CMD 0xFF
+#define GEN7_PCODE_TIMEOUT 0x2
+#define GEN7_PCODE_ILLEGAL_DATA 0x3
+#define GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE 0x10
#define GEN6_PCODE_WRITE_RC6VIDS 0x4
#define GEN6_PCODE_READ_RC6VIDS 0x5
#define GEN6_ENCODE_RC6_VID(mv) (((mv) - 245) / 5)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 8a6751e14ab9..d0b745534585 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -7659,8 +7659,53 @@ void intel_init_pm(struct drm_device *dev)
}
}
+static inline int gen6_check_mailbox_status(struct drm_i915_private *dev_priv)
+{
+ uint32_t flags =
+ I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_ERROR_MASK;
+
+ switch (flags) {
+ case GEN6_PCODE_SUCCESS:
+ return 0;
+ case GEN6_PCODE_UNIMPLEMENTED_CMD:
+ case GEN6_PCODE_ILLEGAL_CMD:
+ return -ENXIO;
+ case GEN6_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
+ return -EOVERFLOW;
+ case GEN6_PCODE_TIMEOUT:
+ return -ETIMEDOUT;
+ default:
+ MISSING_CASE(flags)
+ return 0;
+ }
+}
+
+static inline int gen7_check_mailbox_status(struct drm_i915_private *dev_priv)
+{
+ uint32_t flags =
+ I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_ERROR_MASK;
+
+ switch (flags) {
+ case GEN6_PCODE_SUCCESS:
+ return 0;
+ case GEN6_PCODE_ILLEGAL_CMD:
+ return -ENXIO;
+ case GEN7_PCODE_TIMEOUT:
+ return -ETIMEDOUT;
+ case GEN7_PCODE_ILLEGAL_DATA:
+ return -EINVAL;
+ case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
+ return -EOVERFLOW;
+ default:
+ MISSING_CASE(flags);
+ return 0;
+ }
+}
+
int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val)
{
+ int status;
+
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
/* GEN6_PCODE_* are outside of the forcewake domain, we can
@@ -7687,12 +7732,25 @@ int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val
*val = I915_READ_FW(GEN6_PCODE_DATA);
I915_WRITE_FW(GEN6_PCODE_DATA, 0);
+ if (INTEL_GEN(dev_priv) > 6)
+ status = gen7_check_mailbox_status(dev_priv);
+ else
+ status = gen6_check_mailbox_status(dev_priv);
+
+ if (status) {
+ DRM_DEBUG_DRIVER("warning: pcode (read) mailbox access failed: %d\n",
+ status);
+ return status;
+ }
+
return 0;
}
int sandybridge_pcode_write(struct drm_i915_private *dev_priv,
- u32 mbox, u32 val)
+ u32 mbox, u32 val)
{
+ int status;
+
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
/* GEN6_PCODE_* are outside of the forcewake domain, we can
@@ -7717,6 +7775,17 @@ int sandybridge_pcode_write(struct drm_i915_private *dev_priv,
I915_WRITE_FW(GEN6_PCODE_DATA, 0);
+ if (INTEL_GEN(dev_priv) > 6)
+ status = gen7_check_mailbox_status(dev_priv);
+ else
+ status = gen6_check_mailbox_status(dev_priv);
+
+ if (status) {
+ DRM_DEBUG_DRIVER("warning: pcode (write) mailbox access failed: %d\n",
+ status);
+ return status;
+ }
+
return 0;
}
reply other threads:[~2016-10-28 14:43 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477665835191107@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=cpaul@redhat.com \
--cc=daniel.vetter@ffwll.ch \
--cc=maarten.lankhorst@linux.intel.com \
--cc=matthew.d.roper@intel.com \
--cc=stable@vger.kernel.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).