From: <gregkh@linuxfoundation.org>
To: tiwai@suse.de, gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "ALSA: hda - Merge RIRB_PRE_DELAY into CTX_WORKAROUND caps" has been added to the 4.4-stable tree
Date: Mon, 07 Nov 2016 17:18:23 +0100 [thread overview]
Message-ID: <1478535503204186@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
ALSA: hda - Merge RIRB_PRE_DELAY into CTX_WORKAROUND caps
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
alsa-hda-merge-rirb_pre_delay-into-ctx_workaround-caps.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From ef85f299c74e6c5dd98ec0230183be33f4c2813d Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 17 Dec 2015 08:12:37 +0100
Subject: ALSA: hda - Merge RIRB_PRE_DELAY into CTX_WORKAROUND caps
From: Takashi Iwai <tiwai@suse.de>
commit ef85f299c74e6c5dd98ec0230183be33f4c2813d upstream.
AZX_DCAPS_RIRB_PRE_DELAY is always tied with AZX_DCAPS_CTX_WORKAROUND,
which is Creative's XFi specific. So, we can replace it and reduce
one more bit free for DCAPS.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/hda_controller.c | 2 +-
sound/pci/hda/hda_controller.h | 2 +-
sound/pci/hda/hda_intel.c | 6 ++----
3 files changed, 4 insertions(+), 6 deletions(-)
--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -956,7 +956,7 @@ irqreturn_t azx_interrupt(int irq, void
status = azx_readb(chip, RIRBSTS);
if (status & RIRB_INT_MASK) {
if (status & RIRB_INT_RESPONSE) {
- if (chip->driver_caps & AZX_DCAPS_RIRB_PRE_DELAY)
+ if (chip->driver_caps & AZX_DCAPS_CTX_WORKAROUND)
udelay(80);
snd_hdac_bus_update_rirb(bus);
}
--- a/sound/pci/hda/hda_controller.h
+++ b/sound/pci/hda/hda_controller.h
@@ -33,7 +33,7 @@
#define AZX_DCAPS_SNOOP_MASK (3 << 10) /* snoop type mask */
#define AZX_DCAPS_SNOOP_OFF (1 << 12) /* snoop default off */
#define AZX_DCAPS_RIRB_DELAY (1 << 13) /* Long delay in read loop */
-#define AZX_DCAPS_RIRB_PRE_DELAY (1 << 14) /* Put a delay before read */
+/* 14 unused */
#define AZX_DCAPS_CTX_WORKAROUND (1 << 15) /* X-Fi workaround */
#define AZX_DCAPS_POSFIX_LPIB (1 << 16) /* Use LPIB as default */
#define AZX_DCAPS_POSFIX_VIA (1 << 17) /* Use VIACOMBO as default */
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2406,14 +2406,12 @@ static const struct pci_device_id azx_id
.class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
.class_mask = 0xffffff,
.driver_data = AZX_DRIVER_CTX | AZX_DCAPS_CTX_WORKAROUND |
- AZX_DCAPS_NO_64BIT |
- AZX_DCAPS_RIRB_PRE_DELAY | AZX_DCAPS_POSFIX_LPIB },
+ AZX_DCAPS_NO_64BIT | AZX_DCAPS_POSFIX_LPIB },
#else
/* this entry seems still valid -- i.e. without emu20kx chip */
{ PCI_DEVICE(0x1102, 0x0009),
.driver_data = AZX_DRIVER_CTX | AZX_DCAPS_CTX_WORKAROUND |
- AZX_DCAPS_NO_64BIT |
- AZX_DCAPS_RIRB_PRE_DELAY | AZX_DCAPS_POSFIX_LPIB },
+ AZX_DCAPS_NO_64BIT | AZX_DCAPS_POSFIX_LPIB },
#endif
/* CM8888 */
{ PCI_DEVICE(0x13f6, 0x5011),
Patches currently in stable-queue which might be from tiwai@suse.de are
queue-4.4/alsa-hda-adding-a-new-group-of-pin-cfg-into-alc295-pin-quirk-table.patch
queue-4.4/alsa-hda-fix-headset-mic-detection-problem-for-two-dell-laptops.patch
queue-4.4/alsa-hda-merge-rirb_pre_delay-into-ctx_workaround-caps.patch
queue-4.4/alsa-hda-allow-40-bit-dma-mask-for-nvidia-devices.patch
queue-4.4/alsa-hda-raise-azx_dcaps_rirb_delay-handling-into-top-drivers.patch
queue-4.4/alsa-usb-audio-add-quirk-for-syntek-stk1160.patch
reply other threads:[~2016-11-07 16:18 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1478535503204186@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).