From: <gregkh@linuxfoundation.org>
To: mhocko@suse.com, akpm@linux-foundation.org, ddstreet@ieee.org,
gregkh@linuxfoundation.org, tglx@linutronix.de,
yuzhao@google.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "hotplug: Make register and unregister notifier API symmetric" has been added to the 4.8-stable tree
Date: Tue, 13 Dec 2016 07:25:26 -0800 [thread overview]
Message-ID: <1481642726116119@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
hotplug: Make register and unregister notifier API symmetric
to the 4.8-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
hotplug-make-register-and-unregister-notifier-api-symmetric.patch
and it can be found in the queue-4.8 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 777c6e0daebb3fcefbbd6f620410a946b07ef6d0 Mon Sep 17 00:00:00 2001
From: Michal Hocko <mhocko@suse.com>
Date: Wed, 7 Dec 2016 14:54:38 +0100
Subject: hotplug: Make register and unregister notifier API symmetric
From: Michal Hocko <mhocko@suse.com>
commit 777c6e0daebb3fcefbbd6f620410a946b07ef6d0 upstream.
Yu Zhao has noticed that __unregister_cpu_notifier only unregisters its
notifiers when HOTPLUG_CPU=y while the registration might succeed even
when HOTPLUG_CPU=n if MODULE is enabled. This means that e.g. zswap
might keep a stale notifier on the list on the manual clean up during
the pool tear down and thus corrupt the list. Resulting in the following
[ 144.964346] BUG: unable to handle kernel paging request at ffff880658a2be78
[ 144.971337] IP: [<ffffffffa290b00b>] raw_notifier_chain_register+0x1b/0x40
<snipped>
[ 145.122628] Call Trace:
[ 145.125086] [<ffffffffa28e5cf8>] __register_cpu_notifier+0x18/0x20
[ 145.131350] [<ffffffffa2a5dd73>] zswap_pool_create+0x273/0x400
[ 145.137268] [<ffffffffa2a5e0fc>] __zswap_param_set+0x1fc/0x300
[ 145.143188] [<ffffffffa2944c1d>] ? trace_hardirqs_on+0xd/0x10
[ 145.149018] [<ffffffffa2908798>] ? kernel_param_lock+0x28/0x30
[ 145.154940] [<ffffffffa2a3e8cf>] ? __might_fault+0x4f/0xa0
[ 145.160511] [<ffffffffa2a5e237>] zswap_compressor_param_set+0x17/0x20
[ 145.167035] [<ffffffffa2908d3c>] param_attr_store+0x5c/0xb0
[ 145.172694] [<ffffffffa290848d>] module_attr_store+0x1d/0x30
[ 145.178443] [<ffffffffa2b2b41f>] sysfs_kf_write+0x4f/0x70
[ 145.183925] [<ffffffffa2b2a5b9>] kernfs_fop_write+0x149/0x180
[ 145.189761] [<ffffffffa2a99248>] __vfs_write+0x18/0x40
[ 145.194982] [<ffffffffa2a9a412>] vfs_write+0xb2/0x1a0
[ 145.200122] [<ffffffffa2a9a732>] SyS_write+0x52/0xa0
[ 145.205177] [<ffffffffa2ff4d97>] entry_SYSCALL_64_fastpath+0x12/0x17
This can be even triggered manually by changing
/sys/module/zswap/parameters/compressor multiple times.
Fix this issue by making unregister APIs symmetric to the register so
there are no surprises.
Fixes: 47e627bc8c9a ("[PATCH] hotplug: Allow modules to use the cpu hotplug notifiers even if !CONFIG_HOTPLUG_CPU")
Reported-and-tested-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Link: http://lkml.kernel.org/r/20161207135438.4310-1-mhocko@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/cpu.h | 15 ++++-----------
kernel/cpu.c | 2 +-
2 files changed, 5 insertions(+), 12 deletions(-)
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -105,22 +105,16 @@ extern bool cpuhp_tasks_frozen;
{ .notifier_call = fn, .priority = pri }; \
__register_cpu_notifier(&fn##_nb); \
}
-#else /* #if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE) */
-#define cpu_notifier(fn, pri) do { (void)(fn); } while (0)
-#define __cpu_notifier(fn, pri) do { (void)(fn); } while (0)
-#endif /* #else #if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE) */
-#ifdef CONFIG_HOTPLUG_CPU
extern int register_cpu_notifier(struct notifier_block *nb);
extern int __register_cpu_notifier(struct notifier_block *nb);
extern void unregister_cpu_notifier(struct notifier_block *nb);
extern void __unregister_cpu_notifier(struct notifier_block *nb);
-#else
-#ifndef MODULE
-extern int register_cpu_notifier(struct notifier_block *nb);
-extern int __register_cpu_notifier(struct notifier_block *nb);
-#else
+#else /* #if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE) */
+#define cpu_notifier(fn, pri) do { (void)(fn); } while (0)
+#define __cpu_notifier(fn, pri) do { (void)(fn); } while (0)
+
static inline int register_cpu_notifier(struct notifier_block *nb)
{
return 0;
@@ -130,7 +124,6 @@ static inline int __register_cpu_notifie
{
return 0;
}
-#endif
static inline void unregister_cpu_notifier(struct notifier_block *nb)
{
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -578,7 +578,6 @@ void __init cpuhp_threads_init(void)
kthread_unpark(this_cpu_read(cpuhp_state.thread));
}
-#ifdef CONFIG_HOTPLUG_CPU
EXPORT_SYMBOL(register_cpu_notifier);
EXPORT_SYMBOL(__register_cpu_notifier);
void unregister_cpu_notifier(struct notifier_block *nb)
@@ -595,6 +594,7 @@ void __unregister_cpu_notifier(struct no
}
EXPORT_SYMBOL(__unregister_cpu_notifier);
+#ifdef CONFIG_HOTPLUG_CPU
/**
* clear_tasks_mm_cpumask - Safely clear tasks' mm_cpumask for a CPU
* @cpu: a CPU id
Patches currently in stable-queue which might be from mhocko@suse.com are
queue-4.8/hotplug-make-register-and-unregister-notifier-api-symmetric.patch
reply other threads:[~2016-12-13 15:31 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1481642726116119@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=ddstreet@ieee.org \
--cc=mhocko@suse.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=yuzhao@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).