[PATCH 1/1] usb: xhci: hold lock over xhci_abort_cmd_ring()

[Lu Baolu <baolu.lu@linux.intel.com>]

In command timer function, xhci_handle_command_timeout(), xhci->lock
is unlocked before call into xhci_abort_cmd_ring(). This might cause
race between the timer function and the event handler.

The xhci_abort_cmd_ring() function sets the CMD_RING_ABORT bit in the
command register and polling it until the setting takes effect. A stop
command ring event might be handled between writing the abort bit and
polling for it. The event handler will restart the command ring, which
causes the failure of polling, and we ever believed that we failed to
stop it.

As a bonus, this also fixes some issues of calling functions without
locking in xhci_handle_command_timeout().

Cc: <stable@vger.kernel.org> # 3.7+
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
 drivers/usb/host/xhci-ring.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 797137e..0f99078 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1283,29 +1283,34 @@ void xhci_handle_command_timeout(unsigned long data)
 	hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
 	if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
 	    (hw_ring_state & CMD_RING_RUNNING))  {
-		spin_unlock_irqrestore(&xhci->lock, flags);
 		xhci_dbg(xhci, "Command timeout\n");
 		ret = xhci_abort_cmd_ring(xhci);
 		if (unlikely(ret == -ESHUTDOWN)) {
 			xhci_err(xhci, "Abort command ring failed\n");
 			xhci_cleanup_command_queue(xhci);
+			spin_unlock_irqrestore(&xhci->lock, flags);
 			usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
 			xhci_dbg(xhci, "xHCI host controller is dead.\n");
+
+			return;
 		}
-		return;
+
+		goto time_out_completed;
 	}
 
 	/* command ring failed to restart, or host removed. Bail out */
 	if (second_timeout || xhci->xhc_state & XHCI_STATE_REMOVING) {
-		spin_unlock_irqrestore(&xhci->lock, flags);
 		xhci_dbg(xhci, "command timed out twice, ring start fail?\n");
 		xhci_cleanup_command_queue(xhci);
-		return;
+
+		goto time_out_completed;
 	}
 
 	/* command timeout on stopped ring, ring can't be aborted */
 	xhci_dbg(xhci, "Command timeout on stopped ring\n");
 	xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd);
+
+time_out_completed:
 	spin_unlock_irqrestore(&xhci->lock, flags);
 	return;
 }
-- 
2.1.4