Patch "arm64: tegra: Add VDD_GPU regulator to Jetson TX1" has been added to the 4.8-stable tree

Patch "arm64: tegra: Add VDD_GPU regulator to Jetson TX1" has been added to the 4.8-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    arm64: tegra: Add VDD_GPU regulator to Jetson TX1

to the 4.8-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm64-tegra-add-vdd_gpu-regulator-to-jetson-tx1.patch
and it can be found in the queue-4.8 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 5e6b9a89afceadb1ee45472098f7d20af260335c Mon Sep 17 00:00:00 2001
From: Alexandre Courbot <acourbot@nvidia.com>
Date: Fri, 2 Dec 2016 20:57:55 +0100
Subject: arm64: tegra: Add VDD_GPU regulator to Jetson TX1

From: Alexandre Courbot <acourbot@nvidia.com>

commit 5e6b9a89afceadb1ee45472098f7d20af260335c upstream.

Add the VDD_GPU regulator (a GPIO-enabled PWM regulator) to the Jetson
TX1 board. This addition allows the GPU to be used provided the
bootloader properly enabled the GPU node.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
[as pointed out by Thierry on IRC, nobody has reported a bug
 in the field, but using a new bootloader with a .dtb that
 has the incorrect data, it will crash on boot]
Fixes: 336f79c7b6d7 ("arm64: tegra: Add NVIDIA Jetson TX1 Developer Kit support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -21,6 +21,10 @@
 		reg = <0x0 0x80000000 0x1 0x0>;
 	};
 
+	gpu@57000000 {
+		vdd-supply = <&vdd_gpu>;
+	};
+
 	/* debug port */
 	serial@70006000 {
 		status = "okay";
@@ -291,4 +295,18 @@
 			clock-frequency = <32768>;
 		};
 	};
+
+	regulators {
+		vdd_gpu: regulator@100 {
+			compatible = "pwm-regulator";
+			reg = <100>;
+			pwms = <&pwm 1 4880>;
+			regulator-name = "VDD_GPU";
+			regulator-min-microvolt = <710000>;
+			regulator-max-microvolt = <1320000>;
+			enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
+			regulator-ramp-delay = <80>;
+			regulator-enable-ramp-delay = <1000>;
+		};
+	};
 };


Patches currently in stable-queue which might be from acourbot@nvidia.com are

queue-4.8/arm64-tegra-add-vdd_gpu-regulator-to-jetson-tx1.patch