Patch "drm/nouveau/i2c/gk110b,gm10x: use the correct implementation" has been added to the 4.8-stable tree

Patch "drm/nouveau/i2c/gk110b,gm10x: use the correct implementation" has been added to the 4.8-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    drm/nouveau/i2c/gk110b,gm10x: use the correct implementation

to the 4.8-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     drm-nouveau-i2c-gk110b-gm10x-use-the-correct-implementation.patch
and it can be found in the queue-4.8 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 5b3800a6b763874e4a23702fb9628d3bd3315ce9 Mon Sep 17 00:00:00 2001
From: Ben Skeggs <bskeggs@redhat.com>
Date: Thu, 3 Nov 2016 16:37:33 +1000
Subject: drm/nouveau/i2c/gk110b,gm10x: use the correct implementation

From: Ben Skeggs <bskeggs@redhat.com>

commit 5b3800a6b763874e4a23702fb9628d3bd3315ce9 upstream.

DPAUX registers moved on Kepler, these chipsets were still using the
Fermi implementation for some reason.

This fixes detection of hotplug/sink IRQs on DP connectors.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/nouveau/nvkm/engine/device/base.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c
@@ -1851,7 +1851,7 @@ nvf1_chipset = {
 	.fb = gk104_fb_new,
 	.fuse = gf100_fuse_new,
 	.gpio = gk104_gpio_new,
-	.i2c = gf119_i2c_new,
+	.i2c = gk104_i2c_new,
 	.ibus = gk104_ibus_new,
 	.iccsense = gf100_iccsense_new,
 	.imem = nv50_instmem_new,
@@ -1965,7 +1965,7 @@ nv117_chipset = {
 	.fb = gm107_fb_new,
 	.fuse = gm107_fuse_new,
 	.gpio = gk104_gpio_new,
-	.i2c = gf119_i2c_new,
+	.i2c = gk104_i2c_new,
 	.ibus = gk104_ibus_new,
 	.iccsense = gf100_iccsense_new,
 	.imem = nv50_instmem_new,
@@ -1999,7 +1999,7 @@ nv118_chipset = {
 	.fb = gm107_fb_new,
 	.fuse = gm107_fuse_new,
 	.gpio = gk104_gpio_new,
-	.i2c = gf119_i2c_new,
+	.i2c = gk104_i2c_new,
 	.ibus = gk104_ibus_new,
 	.iccsense = gf100_iccsense_new,
 	.imem = nv50_instmem_new,


Patches currently in stable-queue which might be from bskeggs@redhat.com are

queue-4.8/drm-nouveau-ttm-wait-for-bo-fence-to-signal-before-unmapping-vmas.patch
queue-4.8/drm-nouveau-bios-require-checksum-to-match-for-fast-acpi-shadow-method.patch
queue-4.8/drm-nouveau-gr-fallback-to-legacy-paths-during-firmware-lookup.patch
queue-4.8/drm-nouveau-kms-lvds-panel-strap-moved-again-on-maxwell.patch
queue-4.8/drm-nouveau-ltc-protect-clearing-of-comptags-with-mutex.patch
queue-4.8/drm-nouveau-fifo-gf100-protect-channel-preempt-with-subdev-mutex.patch
queue-4.8/drm-nouveau-i2c-gk110b-gm10x-use-the-correct-implementation.patch