Patch "scsi: megaraid_sas: For SRIOV enabled firmware, ensure VF driver waits for 30secs before reset" has been added to the 4.4-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    scsi: megaraid_sas: For SRIOV enabled firmware, ensure VF driver waits for 30secs before reset

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     scsi-megaraid_sas-for-sriov-enabled-firmware-ensure-vf-driver-waits-for-30secs-before-reset.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 18e1c7f68a5814442abad849abe6eacbf02ffd7c Mon Sep 17 00:00:00 2001
From: Kashyap Desai <kashyap.desai@broadcom.com>
Date: Fri, 21 Oct 2016 06:33:29 -0700
Subject: scsi: megaraid_sas: For SRIOV enabled firmware, ensure VF driver waits for 30secs before reset

From: Kashyap Desai <kashyap.desai@broadcom.com>

commit 18e1c7f68a5814442abad849abe6eacbf02ffd7c upstream.

For SRIOV enabled firmware, if there is a OCR(online controller reset)
possibility driver set the convert flag to 1, which is not happening if
there are outstanding commands even after 180 seconds.  As driver does
not set convert flag to 1 and still making the OCR to run, VF(Virtual
function) driver is directly writing on to the register instead of
waiting for 30 seconds. Setting convert flag to 1 will cause VF driver
will wait for 30 secs before going for reset.

Signed-off-by: Kiran Kumar Kasturi <kiran-kumar.kasturi@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/megaraid/megaraid_sas_fusion.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -2648,6 +2648,7 @@ int megasas_wait_for_outstanding_fusion(
 		dev_err(&instance->pdev->dev, "pending commands remain after waiting, "
 		       "will reset adapter scsi%d.\n",
 		       instance->host->host_no);
+		*convert = 1;
 		retval = 1;
 	}
 out:


Patches currently in stable-queue which might be from kashyap.desai@broadcom.com are

queue-4.4/scsi-megaraid_sas-do-not-set-mpi2_type_cuda-for-jbod-fp-path-for-fw-which-does-not-support-jbod-sequence-map.patch
queue-4.4/scsi-megaraid_sas-for-sriov-enabled-firmware-ensure-vf-driver-waits-for-30secs-before-reset.patch