From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.linuxfoundation.org ([140.211.169.12]:42636 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759369AbdAILOh (ORCPT ); Mon, 9 Jan 2017 06:14:37 -0500 Subject: Patch "ARM: dts: sun7i: bananapi-m1-plus: Enable USB PHY for USB host support" has been added to the 4.9-stable tree To: wens@csie.org, gregkh@linuxfoundation.org, maxime.ripard@free-electrons.com Cc: , From: Date: Mon, 09 Jan 2017 12:14:53 +0100 Message-ID: <1483960493219186@kroah.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ANSI_X3.4-1968 Content-Transfer-Encoding: 8bit Sender: stable-owner@vger.kernel.org List-ID: This is a note to let you know that I've just added the patch titled ARM: dts: sun7i: bananapi-m1-plus: Enable USB PHY for USB host support to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm-dts-sun7i-bananapi-m1-plus-enable-usb-phy-for-usb-host-support.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let know about it. >>From 0cff18cbab4f55581d9da86e4286655d9723d7d2 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 15 Nov 2016 21:51:04 +0800 Subject: ARM: dts: sun7i: bananapi-m1-plus: Enable USB PHY for USB host support From: Chen-Yu Tsai commit 0cff18cbab4f55581d9da86e4286655d9723d7d2 upstream. The 2 USB host ports are directly tied to the 2 USB hosts in the SoC. The 2 host pairs were already enabled, but the USB PHY wasn't. VBUS on the 2 ports are always on. Enable the USB PHY. Fixes: 04c85ecad32a ("ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Signed-off-by: Greg Kroah-Hartman --- arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 5 +++++ 1 file changed, 5 insertions(+) --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -227,3 +227,8 @@ pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + +&usbphy { + /* VBUS on usb host ports are tied to DC5V and therefore always on */ + status = "okay"; +}; Patches currently in stable-queue which might be from wens@csie.org are queue-4.9/arm-dts-sun7i-bananapi-m1-plus-enable-usb-phy-for-usb-host-support.patch