From: <gregkh@linuxfoundation.org>
To: johannes.berg@intel.com, emmanuel.grumbach@intel.com,
gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "mac80211: fix tid_agg_rx NULL dereference" has been added to the 4.9-stable tree
Date: Mon, 09 Jan 2017 13:07:27 +0100 [thread overview]
Message-ID: <148396364711229@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
mac80211: fix tid_agg_rx NULL dereference
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mac80211-fix-tid_agg_rx-null-dereference.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 1c3d185a9a0b136a58e73b02912d593d0303d1da Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 18 Oct 2016 23:12:08 +0300
Subject: mac80211: fix tid_agg_rx NULL dereference
From: Johannes Berg <johannes.berg@intel.com>
commit 1c3d185a9a0b136a58e73b02912d593d0303d1da upstream.
On drivers setting the SUPPORTS_REORDERING_BUFFER hardware flag,
we crash when the peer sends an AddBA request while we already
have a session open on the seame TID; this is because on those
drivers, the tid_agg_rx is left NULL even though the session is
valid, and the agg_session_valid bit is set.
To fix this, store the dialog tokens outside the tid_agg_rx to
be able to compare them to the received AddBA request.
Fixes: f89e07d4cf26 ("mac80211: agg-rx: refuse ADDBA Request with timeout update")
Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/mac80211/agg-rx.c | 8 ++------
net/mac80211/debugfs_sta.c | 2 +-
net/mac80211/sta_info.h | 4 ++--
3 files changed, 5 insertions(+), 9 deletions(-)
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -315,11 +315,7 @@ void __ieee80211_start_rx_ba_session(str
mutex_lock(&sta->ampdu_mlme.mtx);
if (test_bit(tid, sta->ampdu_mlme.agg_session_valid)) {
- tid_agg_rx = rcu_dereference_protected(
- sta->ampdu_mlme.tid_rx[tid],
- lockdep_is_held(&sta->ampdu_mlme.mtx));
-
- if (tid_agg_rx->dialog_token == dialog_token) {
+ if (sta->ampdu_mlme.tid_rx_token[tid] == dialog_token) {
ht_dbg_ratelimited(sta->sdata,
"updated AddBA Req from %pM on tid %u\n",
sta->sta.addr, tid);
@@ -396,7 +392,6 @@ void __ieee80211_start_rx_ba_session(str
}
/* update data */
- tid_agg_rx->dialog_token = dialog_token;
tid_agg_rx->ssn = start_seq_num;
tid_agg_rx->head_seq_num = start_seq_num;
tid_agg_rx->buf_size = buf_size;
@@ -418,6 +413,7 @@ end:
if (status == WLAN_STATUS_SUCCESS) {
__set_bit(tid, sta->ampdu_mlme.agg_session_valid);
__clear_bit(tid, sta->ampdu_mlme.unexpected_agg);
+ sta->ampdu_mlme.tid_rx_token[tid] = dialog_token;
}
mutex_unlock(&sta->ampdu_mlme.mtx);
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -205,7 +205,7 @@ static ssize_t sta_agg_status_read(struc
p += scnprintf(p, sizeof(buf) + buf - p, "%02d", i);
p += scnprintf(p, sizeof(buf) + buf - p, "\t\t%x", !!tid_rx);
p += scnprintf(p, sizeof(buf) + buf - p, "\t%#.2x",
- tid_rx ? tid_rx->dialog_token : 0);
+ tid_rx ? sta->ampdu_mlme.tid_rx_token[i] : 0);
p += scnprintf(p, sizeof(buf) + buf - p, "\t%#.3x",
tid_rx ? tid_rx->ssn : 0);
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -184,7 +184,6 @@ struct tid_ampdu_tx {
* @ssn: Starting Sequence Number expected to be aggregated.
* @buf_size: buffer size for incoming A-MPDUs
* @timeout: reset timer value (in TUs).
- * @dialog_token: dialog token for aggregation session
* @rcu_head: RCU head used for freeing this struct
* @reorder_lock: serializes access to reorder buffer, see below.
* @auto_seq: used for offloaded BA sessions to automatically pick head_seq_and
@@ -213,7 +212,6 @@ struct tid_ampdu_rx {
u16 ssn;
u16 buf_size;
u16 timeout;
- u8 dialog_token;
bool auto_seq;
bool removed;
};
@@ -225,6 +223,7 @@ struct tid_ampdu_rx {
* to tid_tx[idx], which are protected by the sta spinlock)
* tid_start_tx is also protected by sta->lock.
* @tid_rx: aggregation info for Rx per TID -- RCU protected
+ * @tid_rx_token: dialog tokens for valid aggregation sessions
* @tid_rx_timer_expired: bitmap indicating on which TIDs the
* RX timer expired until the work for it runs
* @tid_rx_stop_requested: bitmap indicating which BA sessions per TID the
@@ -243,6 +242,7 @@ struct sta_ampdu_mlme {
struct mutex mtx;
/* rx */
struct tid_ampdu_rx __rcu *tid_rx[IEEE80211_NUM_TIDS];
+ u8 tid_rx_token[IEEE80211_NUM_TIDS];
unsigned long tid_rx_timer_expired[BITS_TO_LONGS(IEEE80211_NUM_TIDS)];
unsigned long tid_rx_stop_requested[BITS_TO_LONGS(IEEE80211_NUM_TIDS)];
unsigned long agg_session_valid[BITS_TO_LONGS(IEEE80211_NUM_TIDS)];
Patches currently in stable-queue which might be from johannes.berg@intel.com are
queue-4.9/nl80211-use-different-attrs-for-bssid-and-random-mac-addr-in-scan-req.patch
queue-4.9/mac80211-fix-tid_agg_rx-null-dereference.patch
queue-4.9/mac80211-initialize-fast-xmit-info-later.patch
reply other threads:[~2017-01-09 12:07 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=148396364711229@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=emmanuel.grumbach@intel.com \
--cc=johannes.berg@intel.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).