Patch "clk: sunxi-ng: sun8i-h3: Set CLK_SET_RATE_PARENT for audio module clocks" has been added to the 4.9-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    clk: sunxi-ng: sun8i-h3: Set CLK_SET_RATE_PARENT for audio module clocks

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     clk-sunxi-ng-sun8i-h3-set-clk_set_rate_parent-for-audio-module-clocks.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 0f6f9302b819ca352cfd4f42c18ec08d521f9cae Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Fri, 11 Nov 2016 18:05:58 +0800
Subject: clk: sunxi-ng: sun8i-h3: Set CLK_SET_RATE_PARENT for audio module clocks

From: Chen-Yu Tsai <wens@csie.org>

commit 0f6f9302b819ca352cfd4f42c18ec08d521f9cae upstream.

The audio module clocks are supposed to be set according to the sample
rate of the audio stream. The audio PLL provides the clock signal for
these module clocks, and only it is freely tunable.

Set CLK_SET_RATE_PARENT for the audio module clocks so their users can
properly tune the clock rate.

Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
@@ -394,16 +394,16 @@ static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_c
 static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
 					    "pll-audio-2x", "pll-audio" };
 static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
-			       0x0b0, 16, 2, BIT(31), 0);
+			       0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
 
 static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
-			       0x0b4, 16, 2, BIT(31), 0);
+			       0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
 
 static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", i2s_parents,
-			       0x0b8, 16, 2, BIT(31), 0);
+			       0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
 
 static SUNXI_CCU_M_WITH_GATE(spdif_clk, "spdif", "pll-audio",
-			     0x0c0, 0, 4, BIT(31), 0);
+			     0x0c0, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
 
 static SUNXI_CCU_GATE(usb_phy0_clk,	"usb-phy0",	"osc24M",
 		      0x0cc, BIT(8), 0);
@@ -466,7 +466,7 @@ static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve
 			     0x13c, 16, 3, BIT(31), 0);
 
 static SUNXI_CCU_GATE(ac_dig_clk,	"ac-dig",	"pll-audio",
-		      0x140, BIT(31), 0);
+		      0x140, BIT(31), CLK_SET_RATE_PARENT);
 static SUNXI_CCU_GATE(avs_clk,		"avs",		"osc24M",
 		      0x144, BIT(31), 0);
 


Patches currently in stable-queue which might be from wens@csie.org are

queue-4.9/arm-dts-sun7i-bananapi-m1-plus-enable-usb-phy-for-usb-host-support.patch
queue-4.9/clk-sunxi-ng-sun8i-h3-set-clk_set_rate_parent-for-audio-module-clocks.patch
queue-4.9/clk-sunxi-ng-sun8i-a23-set-clk_set_rate_parent-for-audio-module-clocks.patch