From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.linuxfoundation.org ([140.211.169.12]:58352 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750768AbdALRSg (ORCPT ); Thu, 12 Jan 2017 12:18:36 -0500 Subject: patch "USB: serial: ch341: fix open and resume after B0" added to usb-linus To: johan@kernel.org, stable@vger.kernel.org From: Date: Thu, 12 Jan 2017 18:18:50 +0100 Message-ID: <1484241530133240@kroah.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ANSI_X3.4-1968 Content-Transfer-Encoding: 8bit Sender: stable-owner@vger.kernel.org List-ID: This is a note to let you know that I've just added the patch titled USB: serial: ch341: fix open and resume after B0 to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >>From a20047f36e2f6a1eea4f1fd261aaa55882369868 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 6 Jan 2017 19:15:11 +0100 Subject: USB: serial: ch341: fix open and resume after B0 The private baud_rate variable is used to configure the port at open and reset-resume and must never be set to (and left at) zero or reset-resume and all further open attempts will fail. Fixes: aa91def41a7b ("USB: ch341: set tty baud speed according to tty struct") Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ch341.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index d133e72fe888..6279df905c14 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -355,7 +355,6 @@ static void ch341_set_termios(struct tty_struct *tty, baud_rate = tty_get_baud_rate(tty); - priv->baud_rate = baud_rate; ctrl = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX; switch (C_CSIZE(tty)) { @@ -388,6 +387,9 @@ static void ch341_set_termios(struct tty_struct *tty, spin_lock_irqsave(&priv->lock, flags); priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); spin_unlock_irqrestore(&priv->lock, flags); + + priv->baud_rate = baud_rate; + r = ch341_init_set_baudrate(port->serial->dev, priv, ctrl); if (r < 0 && old_termios) { priv->baud_rate = tty_termios_baud_rate(old_termios); -- 2.11.0