From: <gregkh@linuxfoundation.org>
To: afd@ti.com, broonie@kernel.org, gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "regulator: tps65086: Fix 25mV ranges for BUCK regulators" has been added to the 4.9-stable tree
Date: Sun, 15 Jan 2017 17:39:53 +0100 [thread overview]
Message-ID: <148449839311881@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
regulator: tps65086: Fix 25mV ranges for BUCK regulators
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
regulator-tps65086-fix-25mv-ranges-for-buck-regulators.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From d8ca5bd158f738c4fa6974ee388c381f64db7905 Mon Sep 17 00:00:00 2001
From: "Andrew F. Davis" <afd@ti.com>
Date: Thu, 1 Dec 2016 10:44:16 -0600
Subject: regulator: tps65086: Fix 25mV ranges for BUCK regulators
From: Andrew F. Davis <afd@ti.com>
commit d8ca5bd158f738c4fa6974ee388c381f64db7905 upstream.
The BUCK regulators 3, 4, and 5 also have a 10mV step mode,
adjust the tables and logic to reflect the data-sheet for
these regulators.
fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/devicetree/bindings/mfd/tps65086.txt | 2
drivers/regulator/tps65086-regulator.c | 54 ++++++++++-----------
2 files changed, 29 insertions(+), 27 deletions(-)
--- a/Documentation/devicetree/bindings/mfd/tps65086.txt
+++ b/Documentation/devicetree/bindings/mfd/tps65086.txt
@@ -23,7 +23,7 @@ Required properties:
defined below.
Optional regulator properties:
- - ti,regulator-step-size-25mv : This is applicable for buck[1,2,6], set this
+ - ti,regulator-step-size-25mv : This is applicable for buck[1-6], set this
if the regulator is factory set with a 25mv
step voltage mapping.
- ti,regulator-decay : This is applicable for buck[1-6], set this if
--- a/drivers/regulator/tps65086-regulator.c
+++ b/drivers/regulator/tps65086-regulator.c
@@ -71,18 +71,17 @@ struct tps65086_regulator {
unsigned int decay_mask;
};
-static const struct regulator_linear_range tps65086_buck126_10mv_ranges[] = {
+static const struct regulator_linear_range tps65086_10mv_ranges[] = {
REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
REGULATOR_LINEAR_RANGE(410000, 0x1, 0x7F, 10000),
};
static const struct regulator_linear_range tps65086_buck126_25mv_ranges[] = {
- REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
- REGULATOR_LINEAR_RANGE(1000000, 0x1, 0x18, 0),
+ REGULATOR_LINEAR_RANGE(1000000, 0x0, 0x18, 0),
REGULATOR_LINEAR_RANGE(1025000, 0x19, 0x7F, 25000),
};
-static const struct regulator_linear_range tps65086_buck345_ranges[] = {
+static const struct regulator_linear_range tps65086_buck345_25mv_ranges[] = {
REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
REGULATOR_LINEAR_RANGE(425000, 0x1, 0x7F, 25000),
};
@@ -125,27 +124,27 @@ static int tps65086_of_parse_cb(struct d
static struct tps65086_regulator regulators[] = {
TPS65086_REGULATOR("BUCK1", "buck1", BUCK1, 0x80, TPS65086_BUCK1CTRL,
BUCK_VID_MASK, TPS65086_BUCK123CTRL, BIT(0),
- tps65086_buck126_10mv_ranges, TPS65086_BUCK1CTRL,
+ tps65086_10mv_ranges, TPS65086_BUCK1CTRL,
BIT(0)),
TPS65086_REGULATOR("BUCK2", "buck2", BUCK2, 0x80, TPS65086_BUCK2CTRL,
BUCK_VID_MASK, TPS65086_BUCK123CTRL, BIT(1),
- tps65086_buck126_10mv_ranges, TPS65086_BUCK2CTRL,
+ tps65086_10mv_ranges, TPS65086_BUCK2CTRL,
BIT(0)),
TPS65086_REGULATOR("BUCK3", "buck3", BUCK3, 0x80, TPS65086_BUCK3VID,
BUCK_VID_MASK, TPS65086_BUCK123CTRL, BIT(2),
- tps65086_buck345_ranges, TPS65086_BUCK3DECAY,
+ tps65086_10mv_ranges, TPS65086_BUCK3DECAY,
BIT(0)),
TPS65086_REGULATOR("BUCK4", "buck4", BUCK4, 0x80, TPS65086_BUCK4VID,
BUCK_VID_MASK, TPS65086_BUCK4CTRL, BIT(0),
- tps65086_buck345_ranges, TPS65086_BUCK4VID,
+ tps65086_10mv_ranges, TPS65086_BUCK4VID,
BIT(0)),
TPS65086_REGULATOR("BUCK5", "buck5", BUCK5, 0x80, TPS65086_BUCK5VID,
BUCK_VID_MASK, TPS65086_BUCK5CTRL, BIT(0),
- tps65086_buck345_ranges, TPS65086_BUCK5CTRL,
+ tps65086_10mv_ranges, TPS65086_BUCK5CTRL,
BIT(0)),
TPS65086_REGULATOR("BUCK6", "buck6", BUCK6, 0x80, TPS65086_BUCK6VID,
BUCK_VID_MASK, TPS65086_BUCK6CTRL, BIT(0),
- tps65086_buck126_10mv_ranges, TPS65086_BUCK6CTRL,
+ tps65086_10mv_ranges, TPS65086_BUCK6CTRL,
BIT(0)),
TPS65086_REGULATOR("LDOA1", "ldoa1", LDOA1, 0xF, TPS65086_LDOA1CTRL,
VDOA1_VID_MASK, TPS65086_LDOA1CTRL, BIT(0),
@@ -162,18 +161,6 @@ static struct tps65086_regulator regulat
TPS65086_SWITCH("VTT", "vtt", VTT, TPS65086_SWVTT_EN, BIT(4)),
};
-static inline bool has_25mv_mode(int id)
-{
- switch (id) {
- case BUCK1:
- case BUCK2:
- case BUCK6:
- return true;
- default:
- return false;
- }
-}
-
static int tps65086_of_parse_cb(struct device_node *dev,
const struct regulator_desc *desc,
struct regulator_config *config)
@@ -181,12 +168,27 @@ static int tps65086_of_parse_cb(struct d
int ret;
/* Check for 25mV step mode */
- if (has_25mv_mode(desc->id) &&
- of_property_read_bool(config->of_node, "ti,regulator-step-size-25mv")) {
- regulators[desc->id].desc.linear_ranges =
+ if (of_property_read_bool(config->of_node, "ti,regulator-step-size-25mv")) {
+ switch (desc->id) {
+ case BUCK1:
+ case BUCK2:
+ case BUCK6:
+ regulators[desc->id].desc.linear_ranges =
tps65086_buck126_25mv_ranges;
- regulators[desc->id].desc.n_linear_ranges =
+ regulators[desc->id].desc.n_linear_ranges =
ARRAY_SIZE(tps65086_buck126_25mv_ranges);
+ break;
+ case BUCK3:
+ case BUCK4:
+ case BUCK5:
+ regulators[desc->id].desc.linear_ranges =
+ tps65086_buck345_25mv_ranges;
+ regulators[desc->id].desc.n_linear_ranges =
+ ARRAY_SIZE(tps65086_buck345_25mv_ranges);
+ break;
+ default:
+ dev_warn(config->dev, "25mV step mode only valid for BUCK regulators\n");
+ }
}
/* Check for decay mode */
Patches currently in stable-queue which might be from afd@ti.com are
queue-4.9/regulator-tps65086-fix-25mv-ranges-for-buck-regulators.patch
reply other threads:[~2017-01-15 16:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=148449839311881@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=afd@ti.com \
--cc=broonie@kernel.org \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).