Patch "ARM: 8634/1: hw_breakpoint: blacklist Scorpion CPUs" has been added to the 4.9-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    ARM: 8634/1: hw_breakpoint: blacklist Scorpion CPUs

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm-8634-1-hw_breakpoint-blacklist-scorpion-cpus.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From ddc37832a1349f474c4532de381498020ed71d31 Mon Sep 17 00:00:00 2001
From: Mark Rutland <mark.rutland@arm.com>
Date: Fri, 6 Jan 2017 13:12:47 +0100
Subject: ARM: 8634/1: hw_breakpoint: blacklist Scorpion CPUs

From: Mark Rutland <mark.rutland@arm.com>

commit ddc37832a1349f474c4532de381498020ed71d31 upstream.

On APQ8060, the kernel crashes in arch_hw_breakpoint_init, taking an
undefined instruction trap within write_wb_reg. This is because Scorpion
CPUs erroneously appear to set DBGPRSR.SPD when WFI is issued, even if
the core is not powered down. When DBGPRSR.SPD is set, breakpoint and
watchpoint registers are treated as undefined.

It's possible to trigger similar crashes later on from userspace, by
requesting the kernel to install a breakpoint or watchpoint, as we can
go idle at any point between the reset of the debug registers and their
later use. This has always been the case.

Given that this has always been broken, no-one has complained until now,
and there is no clear workaround, disable hardware breakpoints and
watchpoints on Scorpion to avoid these issues.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/include/asm/cputype.h  |    3 +++
 arch/arm/kernel/hw_breakpoint.c |   16 ++++++++++++++++
 2 files changed, 19 insertions(+)

--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -94,6 +94,9 @@
 #define ARM_CPU_XSCALE_ARCH_V2		0x4000
 #define ARM_CPU_XSCALE_ARCH_V3		0x6000
 
+/* Qualcomm implemented cores */
+#define ARM_CPU_PART_SCORPION		0x510002d0
+
 extern unsigned int processor_id;
 
 #ifdef CONFIG_CPU_CP15
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -1066,6 +1066,22 @@ static int __init arch_hw_breakpoint_ini
 		return 0;
 	}
 
+	/*
+	 * Scorpion CPUs (at least those in APQ8060) seem to set DBGPRSR.SPD
+	 * whenever a WFI is issued, even if the core is not powered down, in
+	 * violation of the architecture.  When DBGPRSR.SPD is set, accesses to
+	 * breakpoint and watchpoint registers are treated as undefined, so
+	 * this results in boot time and runtime failures when these are
+	 * accessed and we unexpectedly take a trap.
+	 *
+	 * It's not clear if/how this can be worked around, so we blacklist
+	 * Scorpion CPUs to avoid these issues.
+	*/
+	if (read_cpuid_part() == ARM_CPU_PART_SCORPION) {
+		pr_info("Scorpion CPU detected. Hardware breakpoints and watchpoints disabled\n");
+		return 0;
+	}
+
 	has_ossr = core_has_os_save_restore();
 
 	/* Determine how many BRPs/WRPs are available. */


Patches currently in stable-queue which might be from mark.rutland@arm.com are

queue-4.9/arm-8634-1-hw_breakpoint-blacklist-scorpion-cpus.patch
queue-4.9/arm64-avoid-returning-from-bad_mode.patch