Patch "ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available." has been added to the 4.9-stable tree

Patch "ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available." has been added to the 4.9-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available.

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm-dts-omap5-dra7-indicate-that-sata-port-0-is-available.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 87cb12910a2ab6ed41ae951ea4d9c1cc1120199a Mon Sep 17 00:00:00 2001
From: Jean-Jacques Hiblot <jjhiblot@ti.com>
Date: Mon, 9 Jan 2017 13:22:15 +0100
Subject: ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available.

From: Jean-Jacques Hiblot <jjhiblot@ti.com>

commit 87cb12910a2ab6ed41ae951ea4d9c1cc1120199a upstream.

AHCI provides the register PORTS_IMPL to let the software know which port
is supported. The register must be initialized by the bootloader. However
in some cases u-boot doesn't properly initialize this value (if it is not
compiled with SATA support for example or if the SATA initialization fails).
The DTS entry "ports-implemented" can be used to override the value in
PORTS_IMPL.

Without this patch the SATA will not work in the following two cases:

* if there has been a failure to initialize SATA in u-boot.

* if ahci_platform module has been removed and re-inserted. The reason is
  that the content of PORTS_IMPL is lost after the module is removed.
  I suspect that it's because the controller is reset by the hwmod.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
[tony@atomide.com: updated comments with what goes wrong]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/dra7.dtsi  |    1 +
 arch/arm/boot/dts/omap5.dtsi |    1 +
 2 files changed, 2 insertions(+)

--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1376,6 +1376,7 @@
 			phy-names = "sata-phy";
 			clocks = <&sata_ref_clk>;
 			ti,hwmods = "sata";
+			ports-implemented = <0x1>;
 		};
 
 		rtc: rtc@48838000 {
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -985,6 +985,7 @@
 			phy-names = "sata-phy";
 			clocks = <&sata_ref_clk>;
 			ti,hwmods = "sata";
+			ports-implemented = <0x1>;
 		};
 
 		dss: dss@58000000 {


Patches currently in stable-queue which might be from jjhiblot@ti.com are

queue-4.9/arm-dts-omap5-dra7-indicate-that-sata-port-0-is-available.patch