patch "serial: 8250_pci: Add MKS Tenta SCOM-0800 and SCOM-0801 cards" added to tty-next

patch "serial: 8250_pci: Add MKS Tenta SCOM-0800 and SCOM-0801 cards" added to tty-next

[gregkh]

This is a note to let you know that I've just added the patch titled

    serial: 8250_pci: Add MKS Tenta SCOM-0800 and SCOM-0801 cards

to my tty git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
in the tty-next branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will also be merged in the next major kernel release
during the merge window.

If you have any questions about this process, please let me know.


>From 1c9c858e2ff8ae8024a3d75d2ed080063af43754 Mon Sep 17 00:00:00 2001
From: Ian Abbott <abbotti@mev.co.uk>
Date: Fri, 3 Feb 2017 20:25:00 +0000
Subject: serial: 8250_pci: Add MKS Tenta SCOM-0800 and SCOM-0801 cards

The MKS Instruments SCOM-0800 and SCOM-0801 cards (originally by Tenta
Technologies) are 3U CompactPCI serial cards with 4 and 8 serial ports,
respectively.  The first 4 ports are implemented by an OX16PCI954 chip,
and the second 4 ports are implemented by an OX16C954 chip on a local
bus, bridged by the second PCI function of the OX16PCI954.  The ports
are jumper-selectable as RS-232 and RS-422/485, and the UARTs use a
non-standard oscillator frequency of 20 MHz (base_baud = 1250000).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_pci.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 3eb638c35ba1..0b63109d8750 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2577,6 +2577,8 @@ enum pci_board_num_t {
 	pbn_b0_4_1152000_200,
 	pbn_b0_8_1152000_200,
 
+	pbn_b0_4_1250000,
+
 	pbn_b0_2_1843200,
 	pbn_b0_4_1843200,
 
@@ -2799,6 +2801,13 @@ static struct pciserial_board pci_boards[] = {
 		.uart_offset	= 0x200,
 	},
 
+	[pbn_b0_4_1250000] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 4,
+		.base_baud	= 1250000,
+		.uart_offset	= 8,
+	},
+
 	[pbn_b0_2_1843200] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 2,
@@ -5264,6 +5273,10 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{ PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 },
 	{ PCI_DEVICE(0x1c29, 0x1112), .driver_data = pbn_fintek_12 },
 
+	/* MKS Tenta SCOM-080x serial cards */
+	{ PCI_DEVICE(0x1601, 0x0800), .driver_data = pbn_b0_4_1250000 },
+	{ PCI_DEVICE(0x1601, 0xa801), .driver_data = pbn_b0_4_1250000 },
+
 	/*
 	 * These entries match devices with class COMMUNICATION_SERIAL,
 	 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
-- 
2.11.1