stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: imre.deak@intel.com, daniel.vetter@ffwll.ch,
	gregkh@linuxfoundation.org, jani.nikula@intel.com,
	jani.nikula@linux.intel.com, shashank.sharma@intel.com,
	ville.syrjala@linux.intel.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "drm/i915/gen9+: Enable hotplug detection early" has been added to the 4.10-stable tree
Date: Mon, 20 Mar 2017 17:40:47 +0100	[thread overview]
Message-ID: <1490028047244144@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    drm/i915/gen9+: Enable hotplug detection early

to the 4.10-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     drm-i915-gen9-enable-hotplug-detection-early.patch
and it can be found in the queue-4.10 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 2a57d9cce1c08578097d965468e37f06d71fa495 Mon Sep 17 00:00:00 2001
From: Imre Deak <imre.deak@intel.com>
Date: Fri, 27 Jan 2017 11:39:18 +0200
Subject: drm/i915/gen9+: Enable hotplug detection early
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

From: Imre Deak <imre.deak@intel.com>

commit 2a57d9cce1c08578097d965468e37f06d71fa495 upstream.

For LSPCON resume time initialization we need to sample the
corresponding pin's HPD level, but this is only available when HPD
detection is enabled. Currently we enable detection only when enabling
HPD interrupts which is too late, so bring the enabling of detection
earlier.

This is needed by the next patch.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485509961-9010-2-git-send-email-imre.deak@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(rebased onto v4.10.4 due to missing s/IS_BROXTON/IS_GEN9_LP/ upstream change)
(corrected stable tag)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/i915_irq.c |   69 ++++++++++++++++++++++++++++------------
 1 file changed, 50 insertions(+), 19 deletions(-)

--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -3089,19 +3089,16 @@ static void ibx_hpd_irq_setup(struct drm
 	I915_WRITE(PCH_PORT_HOTPLUG, hotplug);
 }
 
-static void spt_hpd_irq_setup(struct drm_i915_private *dev_priv)
+static void spt_hpd_detection_setup(struct drm_i915_private *dev_priv)
 {
-	u32 hotplug_irqs, hotplug, enabled_irqs;
-
-	hotplug_irqs = SDE_HOTPLUG_MASK_SPT;
-	enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_spt);
-
-	ibx_display_interrupt_update(dev_priv, hotplug_irqs, enabled_irqs);
+	u32 hotplug;
 
 	/* Enable digital hotplug on the PCH */
 	hotplug = I915_READ(PCH_PORT_HOTPLUG);
-	hotplug |= PORTD_HOTPLUG_ENABLE | PORTC_HOTPLUG_ENABLE |
-		PORTB_HOTPLUG_ENABLE | PORTA_HOTPLUG_ENABLE;
+	hotplug |= PORTA_HOTPLUG_ENABLE |
+		   PORTB_HOTPLUG_ENABLE |
+		   PORTC_HOTPLUG_ENABLE |
+		   PORTD_HOTPLUG_ENABLE;
 	I915_WRITE(PCH_PORT_HOTPLUG, hotplug);
 
 	hotplug = I915_READ(PCH_PORT_HOTPLUG2);
@@ -3109,6 +3106,18 @@ static void spt_hpd_irq_setup(struct drm
 	I915_WRITE(PCH_PORT_HOTPLUG2, hotplug);
 }
 
+static void spt_hpd_irq_setup(struct drm_i915_private *dev_priv)
+{
+	u32 hotplug_irqs, enabled_irqs;
+
+	hotplug_irqs = SDE_HOTPLUG_MASK_SPT;
+	enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_spt);
+
+	ibx_display_interrupt_update(dev_priv, hotplug_irqs, enabled_irqs);
+
+	spt_hpd_detection_setup(dev_priv);
+}
+
 static void ilk_hpd_irq_setup(struct drm_i915_private *dev_priv)
 {
 	u32 hotplug_irqs, hotplug, enabled_irqs;
@@ -3143,18 +3152,15 @@ static void ilk_hpd_irq_setup(struct drm
 	ibx_hpd_irq_setup(dev_priv);
 }
 
-static void bxt_hpd_irq_setup(struct drm_i915_private *dev_priv)
+static void __bxt_hpd_detection_setup(struct drm_i915_private *dev_priv,
+				      u32 enabled_irqs)
 {
-	u32 hotplug_irqs, hotplug, enabled_irqs;
-
-	enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_bxt);
-	hotplug_irqs = BXT_DE_PORT_HOTPLUG_MASK;
-
-	bdw_update_port_irq(dev_priv, hotplug_irqs, enabled_irqs);
+	u32 hotplug;
 
 	hotplug = I915_READ(PCH_PORT_HOTPLUG);
-	hotplug |= PORTC_HOTPLUG_ENABLE | PORTB_HOTPLUG_ENABLE |
-		PORTA_HOTPLUG_ENABLE;
+	hotplug |= PORTA_HOTPLUG_ENABLE |
+		   PORTB_HOTPLUG_ENABLE |
+		   PORTC_HOTPLUG_ENABLE;
 
 	DRM_DEBUG_KMS("Invert bit setting: hp_ctl:%x hp_port:%x\n",
 		      hotplug, enabled_irqs);
@@ -3164,7 +3170,6 @@ static void bxt_hpd_irq_setup(struct drm
 	 * For BXT invert bit has to be set based on AOB design
 	 * for HPD detection logic, update it based on VBT fields.
 	 */
-
 	if ((enabled_irqs & BXT_DE_PORT_HP_DDIA) &&
 	    intel_bios_is_port_hpd_inverted(dev_priv, PORT_A))
 		hotplug |= BXT_DDIA_HPD_INVERT;
@@ -3178,6 +3183,23 @@ static void bxt_hpd_irq_setup(struct drm
 	I915_WRITE(PCH_PORT_HOTPLUG, hotplug);
 }
 
+static void bxt_hpd_detection_setup(struct drm_i915_private *dev_priv)
+{
+	__bxt_hpd_detection_setup(dev_priv, BXT_DE_PORT_HOTPLUG_MASK);
+}
+
+static void bxt_hpd_irq_setup(struct drm_i915_private *dev_priv)
+{
+	u32 hotplug_irqs, enabled_irqs;
+
+	enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_bxt);
+	hotplug_irqs = BXT_DE_PORT_HOTPLUG_MASK;
+
+	bdw_update_port_irq(dev_priv, hotplug_irqs, enabled_irqs);
+
+	__bxt_hpd_detection_setup(dev_priv, enabled_irqs);
+}
+
 static void ibx_irq_postinstall(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = to_i915(dev);
@@ -3193,6 +3215,12 @@ static void ibx_irq_postinstall(struct d
 
 	gen5_assert_iir_is_zero(dev_priv, SDEIIR);
 	I915_WRITE(SDEIMR, ~mask);
+
+	if (HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv) ||
+	    HAS_PCH_LPT(dev_priv))
+		; /* TODO: Enable HPD detection on older PCH platforms too */
+	else
+		spt_hpd_detection_setup(dev_priv);
 }
 
 static void gen5_gt_irq_postinstall(struct drm_device *dev)
@@ -3404,6 +3432,9 @@ static void gen8_de_irq_postinstall(stru
 
 	GEN5_IRQ_INIT(GEN8_DE_PORT_, ~de_port_masked, de_port_enables);
 	GEN5_IRQ_INIT(GEN8_DE_MISC_, ~de_misc_masked, de_misc_masked);
+
+	if (IS_BROXTON(dev_priv))
+		bxt_hpd_detection_setup(dev_priv);
 }
 
 static int gen8_irq_postinstall(struct drm_device *dev)


Patches currently in stable-queue which might be from imre.deak@intel.com are

queue-4.10/drm-i915-lspcon-fix-resume-time-initialization-due-to-unasserted-hpd.patch
queue-4.10/drm-i915-lspcon-enable-aux-interrupts-for-resume-time-initialization.patch
queue-4.10/drm-i915-gen9-enable-hotplug-detection-early.patch

                 reply	other threads:[~2017-03-20 17:17 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1490028047244144@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=daniel.vetter@ffwll.ch \
    --cc=imre.deak@intel.com \
    --cc=jani.nikula@intel.com \
    --cc=jani.nikula@linux.intel.com \
    --cc=shashank.sharma@intel.com \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).