[PATCH v3 2/3] xhci: Set URB actual length for stopped control transfers

[Mathias Nyman <mathias.nyman@linux.intel.com>]

A control transfer that stopped at the status stage incorrectly
warned about a "unexpected TRB Type 4", and did not set the
transferred actual_length for the URB.

The URB actual_length for control transfers should contain the
bytes transferred in the data stage.

Bytes of a partially sent setup stage and missing bytes from
status stage should be left out.

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-ring.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index d9936c7..a3309aa 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1989,6 +1989,9 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		case TRB_NORMAL:
 			td->urb->actual_length = requested - remaining;
 			goto finish_td;
+		case TRB_STATUS:
+			td->urb->actual_length = requested;
+			goto finish_td;
 		default:
 			xhci_warn(xhci, "WARN: unexpected TRB Type %d\n",
 				  trb_type);
-- 
1.9.1