From: <gregkh@linuxfoundation.org>
To: jon.mason@broadcom.com, f.fainelli@gmail.com, gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "ARM: dts: NSP: GPIO reboot open-source" has been added to the 4.10-stable tree
Date: Tue, 09 May 2017 11:19:34 +0200 [thread overview]
Message-ID: <1494321574252158@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
ARM: dts: NSP: GPIO reboot open-source
to the 4.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-dts-nsp-gpio-reboot-open-source.patch
and it can be found in the queue-4.10 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From acfa28b3649ec07775efaac0c00de2db39d71634 Mon Sep 17 00:00:00 2001
From: Jon Mason <jon.mason@broadcom.com>
Date: Wed, 1 Mar 2017 18:02:28 -0500
Subject: ARM: dts: NSP: GPIO reboot open-source
From: Jon Mason <jon.mason@broadcom.com>
commit acfa28b3649ec07775efaac0c00de2db39d71634 upstream.
The libgpio code pre-sets the GPIO values for the gpio-reset in the
device tree. This results in the device being reset during bringup.
To prevent this pre-setting, use the "open-source" flag in the device
tree.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: b1aaf88 ("ARM: dts: NSP: Add GPIO reboot method to bcm958625hr DTS file")
Fixes: 10baed1 ("ARM: dts: NSP: Add GPIO reboot method to bcm958625xmc DTS file")
Fixes: 088e3148 ("ARM: dts: NSP: Add new DT file for bcm958522er")
Fixes: e3227c1 ("ARM: dts: NSP: Add new DT file for bcm958525er")
Fixes: 2f8bc00 ("ARM: dts: NSP: Add new DT file for bcm958622hr")
Fixes: d454c37 ("ARM: dts: NSP: Add new DT file for bcm958623hr")
Fixes: f27eacf ("ARM: dts: NSP: Add new DT file for bcm988312hr")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/bcm958522er.dts | 1 +
arch/arm/boot/dts/bcm958525er.dts | 1 +
arch/arm/boot/dts/bcm958525xmc.dts | 1 +
arch/arm/boot/dts/bcm958622hr.dts | 1 +
arch/arm/boot/dts/bcm958623hr.dts | 1 +
arch/arm/boot/dts/bcm958625hr.dts | 1 +
arch/arm/boot/dts/bcm988312hr.dts | 1 +
7 files changed, 7 insertions(+)
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -55,6 +55,7 @@
gpio-restart {
compatible = "gpio-restart";
gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+ open-source;
priority = <200>;
};
};
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -55,6 +55,7 @@
gpio-restart {
compatible = "gpio-restart";
gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+ open-source;
priority = <200>;
};
};
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -55,6 +55,7 @@
gpio-restart {
compatible = "gpio-restart";
gpios = <&gpioa 31 GPIO_ACTIVE_LOW>;
+ open-source;
priority = <200>;
};
};
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -55,6 +55,7 @@
gpio-restart {
compatible = "gpio-restart";
gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+ open-source;
priority = <200>;
};
};
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -55,6 +55,7 @@
gpio-restart {
compatible = "gpio-restart";
gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+ open-source;
priority = <200>;
};
};
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -55,6 +55,7 @@
gpio-restart {
compatible = "gpio-restart";
gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+ open-source;
priority = <200>;
};
};
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -55,6 +55,7 @@
gpio-restart {
compatible = "gpio-restart";
gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+ open-source;
priority = <200>;
};
};
Patches currently in stable-queue which might be from jon.mason@broadcom.com are
queue-4.10/arm-dts-nsp-gpio-reboot-open-source.patch
reply other threads:[~2017-05-09 9:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1494321574252158@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=f.fainelli@gmail.com \
--cc=jon.mason@broadcom.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).