Patch "power: supply: bq24190_charger: Fix irq trigger to IRQF_TRIGGER_FALLING" has been added to the 4.4-stable tree

Patch "power: supply: bq24190_charger: Fix irq trigger to IRQF_TRIGGER_FALLING" has been added to the 4.4-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    power: supply: bq24190_charger: Fix irq trigger to IRQF_TRIGGER_FALLING

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     power-supply-bq24190_charger-fix-irq-trigger-to-irqf_trigger_falling.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 767eee362fd72bb2ca44cc80419ca4b38c6d8369 Mon Sep 17 00:00:00 2001
From: Liam Breck <liam@networkimprov.net>
Date: Wed, 18 Jan 2017 09:26:48 -0800
Subject: power: supply: bq24190_charger: Fix irq trigger to IRQF_TRIGGER_FALLING

From: Liam Breck <liam@networkimprov.net>

commit 767eee362fd72bb2ca44cc80419ca4b38c6d8369 upstream.

The interrupt signal is TRIGGER_FALLING. This is is specified in the
data sheet PIN FUNCTIONS: "The INT pin sends active low, 256us
pulse to host to report charger device status and fault."

Also the direction can be seen in the data sheet Figure 37 "BQ24190
with D+/D- Detection and USB On-The-Go (OTG)" which shows a 10k
pull-up resistor installed for the sample configurations.

Fixes: d7bf353fd0aa3 ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/power/bq24190_charger.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/power/bq24190_charger.c
+++ b/drivers/power/bq24190_charger.c
@@ -1394,7 +1394,7 @@ static int bq24190_probe(struct i2c_clie
 
 	ret = devm_request_threaded_irq(dev, bdi->irq, NULL,
 			bq24190_irq_handler_thread,
-			IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 			"bq24190-charger", bdi);
 	if (ret < 0) {
 		dev_err(dev, "Can't set up irq handler\n");


Patches currently in stable-queue which might be from liam@networkimprov.net are

queue-4.4/power-supply-bq24190_charger-handle-fault-before-status-on-interrupt.patch
queue-4.4/power-supply-bq24190_charger-call-power_supply_changed-for-relevant-component.patch
queue-4.4/power-supply-bq24190_charger-install-irq_handler_thread-at-end-of-probe.patch
queue-4.4/power-supply-bq24190_charger-call-set_mode_host-on-pm_resume.patch
queue-4.4/power-supply-bq24190_charger-don-t-read-fault-register-outside-irq_handle_thread.patch
queue-4.4/power-supply-bq24190_charger-fix-irq-trigger-to-irqf_trigger_falling.patch