Patch "ARM: 8452/3: PJ4: make coprocessor access sequences buildable in Thumb2 mode" has been added to the 3.18-stable tree

Patch "ARM: 8452/3: PJ4: make coprocessor access sequences buildable in Thumb2 mode" has been added to the 3.18-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    ARM: 8452/3: PJ4: make coprocessor access sequences buildable in Thumb2 mode

to the 3.18-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm-8452-3-pj4-make-coprocessor-access-sequences-buildable-in-thumb2-mode.patch
and it can be found in the queue-3.18 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 5008efc83bf85b647aa1cbc44718b1675bbb7444 Mon Sep 17 00:00:00 2001
From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Date: Tue, 22 Dec 2015 08:24:59 +0100
Subject: ARM: 8452/3: PJ4: make coprocessor access sequences buildable in Thumb2 mode

From: Ard Biesheuvel <ard.biesheuvel@linaro.org>

commit 5008efc83bf85b647aa1cbc44718b1675bbb7444 upstream.

The PJ4 inline asm sequence to write to cp15 cannot be built in Thumb-2
mode, due to the way it performs arithmetic on the program counter, so it
is built in ARM mode instead. However, building C files in ARM mode under
CONFIG_THUMB2_KERNEL is problematic, since the instrumentation performed
by subsystems like ftrace does not expect having to deal with interworking
branches.

Since the sequence in question is simply a poor man's ISB instruction,
let's use a straight 'isb' instead when building in Thumb2 mode. Thumb2
implies V7, so 'isb' should always be supported in that case.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/kernel/Makefile  |    1 -
 arch/arm/kernel/pj4-cp0.c |    4 ++++
 2 files changed, 4 insertions(+), 1 deletion(-)

--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -84,7 +84,6 @@ obj-$(CONFIG_CPU_PJ4B)		+= pj4-cp0.o
 obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_regs.o
 obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o perf_event_cpu.o
-CFLAGS_pj4-cp0.o		:= -marm
 AFLAGS_iwmmxt.o			:= -Wa,-mcpu=iwmmxt
 obj-$(CONFIG_ARM_CPU_TOPOLOGY)  += topology.o
 
--- a/arch/arm/kernel/pj4-cp0.c
+++ b/arch/arm/kernel/pj4-cp0.c
@@ -66,9 +66,13 @@ static void __init pj4_cp_access_write(u
 
 	__asm__ __volatile__ (
 		"mcr	p15, 0, %1, c1, c0, 2\n\t"
+#ifdef CONFIG_THUMB2_KERNEL
+		"isb\n\t"
+#else
 		"mrc	p15, 0, %0, c1, c0, 2\n\t"
 		"mov	%0, %0\n\t"
 		"sub	pc, pc, #4\n\t"
+#endif
 		: "=r" (temp) : "r" (value));
 }
 


Patches currently in stable-queue which might be from ard.biesheuvel@linaro.org are

queue-3.18/arm-8452-3-pj4-make-coprocessor-access-sequences-buildable-in-thumb2-mode.patch

Patch "ARM: 8452/3: PJ4: make coprocessor access sequences buildable in Thumb2 mode" has been added to the 3.18-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    ARM: 8452/3: PJ4: make coprocessor access sequences buildable in Thumb2 mode

to the 3.18-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm-8452-3-pj4-make-coprocessor-access-sequences-buildable-in-thumb2-mode.patch
and it can be found in the queue-3.18 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 5008efc83bf85b647aa1cbc44718b1675bbb7444 Mon Sep 17 00:00:00 2001
From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Date: Tue, 22 Dec 2015 08:24:59 +0100
Subject: ARM: 8452/3: PJ4: make coprocessor access sequences buildable in Thumb2 mode

From: Ard Biesheuvel <ard.biesheuvel@linaro.org>

commit 5008efc83bf85b647aa1cbc44718b1675bbb7444 upstream.

The PJ4 inline asm sequence to write to cp15 cannot be built in Thumb-2
mode, due to the way it performs arithmetic on the program counter, so it
is built in ARM mode instead. However, building C files in ARM mode under
CONFIG_THUMB2_KERNEL is problematic, since the instrumentation performed
by subsystems like ftrace does not expect having to deal with interworking
branches.

Since the sequence in question is simply a poor man's ISB instruction,
let's use a straight 'isb' instead when building in Thumb2 mode. Thumb2
implies V7, so 'isb' should always be supported in that case.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/kernel/Makefile  |    1 -
 arch/arm/kernel/pj4-cp0.c |    4 ++++
 2 files changed, 4 insertions(+), 1 deletion(-)

--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -84,7 +84,6 @@ obj-$(CONFIG_CPU_PJ4B)		+= pj4-cp0.o
 obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_regs.o
 obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o perf_event_cpu.o
-CFLAGS_pj4-cp0.o		:= -marm
 AFLAGS_iwmmxt.o			:= -Wa,-mcpu=iwmmxt
 obj-$(CONFIG_ARM_CPU_TOPOLOGY)  += topology.o
 
--- a/arch/arm/kernel/pj4-cp0.c
+++ b/arch/arm/kernel/pj4-cp0.c
@@ -66,9 +66,13 @@ static void __init pj4_cp_access_write(u
 
 	__asm__ __volatile__ (
 		"mcr	p15, 0, %1, c1, c0, 2\n\t"
+#ifdef CONFIG_THUMB2_KERNEL
+		"isb\n\t"
+#else
 		"mrc	p15, 0, %0, c1, c0, 2\n\t"
 		"mov	%0, %0\n\t"
 		"sub	pc, pc, #4\n\t"
+#endif
 		: "=r" (temp) : "r" (value));
 }
 


Patches currently in stable-queue which might be from ard.biesheuvel@linaro.org are

queue-3.18/arm-8452-3-pj4-make-coprocessor-access-sequences-buildable-in-thumb2-mode.patch