From: <gregkh@linuxfoundation.org>
To: Larry.Finger@lwfinger.net, birming@realtek.com,
gregkh@linuxfoundation.org, kvalo@codeaurora.org,
max7255@gmail.com, pkshih@realtek.com, shaofu@realtek.com,
steventing@realtek.com, yhchuang@realtek.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "rtlwifi: rtl8821ae: setup 8812ae RFE according to device type" has been added to the 4.9-stable tree
Date: Mon, 22 May 2017 18:08:45 +0200 [thread overview]
Message-ID: <1495469325343@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
rtlwifi: rtl8821ae: setup 8812ae RFE according to device type
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
rtlwifi-rtl8821ae-setup-8812ae-rfe-according-to-device-type.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 46cfa2148e7371c537efff1a1c693e58f523089d Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Sun, 16 Apr 2017 19:32:07 -0500
Subject: rtlwifi: rtl8821ae: setup 8812ae RFE according to device type
From: Larry Finger <Larry.Finger@lwfinger.net>
commit 46cfa2148e7371c537efff1a1c693e58f523089d upstream.
Current channel switch implementation sets 8812ae RFE reg value assuming
that device always has type 2.
Extend possible RFE types set and write corresponding reg values.
Source for new code is
http://dlcdnet.asus.com/pub/ASUS/wireless/PCE-AC51/DR_PCE_AC51_20232801152016.zip
Signed-off-by: Maxim Samoylov <max7255@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c | 122 ++++++++++++++++---
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/reg.h | 1
2 files changed, 107 insertions(+), 16 deletions(-)
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
@@ -359,6 +359,107 @@ bool rtl8821ae_phy_rf_config(struct ieee
return rtl8821ae_phy_rf6052_config(hw);
}
+static void _rtl8812ae_phy_set_rfe_reg_24g(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ u8 tmp;
+
+ switch (rtlhal->rfe_type) {
+ case 3:
+ rtl_set_bbreg(hw, RA_RFE_PINMUX, BMASKDWORD, 0x54337770);
+ rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD, 0x54337770);
+ rtl_set_bbreg(hw, RA_RFE_INV, BMASKRFEINV, 0x010);
+ rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x010);
+ rtl_set_bbreg(hw, 0x900, 0x00000303, 0x1);
+ break;
+ case 4:
+ rtl_set_bbreg(hw, RA_RFE_PINMUX, BMASKDWORD, 0x77777777);
+ rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD, 0x77777777);
+ rtl_set_bbreg(hw, RA_RFE_INV, BMASKRFEINV, 0x001);
+ rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x001);
+ break;
+ case 5:
+ rtl_write_byte(rtlpriv, RA_RFE_PINMUX + 2, 0x77);
+ rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD, 0x77777777);
+ tmp = rtl_read_byte(rtlpriv, RA_RFE_INV + 3);
+ rtl_write_byte(rtlpriv, RA_RFE_INV + 3, tmp & ~0x1);
+ rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x000);
+ break;
+ case 1:
+ if (rtlpriv->btcoexist.bt_coexistence) {
+ rtl_set_bbreg(hw, RA_RFE_PINMUX, 0xffffff, 0x777777);
+ rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD,
+ 0x77777777);
+ rtl_set_bbreg(hw, RA_RFE_INV, 0x33f00000, 0x000);
+ rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x000);
+ break;
+ }
+ case 0:
+ case 2:
+ default:
+ rtl_set_bbreg(hw, RA_RFE_PINMUX, BMASKDWORD, 0x77777777);
+ rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD, 0x77777777);
+ rtl_set_bbreg(hw, RA_RFE_INV, BMASKRFEINV, 0x000);
+ rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x000);
+ break;
+ }
+}
+
+static void _rtl8812ae_phy_set_rfe_reg_5g(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ u8 tmp;
+
+ switch (rtlhal->rfe_type) {
+ case 0:
+ rtl_set_bbreg(hw, RA_RFE_PINMUX, BMASKDWORD, 0x77337717);
+ rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD, 0x77337717);
+ rtl_set_bbreg(hw, RA_RFE_INV, BMASKRFEINV, 0x010);
+ rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x010);
+ break;
+ case 1:
+ if (rtlpriv->btcoexist.bt_coexistence) {
+ rtl_set_bbreg(hw, RA_RFE_PINMUX, 0xffffff, 0x337717);
+ rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD,
+ 0x77337717);
+ rtl_set_bbreg(hw, RA_RFE_INV, 0x33f00000, 0x000);
+ rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x000);
+ } else {
+ rtl_set_bbreg(hw, RA_RFE_PINMUX, BMASKDWORD,
+ 0x77337717);
+ rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD,
+ 0x77337717);
+ rtl_set_bbreg(hw, RA_RFE_INV, BMASKRFEINV, 0x000);
+ rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x000);
+ }
+ break;
+ case 3:
+ rtl_set_bbreg(hw, RA_RFE_PINMUX, BMASKDWORD, 0x54337717);
+ rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD, 0x54337717);
+ rtl_set_bbreg(hw, RA_RFE_INV, BMASKRFEINV, 0x010);
+ rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x010);
+ rtl_set_bbreg(hw, 0x900, 0x00000303, 0x1);
+ break;
+ case 5:
+ rtl_write_byte(rtlpriv, RA_RFE_PINMUX + 2, 0x33);
+ rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD, 0x77337777);
+ tmp = rtl_read_byte(rtlpriv, RA_RFE_INV + 3);
+ rtl_write_byte(rtlpriv, RA_RFE_INV + 3, tmp | 0x1);
+ rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x010);
+ break;
+ case 2:
+ case 4:
+ default:
+ rtl_set_bbreg(hw, RA_RFE_PINMUX, BMASKDWORD, 0x77337777);
+ rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD, 0x77337777);
+ rtl_set_bbreg(hw, RA_RFE_INV, BMASKRFEINV, 0x010);
+ rtl_set_bbreg(hw, RB_RFE_INV, BMASKRFEINV, 0x010);
+ break;
+ }
+}
+
u32 phy_get_tx_swing_8812A(struct ieee80211_hw *hw, u8 band,
u8 rf_path)
{
@@ -553,14 +654,9 @@ void rtl8821ae_phy_switch_wirelessband(s
/* 0x82C[1:0] = 2b'00 */
rtl_set_bbreg(hw, 0x82c, 0x3, 0);
}
- if (rtlhal->hw_type == HARDWARE_TYPE_RTL8812AE) {
- rtl_set_bbreg(hw, RA_RFE_PINMUX, BMASKDWORD,
- 0x77777777);
- rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD,
- 0x77777777);
- rtl_set_bbreg(hw, RA_RFE_INV, 0x3ff00000, 0x000);
- rtl_set_bbreg(hw, RB_RFE_INV, 0x3ff00000, 0x000);
- }
+
+ if (rtlhal->hw_type == HARDWARE_TYPE_RTL8812AE)
+ _rtl8812ae_phy_set_rfe_reg_24g(hw);
rtl_set_bbreg(hw, RTXPATH, 0xf0, 0x1);
rtl_set_bbreg(hw, RCCK_RX, 0x0f000000, 0x1);
@@ -615,14 +711,8 @@ void rtl8821ae_phy_switch_wirelessband(s
/* 0x82C[1:0] = 2'b00 */
rtl_set_bbreg(hw, 0x82c, 0x3, 1);
- if (rtlhal->hw_type == HARDWARE_TYPE_RTL8812AE) {
- rtl_set_bbreg(hw, RA_RFE_PINMUX, BMASKDWORD,
- 0x77337777);
- rtl_set_bbreg(hw, RB_RFE_PINMUX, BMASKDWORD,
- 0x77337777);
- rtl_set_bbreg(hw, RA_RFE_INV, 0x3ff00000, 0x010);
- rtl_set_bbreg(hw, RB_RFE_INV, 0x3ff00000, 0x010);
- }
+ if (rtlhal->hw_type == HARDWARE_TYPE_RTL8812AE)
+ _rtl8812ae_phy_set_rfe_reg_5g(hw);
rtl_set_bbreg(hw, RTXPATH, 0xf0, 0);
rtl_set_bbreg(hw, RCCK_RX, 0x0f000000, 0xf);
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/reg.h
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/reg.h
@@ -2424,6 +2424,7 @@
#define BMASKH4BITS 0xf0000000
#define BMASKOFDM_D 0xffc00000
#define BMASKCCK 0x3f3f3f3f
+#define BMASKRFEINV 0x3ff00000
#define BRFREGOFFSETMASK 0xfffff
Patches currently in stable-queue which might be from Larry.Finger@lwfinger.net are
queue-4.9/rtlwifi-rtl8821ae-setup-8812ae-rfe-according-to-device-type.patch
reply other threads:[~2017-05-22 16:10 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1495469325343@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=Larry.Finger@lwfinger.net \
--cc=birming@realtek.com \
--cc=kvalo@codeaurora.org \
--cc=max7255@gmail.com \
--cc=pkshih@realtek.com \
--cc=shaofu@realtek.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=steventing@realtek.com \
--cc=yhchuang@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).