From: <gregkh@linuxfoundation.org>
To: kristina.martsenko@arm.com, catalin.marinas@arm.com,
mark.rutland@arm.com, stable@vger.kernel.org,
will.deacon@arm.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] arm64: hw_breakpoint: fix watchpoint matching for tagged" failed to apply to 4.4-stable tree
Date: Tue, 23 May 2017 16:33:32 +0200 [thread overview]
Message-ID: <1495550012201135@kroah.com> (raw)
The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 7dcd9dd8cebe9fa626af7e2358d03a37041a70fb Mon Sep 17 00:00:00 2001
From: Kristina Martsenko <kristina.martsenko@arm.com>
Date: Wed, 3 May 2017 16:37:46 +0100
Subject: [PATCH] arm64: hw_breakpoint: fix watchpoint matching for tagged
pointers
When we take a watchpoint exception, the address that triggered the
watchpoint is found in FAR_EL1. We compare it to the address of each
configured watchpoint to see which one was hit.
The configured watchpoint addresses are untagged, while the address in
FAR_EL1 will have an address tag if the data access was done using a
tagged address. The tag needs to be removed to compare the address to
the watchpoints.
Currently we don't remove it, and as a result can report the wrong
watchpoint as being hit (specifically, always either the highest TTBR0
watchpoint or lowest TTBR1 watchpoint). This patch removes the tag.
Fixes: d50240a5f6ce ("arm64: mm: permit use of tagged pointers at EL0")
Cc: <stable@vger.kernel.org> # 3.12.x-
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h
index 5308d696311b..0221029e27ff 100644
--- a/arch/arm64/include/asm/uaccess.h
+++ b/arch/arm64/include/asm/uaccess.h
@@ -106,9 +106,9 @@ static inline void set_fs(mm_segment_t fs)
})
/*
- * When dealing with data aborts or instruction traps we may end up with
- * a tagged userland pointer. Clear the tag to get a sane pointer to pass
- * on to access_ok(), for instance.
+ * When dealing with data aborts, watchpoints, or instruction traps we may end
+ * up with a tagged userland pointer. Clear the tag to get a sane pointer to
+ * pass on to access_ok(), for instance.
*/
#define untagged_addr(addr) sign_extend64(addr, 55)
diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c
index 0296e7924240..749f81779420 100644
--- a/arch/arm64/kernel/hw_breakpoint.c
+++ b/arch/arm64/kernel/hw_breakpoint.c
@@ -36,6 +36,7 @@
#include <asm/traps.h>
#include <asm/cputype.h>
#include <asm/system_misc.h>
+#include <asm/uaccess.h>
/* Breakpoint currently in use for each BRP. */
static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[ARM_MAX_BRP]);
@@ -721,6 +722,8 @@ static u64 get_distance_from_watchpoint(unsigned long addr, u64 val,
u64 wp_low, wp_high;
u32 lens, lene;
+ addr = untagged_addr(addr);
+
lens = __ffs(ctrl->len);
lene = __fls(ctrl->len);
reply other threads:[~2017-05-23 14:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1495550012201135@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=catalin.marinas@arm.com \
--cc=kristina.martsenko@arm.com \
--cc=mark.rutland@arm.com \
--cc=stable@vger.kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).